yo_stock

The power steering issue is from the actual pump itself. Idealy you want to underdrive the pulley. The pump actually starts to re-circulate oil back to the resovoir after roughly 750rpm. Due to your engine now roughly running on average around 6-7-8000 rpm the amount of fluid that is returning to the overflow is high, causing alot of friction through the pump, thus causing it to over heat. A cooler will help the solution, but under driving the pulley is a must. also, incase it sounds weird, the pump is at 100% duty cycle at 750rpm to make it easy to idle into a car park. research the V8 brute utes, they where exploding pumps from excess heat due to their average RPM. I have underdriven the one on my car, added a cooler and I dont have this issue any more.

Car has got internally standard s13 SR20DET stock turbo and manifold Turbo back 3" exhaust Locked diff 18x10,18x9 rota grids BC racing coil overs Brand new rubber all round Bride replica seats 4pt harness's S15 dash Blue led cluster Stripped interior Sound deadening has been fully removed and inside painted green I have for this car but not fitted is Z32 AFM, NIStune ecu, S15 inj, S15 turbo (needs rear housing as it is cracked) Then this car will be pumping out a mad drift setup 200rwkw. all you need for bulk amounts of fun!! Car is located in Newcastle NSW you can call or message me on 0478 690 223 $5500 ono Cheers David.

SOLD

SOLD

Pics Sent, Any one else after pics, please PM me. Thanks.

Please PM me for pics.

Hey guys, I have a complete R33 GTST the gearbox IS MISSING. The shell has some rust around the strut towers so I don't think it can be registered. The car is located in Newcastle NSW It is best suited to some one who wants a half cut. Everything is in the car minus the gearbox. Car still has, clutch, clutch lines, clutch pedal, pedal box etc etc. All inquiries please PM me and I can forward you more details. Car comes on stock wheels also.

Hey guys, I have a complete R33 GTST the gearbox IS MISSING. The shell has some rust around the strut towers so I don't think it can be registered. The car is located in Newcastle NSW It is best suited to some one who wants a half cut. Everything is in the car minus the gearbox. Car still has, clutch, clutch lines, clutch pedal, pedal box etc etc. All inquiries please PM me and I can forward you more details. Car comes on stock wheels also.

Chasing some GTR stuff Diff, axles and up rights. Would really like them to come with bolts etc... I am in Newcastle, closer to here the better, Thanks.

How do I delete this? Car is sold.

Very tidy, very fast, remapped ecu, very well maintained R32. GTR spoiler enkei wheels Stainless Steel / Ceramic Coated turbo back exhaust Split dump pipe High flow cat. New o2 sensor Front mount intercooler Cold air intake Z32 AFM Remapped ECU Split fire coil packs walbro fuel pump boost tee running 15psi New water pump New clutch slave and master NISMO clutch pedal braided clutch lines with removed damper excedy heavy duty clutch BC BR series coil overs new adjustable caster arms HICAS lock bar NISMO extended wheel nuts open lock nuts Enkei 17x8 and 17x9 rims good tires 8000k HIDS hi and low beam LED dash lights LED plate lights GTR wing MOMO steerin wheel Greddy gear knob Kenwood CD player New speakers front and rear Car goes very well, has been remapped with Z32 and running 15psi Engine and gearbox in great condition, this car is really worth the look it is in very good condition for its age. Car is located in Newcatle NSW, I can get more pictures or details if you require them. Please call me on 0429 824 661 to discuss further $8500, 12 months rego.

Hey guys, chasing an r32 gtst diff, let me know what you have. Would like pick up Newcastle or Sydney.

I am chasing a diff out of a Skyline GTS 4 ratio has to be around 4.375. Post up what you have..

Hi guys I am after some R32 parts around the Sydney / Newcastle area I am after type m side skirts Type m rear pods Also after air con vents (all of them) Also other parts I might be chasing is front and rear seats Thanks in advance.

Price negotiable

S13 SR20 Greddyncopy manifold great copy too $150 S13 SR20de throttle body $50 Drift 3" pod filter, brand new $30 delivered 600x300x76 black inter cooler $50 S13 SR20 stainless intake pipe $50 delivered S13 CA instrument cluster 97xxx kms $60 S13 CA18DET airbox good condition $50 S13 SR20DE airbox good condition $50 180sx sunroof glass and brackets $150 S13 silva sunroof full electric all working fine $150 S13 3" dump pipe $50

sold

I have a Tomie FPR here, its a type S never used sitting in my shed I wanna get rid of. $100 delivered, I have some pics on my old phone I can dig out if needed, but its the same as this one http://www.prospeedracing.com.au/products/Tomei-Fuel-Regulator-Type-S.html

This car has been my daily for a while now, never been pulled over or defected. It is a genuine manual SR20DET no dodgy conversions done, factory manual, factory sunroof. Car has a new engine about 8000kms ago cp pistons balanced crank, reconditioned head few other goodies in their. It also has a GENUINE AERO kit, these are worth heaps on their own, the front bar has a crack on the top left. a quick list of parts Greedy gauges oil temp, oil pressure, water temp and boost gauge Japanese coil overs Z32 front brake conversion with DBA slotted rotors HID kit, with LED parkers and corner lights Full GREEDY front mount intercooler kit Full 3" turbo back exhaust - has a nice note 18" wheels wrapped in good condition Bridgestone Potenza tyres Battery has been relocated to the boot Extreme 6 puck sprung button clutch installed with new engine and gearbox, very easy to drive, not heavy or "jerky" It is fitted with a GT2560 turbo, or T28 as most people call them The car is only running standard boost, off the actuator and goes really good, it has never let me d own the hole time I have had it. $8500.. Located Newcastle NSW. Contact me (David) via PM for more contact details.

Thanks mate, already got the VIO3 I for some reason was thinking you wrote Gias lol

Hi , I'm interested in the 1 pair of Vios III in black FRP with graduation materail Are these the reclinable style? If they are pm me some details and I'll pick em up with my others Cheers David.

Hey guys, I am rebuilding my RB25 gearbox and I need a new input shaft, I have bought all the other componants new from Nissan but they do not stock these parts any more... So if you have one let me know. cheers

1. Vios III Fixed back 2. Glitter $550pr 3. black graduation 4. Most likelly pick up, but I will organise frieght if pick up fails.. Paypal can go through today..

I'm rebuilding a box and need an input shaft for it, the 4th on the shaft is wrecked... Will buy from anywhere

I have been looking every where for a speedo sensor or speed drive... I need the one that bolts into the box, does any one know where I can find one???? I have a wtb add too, just know one has replied