RACESPEC

A lot of the RB30ET VL guys are doing this, and does not seem to change things RACESPEC SALES TEAM

The man is correct once again. Previously used turbos from our experience, need heating to allow for the expansion of either the housing or cartridge to allow them to separate with the new turbos, its a matter of loosening the bolts and rotating, as they have not been exposed to the heat of the manifolds and engine bay, they have not contracted in and formed a tight seal yet I too would either use a copper, if not even better, lead Thanks RACESPEC SALES TEAM

SARD INJECTORS - $995 NISMO INJECTORS - $1050 MAGNAFUEL 2 PORT REGULATOR (700HP) - $315 All prices include delivery to your door Thanks RACESPEC SALES TEAM

Ronni If you plan on running that manifold with the GT3582R. It wont happen, the compressor fouls on the rocker cover. Biggest you can go with them is the GT3071R PS. We have new manifolds due in, that will change this Thanks RACESPEC SALES TEAM

PM sent Thanks Tarek RACESPEC

TiAL - 38mm $495 Delivered - 44mm $775 Delivered Turbonetics - Evolution and Deltagate $590 Delivered - Racegate $875 Delivered - NewGen 51mm INCONEL, the Ultimate Wastegate $1295 Delivered check out www.racespec.com.au for more information Thanks Tarek RACESPEC

I haven't checked yet I'm in Ballarat for the SWAP MEET Thanks Tarek RACESPEC

I will check this Thats right, only top halves, as longer runners are better for mid to high rev ranges and reponse shorter runners are not suitable, many will argue this point Thanks Tarek RACESPEC

They come mirror finished, but we can get them anodised if required at an extra cost ORDER ONLY, PAYMENT REQUIRED UPFRONT to be able to do this Thanks Tarek RACESPEC

And the verdict is in NO THEY CAN NOT BE USED ON THE NEO MOTORS But a NEO PLENUM is being developed, but it will be 4+ Months away Thanks Tarek RACESPEC

Speaking to them right now Thanks Tarek RACESPEC

Hey Guys PLAZAMAN has been synonomous in the automotive industry in Australia for such a long time, because of their level of dedication and the HIGH QUALITY second to none products that they produce. You will see most if not all their products on HIGH PROFILE Drag Racing Teams, which included the likes of - ROTORMASTER - PAC PERFORMANCE - TCR and the list continually grows. RACESPEC is proud to announce the arrival of PLAZMAMAN products into its fraternity and I'm sure you will be quickly convinced by the products themselves, that they are truely in a league of their own. We can supply their complete range of PLENUMS, INTERCOOLER PIPING KITS, INTERCOOLER KITS and Custom Racing Components. PLENUMS These have been thoroughly researched and designed through extensive street and track development to maximise performance, for all conditions. Ram Tube Length, taper and funnel design characteristics all work hand in hand to develop sharp throttle response, mid range torque and 7000+rpm horsepower increases. All utilise CNC machined components, mirror finished and an easy bolt on upgrade. RB20DET - $1195 RB25DET - $1195 VL RB30ET - $1050 Bolt on factory accelerator cable, idle motor and throttle body. XR6 and SR20 - coming soon, 2 months approx. We also have available complete PLENUM and INTERCOOLER KITS to suit VL VL RB30ET - $2495 Thanks Tarek RACESPEC

not to mention the increase in prices aswell Tarek RACESPEC

Like the guys have mentioned, We can do the 040 Intank Pumps for $235 Delivered. As for the Turbos, $2600 Delivered for 707160-5 350HP GTR Upgrade Turbochargers. SARD Injectors $1020 Delivered Tarek RACESPEC

This has been in the spanners for well over 2 years now, it should have been done earlier, but GARRETT have been constantly changing cast manufacturers, thus the delay As disco stated, late April/early May The backorders on them are HUGGGGGGGGGGGGGEEE to say the least Thanks Tarek RACESPEC

I've noticed a few guys using the GT4088R now, these have just been released in OZ, have been on back orders for several months Specifications Compressor Trim: 52 Inducer: 63.5mm A/R: 0.58 Turbine Trim:78 Exducer: 77mm A/R: 0.85, 0.95 and 1.06 They have a T4 base flange aswell Thanks Tarek RACESPEC

if you dont find one we have the BOSCH 040 600HP for $235 Delivered Thanks Tarek RACESPEC

Blitz Actually have an adaptor from the RB25 to the RB26 Plenum, retaining the 6 thorttle bodies aswell Cheers Tarek RACESPEC

each turbo application needs to be looked at differently. This is where you need to know engine flow rates to match it to the turbo, such that its too small or too big and most importantly - PREVENTING SURGE - MAXIMISING COMPRESSOR EFFICIENCY This can be done by plotting engine flow rates in cfm, against pressure and rpm range. Depending on the RPM and boost pressure you are running you can maximise your comp efficiency by using thos point on the comp map of the turbo Cheers Tarek RACESPEC

You can use the LT8S on the RB, but you will need to group 2 sets of Injectors together, as the LT8S only has 4 Injector drivers. The Plug and Play unit is only available in the LT12S format, as they have 6 injector & ignition drivers Thanks Tarek RACESPEC

Trim = (inducer/exducer)^2 x 100 Cheers Tarek RACESPEC

24psi CHeers Tarek RACESPEC

Sounds awesome mate Keep up the great work, is this based on the same CONSULT Interfaces and Software from Willem and PLMS Thanks Tarek RACESPEC

if you register on paypal, you will be able to use your mastercard system Thanks Tarek RACESPEC

I have several customers in GTRs using this setup - 2.5L Surge Tank, some with twin or single pump outlets - 044 pumps - Magnafuel 2 port Reg Check this out for further information RACESPEC FUEL COMPONENTS Thanks Tarek RACESPEC