GT-5732

I swapped the parts with my Stag and there are no faults on my car. im guessing a dodgy connection too. Thanks for the help, i just want to get this thing started! lol

yeah just checked it... all dry, just dusty. cheers Anyone else got any ideas?

well, i have tried swapping out both CAS and Sensors on the back of the heads and still nothing. i cleared the codes and it hasn't came back but im thinking it my not till the engine is running again. i have got another error that came back up and it P0121 and i have swapped out throttle body's and accelerator pedals and still no go with P0121 comming up again once cleared.... There has to be a short somewhere in the system, but i wouldnt have a clue where to start with the short!?!?! Any idea guys? or would i be better to get a auto elect. to have a look?

Thanks Scott, ill give it all a go. Cheers

yeah, i will do that, cheers but would that sort of thing stop the car from starting or running? as i cant get the car to start, it sometimes tries to start but straight away stalls.

Hi Guys, I have a NM35 Stagea and it wont start. i have Fault Code P1135 come up and googled and came up with this: http://engine-codes.com/p1135_nissan.html Possible causes - Faulty Intake Valve Timing Control Solenoid Bank 2 - Intake Valve Timing Control Solenoid Bank 2 harness is open or shorted - Intake Valve Timing Control Solenoid Bank 2 circuit poor electrical connection - Faulty Crankshaft Position Sensor (POS) - Faulty Camshaft Position Sensor What does this mean? Tech notes Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code. What does this mean? When is the code detected? When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the Engine Control Module (ECM) will trigger the P1135 code. Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) - Possible engine lack/loss of power - Posssible engine rough idle Read more: http://engine-codes.com/p1135_nissan.html#ixzz38AhpLpuN If anyone can give a bit more of an idea of what and where would be great. Thanks in advance

Lets give the olde weekend BUMP!

Bump

Bump

I have a C34 Cargo blind in good condition $100 Pick up only Canberra or i can deliever in the Canberra Area

I have a used clutch and solid flywheel from a Holden VU Ute The clutch was removed to due to upgrade and has done about 30,000km I have had the flywheel machined and is perfect. The clutch plate is still in good condition. Looking for $450ono Delivered or cheaper for pick up (Canberra pick up or i can deliever anywhere in the ACT)

Bump

Im heading out

White R33 on Hegney Cres Chisholm this morning at 6.45am White R34 on parkway heading south near Zoo