silman

On hold pending payment within 1 hour

ON HOLD PENDING PAYMENT I'm selling a complete genuine leather trimmed (not vinyl!) interior from my Nissan 180SX as I'm wanting to turn the car into a track car only. Therefore these seats are not suitable for my application otherwise they wouldn't be for sale. These seats are located in Brisbane. These pics were taken when I had all of the seats in the car, just over a week ago, I have cleaned them since, and the mark on the rear drivers side seat does not exist anymore. The front seats are Recaro SR3 items from a JDM Honda Integra Type R and are on genuine Recaro rail mounts, mounted on S13/180SX factory rails. These seats do not allow you to move about, but are also very comfortable at the same time, even for bigger guys. The front seats are not some shitty retrim of the stock front seats that can be found for sale either. The rear seats are the standard 180SX items re-trimmed and include the full factory carpet attachment that covers the boot. I also have the gearlever leather surround and door trims. (the door inserts are not detachable from the door trim for those with S13/180sx) I don't want to stuff around with cheapass lowballers so the price is set low and is NOT negotiable. If these don't sell for this price, I'll be putting them into my S15. Sponsors sell these exact seats with tears and scuff marks, with these rails for $1650 pickup. I'm selling the whole leather setup including the front rails mounted, for $1500 pickup. Or you can buy the whole setup, but swap me your door trims (in perfect condition only) and non-type-x 180sx driver's seat for $1400 clean. Or you can buy the whole setup, but swap me your door trims (in perfect condition only) and 180SX Type-X driver's seat with rail for $1300 clean. The entire setup refers to both front seats with rails, door trims, gearshift boot, and rear seats. The entire setup refers to both front seats with rails, door trims, gearshift boot, and rear seats. Or you can buy just the front seats for $1300 if you want to install them alone, or for any other type of car. I have the driver's seat still installed in the car, so that if you're wanting to test the height that's fine. To save you the hassle, here are some measurements; The distance from where you sit (the pivot point between the seat of the chair, and the backrest), to the roof on a 180SX with sunroof is 94cm's (so that's 90.3cm's for non sunroof s13's). The distance for the S13 rails from the floor to the pivot point is around 14cm's. The distance from just the recaro side rail mount, to the S13 rail is 5cm's (this measurement is ideal for people who don't want to put this into an S13/14/15. I think R32/R33/R34 rails are only 1 bolt out but you can elongate that hole - But you should check that out yourself first. Please measure these distances on your own S13 seat before wasting both of our time first. PM me if you're interested as I may not check the thread - Don't reply to this thread if you are not wanting to buy them. Check my signature for my multiple good seller history These seats will not be placed on hold, whoever pays me in complete first will own them. NO TIMEWASTERS

ON HOLD PENDING PAYMENT. I'm selling a complete genuine leather trimmed (not vinyl!) interior from my Nissan 180SX as I'm wanting to turn the car into a track car only. Therefore these seats are not suitable for my application otherwise they wouldn't be for sale. These seats are located in Brisbane. These pics were taken when I had all of the seats in the car, just over a week ago, I have cleaned them since, and the mark on the rear drivers side seat does not exist anymore. The front seats are Recaro SR3 items from a JDM Honda Integra Type R and are on genuine Recaro rail mounts, mounted on S13/180SX factory rails. These seats do not allow you to move about, but are also very comfortable at the same time, even for bigger guys. The front seats are not some shitty retrim of the stock front seats that can be found for sale either. The rear seats are the standard 180SX items re-trimmed and include the full factory carpet attachment that covers the boot. I also have the gearlever leather surround and door trims. (the door inserts are not detachable from the door trim for those with S13/180sx) I don't want to stuff around with cheapass lowballers so the price is set low and is NOT negotiable. If these don't sell for this price, I'll be putting them into my S15. Sponsors sell these exact seats with tears and scuff marks, with these rails for $1650 pickup. I'm selling the whole leather setup including the front rails mounted, for $1500 pickup. Or you can buy the whole setup, but swap me your door trims (in perfect condition only) and non-type-x 180sx driver's seat for $1400 clean. Or you can buy the whole setup, but swap me your door trims (in perfect condition only) and 180SX Type-X driver's seat with rail for $1300 clean. Or you can buy just the front seats for $1300 if you want to install them alone, or for any other type of car. I have the driver's seat still installed in the car, so that if you're wanting to test the height that's fine. To save you the hassle, here are some measurements; The distance from where you sit (the pivot point between the seat of the chair, and the backrest), to the roof on a 180SX with sunroof is 94cm's (so that's 90.3cm's for non sunroof s13's). The distance for the S13 rails from the floor to the pivot point is around 14cm's. The distance from just the recaro side rail mount, to the S13 rail is 5cm's (this measurement is ideal for people who don't want to put this into an S13/14/15. I think R32/R33/R34 rails are only 1 bolt out but you can elongate that hole - But you should check that out yourself first. Please measure these distances on your own car before wasting both of our time first. PM me if you're interested as I may not check the thread - Don't reply to this thread if you are not wanting to buy them. Check my signature for my multiple good seller history These seats will not be placed on hold, whoever pays me in complete first will own them. NO TIMEWASTERS

Hi mate, I have a Bride MO Seat rail already. Will a Brix 2 or Ergo 2 fit this rail perfectly? or will only the Brix and Ergo 1 fit an MO rail?

When I rang Highway Nissan in Brisbane about these approx 3 months ago, it was $175 each vent.

SOLD Item: Genuine Tial 38mm External Wastegate (not an ebay copy) Age: It's only done 9000km's. Condition: Practically as new, Only removing due to changing from a T3 to a T4 based turbo, and my new manifold requires a different sized and flanged wastegate. Price: $300 or highest offer, not negotiable. Cost $550 brand new. +Australia post registered mail cost to your door if you are outside of Brisbane - Should only be $15 Check my signature for my successful trades history. Location: Brisbane Southside, or at the Gabba Send me a PM please if you're interested, cheers.

SOLD Item: Genuine Tial 38mm External Wastegate (not an ebay copy) Age: It's only done 9000km's. Condition: Practically as new, Only removing due to changing from a T3 to a T4 based turbo, and my new manifold requires a different sized and flanged wastegate. Price: $300 or highest offer, not negotiable. Cost $550 brand new. +Australia post registered mail cost to your door if you are outside of Brisbane - Should only be $15 Check my signature for my successful trades history. Location: Brisbane Southside, or at the Gabba Send me a PM please if you're interested, cheers.

Item now sold please delete

Item now sold please delete

Does the turbo fit if you fit it to the manifold first, then bolt the manifold on? That looks horribly close though.... I've got a genuine Apexi Top mount cast manifold on ebay at the moment ending this Saturday that may well be of interest to you!

Item now sold please delete

Item now sold please delete

Item: Brand new bonnet pins Location: Brisbane Southside Item Condition: New, unopened from package see picture. Reason for Selling: No longer required as I never bought a fiberglass bonnet. Price and Payment Conditions: $25 delivered australia wide or $20 pickup. Pictures:

Item: Brand new bonnet pins Location: Brisbane Southside Item Condition: New, unopened from package see picture. Reason for Selling: No longer required as I never bought a fiberglass bonnet. Price and Payment Conditions: $25 delivered australia wide or $20 pickup. Pictures:

Item now sold please delete

ITEM SOLD

3pm's and then this reply sorry. The item is on hold pending payment from the first person that pm'd me. Thanks all for the interest.

ITEM NOW SOLD. Item: For sale - Brand new APEXi General Purpose Stand. This is the stand that you get with a Rev/Speed Meter, AVC-R & S-AFC. Location: Brisbane Southside Item Condition: Brand New - never used. Price and Payment Conditions: $20 delivered Australia wide or $18 pickup. Pictures: .

ITEM NOW SOLD Item: For sale - Brand new APEXi General Purpose Stand. This is the stand that you get with a Rev/Speed Meter, AVC-R & S-AFC. Location: Brisbane Southside Item Condition: Brand New - never used. Price and Payment Conditions: $20 delivered Australia wide or $18 pickup. Pictures: .

Item now sold on ebay, cheers

Item now sold please delete

ITEM SOLD Item: Apexi Cast Iron, TOP mount exhaust manifold Condition: VGC Price: $800 + delivery by Australia post registered mail with insurance WORLDWIDE. I will ship to the USA UK Canada or anywhere in Australia with payment up front. To Fit: (What car) All RB20 RB25 RB26 Skylines - And it can fit in RB converted S13 S14 and S15's. Location: Brisbane

Item now sold on ebay, cheers Item: Apexi Cast Iron, TOP mount exhaust manifold Condition: VGC To Fit: (What car) All RB20 RB25 RB26 Skylines - And it can fit in RB converted S13 S14 and S15's. Location: Brisbane

They're Falken Ziex 225's Price reduction $250!!

price reduction $150. According to the guys on here, an auto ecu will work in a manaul, but it's more of a get by thing until you can sought out your ecu problem. otherwise it works as per normal on an auto.