Torques

Thanks ... makes perfectly sense. I hope it's not going to be too twitchy / harsh but the bar is adjustable so I will start with the softest setting.

Whiteline Swaybar Links vs WL Pin Eye Link? I got two options mounting my rear sway-bar links. One is the Pin/Eye type (comes with the sway bar), the other option are the links shown in the picture (right). The links on the right side have no bushings at all, how does that affect the operation of the sway bar? Cheers!

M16 X 1.5

For some reason I can not edit my post, I think the sensor is actually a switch

R33 GTST Coolant Sensor Thread Size? Would anyone know what the thread size of the coolant sensor is? (the one sitting at the radiator)

I'm not going to do this myself, but I would need the service data for the aircon professional. I can answer my own question:

Would anybody have the data for the amount of compressor oil and refrigerant that are in the AC system? I will have to replace the condenser unit since it's leaking. If all fails I would use this Z32 data: https://z32.wikispaces.com/Air+Conditioning+System#Compressor%20Oil%20Levels

Hello, I had a smaller crash with my car. The slam panel (headlight area) and the bar where the bonnet latch is attached to are slightly bend. What would be my options to have that fixed? Would a good body shop be able to bend this back into shape?

Thanks all, I dropped them an EMail asking for a dyno etc. No response yet ..

Hi, It that confirmed? I could not find it on their website ..

OK, thanks .... seems there is no dyno available. From the design of the plenum it looks like the manifold might introduce some sort of lag since the bulbous design. Not sure if it's worth the trouble of installation then.

As per title, has anybody a dyno comparison between OEM and Plazmaman Manifold? Thanks ..

Usually 'Has To Be Installed By A Professional' means it requires a lot of work to be mounted.

Nothing wrong with OEM, but the GTR bumper looks a bit more muscular ... and this might be the chance to get that bumper.

Thanks ...

I was involved in a car collision which was not my fault and will need a new bonnet and bumper. (Unless it's a write-off) Apart from the Nissan OEM parts, what other bonnet/bumper options are still available? Would the S2 GTR bumper fit?

Is it the OP6 housing?

OK .. got the results from search .. muts have been asleep http://www.sau.com.au/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/page-52?hl=%2Bmamba#entry7550762

More lag compared to non ball bearing .. interesting, thanks! Besides I find the name MAMBA not really great

Of course , I searched for MAMBA .. but didn't find any results.

Has anyone heard or experience with these units? Here they offer an GTX3076R with A/R .73 style BB turbo http://www.ebay.co.uk/itm/MAMBA-GTX-Ball-Bearing-Turbocharger-GTX3076R-Nissan-Skylin-GTR-RB20DET-RB25DET-/191715991911

Thanks for that, If only they were less $$$ How did the rear sway bar work out for you? Was it a good upgrade?

Yes, sorry I didn't made my question clear enough. I was concerned about the length adjustment of the end-links.

OK, thanks .. Would anyone know how much 'preload' there is on these bars? I mean how much do I have to adjust the length of the connecting links? (with the car on the ground)