WhitePrincess

got stock rear struts with lowered springs, not asking much, pm if interested

dude, got a set, depends how low you want them they are lower than stock but not as low as king super lows, can send a pic of a car with them on, not asking much

see attached image... should give u an idea... if not, take it to the shop to get it fitted

nah mate, i bought a new one from nissan and through out the one that came with the kit. the pic is just for comparison between two (one on top of another one).

also it's worth to mention that when i installed mine, i had to get a new plastic bit that goes on the bottom on the short shifter... the one i had supplied was a bit smaller and that would of made the gear stick feel loose. the new part was purchased from local nissan dealer and was around $10 mark... see attached pics for part number

dude, have a look at the picture included... in red are your plates which will go just about 1cm down from that shiny piece of gearbox you see on the pic. both of them should seat nicely in the groove... then, put your short shifter in and on top of that, the square piece will sit (in blue on the pic), align the plates and top square piece, put the bolts in and tight them up and you are done.

there should be two banana looking flat bits of metal with threaded holes that came with the short shifter kit. you need to put them in a groove on the actual gearbox and use the bolts to secure the shifter with square metal piece with 4 holes... not very technical i know, but unless u are missing some parts you should be able to fit it no problem. i did it on my r33 s2 gtst.

just thought i'd update my own topic so if people search they'd get the full story: installed the 'nipple' in my intercooler piping and it keeps doing the same thing... i think i'm gonna blame the boost controller for it... unless there is someone out there that can give me an answer to this small but important problem.

had an oxygen sensor on the dump pipe replaced in mine which added 50km per tank. the car was running rich all the time. when you look at it via Consult and rev it, it suppose to go 'rich, lean, rich, lean' apparently good luck

that's what i thought, correct me if i'm wrong, but i do have it connected to the intake plenum now, don't i?

i'll look for some more pics if you can't see what you need from this ones... it's been a while since i pulled that stock boost controller off and can't remember where it all went, but that's why there are pics..

cool, thanks for that guys!

dude, not sure if these will help you, but that's all i could find... if u still need help, im pretty sure i have some more old pics around...

on r33 it's 650rpms actually

Hey guys, I'm sure a lot of people have seen/heard of this before... Boost problems after a FMIC install... Of course that bloody thing doesn't have the nipple on the piping kit, so where do I connect the boost controller? I have attached the pic of my engine bay for your reference. What seems to happen is boost rising... It would stop at 8psi as I have set it to, but then in 2nd and 3rd under a fair demand (4000-6000rpm) the boost can raise by itself to like 12psi, and if not careful I guess can raise even more (wasn't gain to try). Can someone pls help me... Do I absolutely have to weld a nipple on the intercooler piping or can I just use some other hose??? As always, I DO thank you very much for any help you can give me

Hi Steve, Turbo back exhaust is 3" all the way into 3.5" rear cannon with ?" tip??? As per fitting, 100% fit? No modifications required to underbody? Thanks.

Thanks for that. Is there any difference in turbo back system from your website and the ones on ebay? it seems that they have the same price, but the delivery charges are $35 on ebay and $80 via justjap.com website... Wouldn't you prefer to have all customers going thru' your website so you don't have to pay ebay charges? Just didn't make sense to me.

hey dude, what exhaust did u end up getting? im looking at those on justjap also, in decision....

hi there, do you have any more photos of r33 with exhaust installed? a video would even be better! thanks in advance.