macka

Whoa dejavous!

int21h, Strich9 is a ricer from way back just check the rope he wears around his neck

Nah i gotta better way to do it now 360 grit then 600 grit on an orbital sander Then on to the polishing wheel Thats for alluminium Use a hard cutting compound on stainless or u will be there for hours! I have found a way to polish headlights properly as well.Glass finish instead of hazy headlights.... Not 100% worked out yet but Ill let you know by next week and if anyone wants em done

i would definately check o2 as this is the feedback fuel mix loop under 2000rpm in conjunction with the afm Also if you are getting popping sounds from ur exhaust is it possible u have retarded timing therefore reducing the firing efficiency and using more fuel to cruise

Heres how i would go about it. 1 set boost to 11psi or lower if the problem exists at that boost 2 Have my new plugs gapped to .6 or so 3 Take kick panel off to expose the computer and check wiring for loose connections 4 Unclip Ignighter pack for a known good one and take the car for a run 5 Take 1 known good coil pack and give it a run each time swapping good coil pack to a different cylinder 6 Replace computer with known good one Ive done this from easiest to hardest labour wise.. Ecept the computer as it is rare for it to happen plus availability of a spare is sometimes difficult. Good luck mate

I Got an AUto"gay"clutch A twin is going in when Our sources find me one after i have afforded some panel work night

OK dudes my head hurts.... Night all!! See ya and definately whot=re ya tomorrow at some stage....

OD NEO

Adrian Please be Gentle....

Yes sir.... I beleive your equipping yourself as well?

Ill give u that But i got a better one... Later....

How would you know

Yeah thats ok... If hes focusing on Cam gears im not in a position to worry yet...... :bahaha:

RUSS TOMORROW Start at Nismos Then once where trashed and boysteruous we go to mickos

Ive bought stuff from Nengun before and havent had a problem Maybe Adrian Just got a NigGa Attitude he learnt from here

What U getting off Nengun?

Whad u say about my mumma?

PAUL Ill come with you to Rays

Kenny My car goes But no launch until a twin goes in

U never know if joe drinks straight bourbon he might be running around naked......hahah eeww

So now i gotta do a 12.7 Need a twinplate

I dont think your in a position to talk cadbury Kid

Cool non turbo edition! Shutup Paul

The drags u the sphincter of the universe R we going to Nizmos tomorrow

Lucky dem bushes are big "rustle Rustle" Ok enuff