-
Posts
873 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by Torques
-
-
They look a bit skimpy at the connecting link (the straight part) but maybe I'm wrong.
About AUD 150 in the UK and that is after a 10% discount
-
I think you're mistaking the pictures of the basic Whiteline ones that come with the bars and the uprated Whiteline ones that cost some coin.
Hmmm .. aren't these the ones?
-
fair enough...but the Hardrace ones are half the price of the whiteline ones, what's your definition of expensive?
Yes, you're right .. the Whitlines are very pricey and don''t look that convincing.
I also found these:
But am unsure what dimensions (length) I need
-
Thanks for the replies ..
I don't really like the hook and loop style ones and think the ball links are mechanically wise much nicer.
(very expensive though)
-
Hi,
Just wondering if these endlinks are worth their money as opposed to the supplied somewhat crude looking endlinks?
(It's for an adjustable rear end swaybar on an R33 GTST)
http://www.whiteline.com.au/product_detail4.php?part_number=KLC109&sq=12993
Cheers
Supplied endlinks
-
-
Air temperature / velocity / pressure are all linked together in neat proportional formulas.
Just by looking at pressure drop without having the density (temperature) wont get you very far.
That's why MAP sensors always need the air temperature to calculate actual air mass.
I'm not saying the Blitz Return Flow Cooler is ideal, but it looks pretty well engineered,
-
Based on the cooler behavior from earlier test runs. I've made another special application turbo: ATR45-SRFC
This one is made for the minimum amount of boost drop, making some some where towards the 300rwkws mark on pump fuel. It is a bolton turbo just like the ATR43SS/G series. So this will be your recommended turbo if you you've got this type of intercooler installed chasing similar power levels.
Final result of 292rwkws @ 19psi after cooler. Internally gated, P98 fuel.
When making pressure measurements you have to take the air temperature into consideration.
The air before the FMIC is much warmer and hence less dense which attributes to higher volume / pressure.
After the FMIC it's the inverse of the of what I just wrote.
-
It would be interesting to see a comparison between different FMIC to have a baseline
But why would you say with an electronic boost controller attached the drop would be worse?
Doesn't an EBC usually sample the manifold pressure and modulates the actuator/wastegate in order to maintain it's target boost?
That would compensate for boost drop down the line, not exacerbate it.
-
Thanks,
I would gladly use anther housing but it has to fit the standard manifold / dump mounts
Any hints where I could find a replacement?
-
-
Why would you bother cracking out the spanners to put a turbo that performs like that and is ready to grenade itself?
It takes the same amount of time to put a decent turbo on.
You are absolutely right. it would make not make much sense.
I'm going to install in a new hybrid turbo I got for testing purposes.
The hybrid comes with the smaller R33 turbine and I want to swap this turbine with the OP6 (R34 GTT) one.
Stao (thanks!) already said the OP6 makes 20-30KW more power.
I was just concerned about lag hence-why I asked for a dyno plot.
The OP6 is said to have an A/R of .63 vs .50 for the R33
OP6
R33
Difference in turbine housing
- 1
-
I have a neo turbo on my R33 on standard boost. It is a straight swap with no modifications. Standard ECU handles it fine
Sorry to revive this but just interested to hear if there was any added lag or improvement switching to the NEO (OP6) turbine over the R33 turbo
Thanks ..
-
Does anybody have a dyno of the GTT with OP6 turbo?
(boost curve)
I would like to see if that OP6 turbine introduces more lag compared to the R33 turbine.
-
Take it from a professional aerodynamicist (of sorts)......A 90° bend at the turbo outlet will cost you absolutely bugger all compared to any other option you could come up with.
Yes, the bend is still in the cards ... best practices solution
-
Agree a 100%, looks cheap.. also I'm not a huge fan of stubby silicone bits ..
The welding option sounds like a good idea.
Yeah 90 degree silicone hose looks ugly and cheap too but it does work so long as you can keep it away from the exhaust manifold; or you will be replacing it often.
Another option is to pull the compressor cover off and take it to a fabricator to weld a 90 degree bend on the outlet -
Charge tubing design affects the overall performance, so there are a few points to keep in
mind to get the best performance from your system.
Duct bend radius:
Radius/diameter > 1.5
Avoid area changes, sharp transitions, shape changesI could possibly find some smoothly bend alloy tubes ( or even silicone ones)
The compressor outlet? Has a 90 degree hardpipe bolted to it on the stock turbo, dont understand what the problem with airflow with a silicon 90 degree bend would cause?
-
Thanks,
Didn't know you could buy these brackets off a store.
As for the different terminals I was initially thinking of manufacturing new cables
But if there is an adapter available that would save time and $$.
-
Thanks,
I thought about this .. though 90 degrees sounds detrimental to airflow..
-
-
I'm thinking about getting a larger battery and singled out one which is about the same hight but somewhat deeper in dimension.
This would also perfectly line up with the 2nd mount hole for the battery holding hook.
The only problem is that the battery bracket (sitting on top) would be too short.
Is there any Nissan I could possibly source a longer bracket from?
Thanks
-
-
Thanks,
Do you have a link for that 330mm kit?
Unique Auto Sports replied and the price is too steep for 2 brackets (AUD 380)
(I get 2 good new rotors for that)
Also I would need different pads because of 'overhang'
These guys replied:
http://db-power.co.uk/products-page/front-big-brake-kits/345mm-big-brake-kit/
And said the kit might fit under the GTR rims .. I will need to take some measures I guess.
-
OK,
Thanks again ... that kinda limits the options.
i checked on the price for used GTT calipers and they're too expensive to justify going the 310mm route.
So what's left is
Unique Auto Sports
http://www.uniqueautosports.com.au/Parts-Shop/stage-1-brake-upgrade-kit-642.aspx
or just getting the standard rotors ...
Whiteline Klc109 Rear Sway Bar Endlink?
in Suspension, braking and tyres
Posted
I mean for the price it should be top notch quality really ... it's a lot of money, almost what I paid for the sway bar itself