sven

rear diff now sold..

miss print on the passengers seat sorry, its gtst seat not a gtr seat.

sorry miss print on the passengers seat it a gtst seat not a gtr.

my car as per pictures... non sunroof s13 silvia or 180sx.

Ok so have had enough of my car lately its been ff the road since february last year and have decided to sell off most of my parts and buy something that is a tad less modified and pref going, few reasons behind this but ne was, have a complete car that can either sell rolling or not otherwise will strip and sell off in parts. Parts as follows suspension and braking parts 7 point cusco safety 21 roll cage complete with padding, plates and all bolts to fit, non sunroon modle $850 Rear ARC 30mm adjustable sway bar $250 R33 gtst hand brake cables $100 G4 racing coil overs $800 R32 gtr tail shaft 2 piece $100 JIC rear strut brace $150 S14 front lower control arms $200 pair S14 front hubs and spindles $350 pair R32 gtr front rotors and calipers + brake lines and bolts and pads $600 freshly rebuilt can supply receites R32 gtr rear brake rotors and calipers + bolts and pad $250 R32 gtr rear braided brake lines $50 R32 gtr complete rear diff in housing $400 R32 gtr rear drive shafts and hubs $300 (or will sell complete rear cradle for $1000) Interior Parts Schroth 4 point harness $100 r32 gtr passengers seat $100 bride copy fixed back drivers seat on genuine bride rail $250 momo sports steering wheel with silvia boss kit $150 autometre monsta tacho $250 stock s13 silvia dash with cluster and 4 gauges above glove box, oil temp, oil pressure, volts, water temp, $250 Exterior Parts Turbo back 3" exhaust, 3" dump, front race cat and cat back to suit ca18 $450 onevia conversion 180sx bonnet stock with sparco bonnet pins 180sx front guards 180sx stock sr20 front bar 180sx gp sports front bar 180sx head light covers + vented passengers side 180sx headlight motors Sell the lot for $600 Engine Parts Complete ca18det forged engine with all receites Os Giken twin plate clutch ca18det 5 speed manual gearbox Dr Drift remapped computer and stock wiring loom Greddy oil coller kit with remount mount 600x300x100 FMIC with custom piping and turbo smart vee port Garrett Gt3071r turbo kit on ss low mount manifold and 38mm external Waste gate Bosch external coils with loom Custom plenum creations custom plenum with 75mm throttle body more info can be found on the motorand build on the below link. Selling complete motor and gearbox as a package for $6000 firm WILL NOT SEPERATE, if dont sell will keep http://www.nissansilvia.com/forums/index.p...howtopic=272094 and once thats all gone will have the shell left over can be regestered still as it just about out of its 3 month period, can supply import approval paper work as well. As for pictures off all parts they can either be found at the link below otherwise msg me and ill arrange individual pictures of each item. http://www.nissansilvia.com/forums/index.p...howtopic=272094 All contact via pm please. And as for prices they are all semi negotiable so pm me with your best offer if you dont like my price and ill see what i can do, will discount if you buy alot of gear at once. All parts located in Hobart Tasmania and will post at buyers expense. cheers Stephen

Ok so have had enough of my car lately its been ff the road since february last year and have decided to sell off most of my parts and buy something that is a tad less modified and pref going, few reasons behind this but ne was, have a complete car that can either sell rolling or not otherwise will strip and sell off in parts. Parts as follows suspension and braking parts 7 point cusco safety 21 roll cage complete with padding, plates and all bolts to fit, non sunroon modle $850 Rear ARC 30mm adjustable sway bar $250 R33 gtst hand brake cables $100 G4 racing coil overs $800 R32 gtr tail shaft 2 piece $100 JIC rear strut brace $150 S14 front lower control arms $200 pair S14 front hubs and spindles $350 pair R32 gtr front rotors and calipers + brake lines and bolts and pads $600 freshly rebuilt can supply receites R32 gtr rear brake rotors and calipers + bolts and pad $250 R32 gtr rear braided brake lines $50 R32 gtr complete rear diff in housing $400 R32 gtr rear drive shafts and hubs $300 (or will sell complete rear cradle for $1000) Interior Parts Schroth 4 point harness $100 r32 gtr passengers seat $100 bride copy fixed back drivers seat on genuine bride rail $250 momo sports steering wheel with silvia boss kit $150 autometre monsta tacho $250 stock s13 silvia dash with cluster and 4 gauges above glove box, oil temp, oil pressure, volts, water temp, $250 Exterior Parts Turbo back 3" exhaust, 3" dump, front race cat and cat back to suit ca18 $450 onevia conversion 180sx bonnet stock with sparco bonnet pins 180sx front guards 180sx stock sr20 front bar 180sx gp sports front bar 180sx head light covers + vented passengers side 180sx headlight motors Sell the lot for $600 Engine Parts Complete ca18det forged engine with all receites Os Giken twin plate clutch ca18det 5 speed manual gearbox Dr Drift remapped computer and stock wiring loom Greddy oil coller kit with remount mount 600x300x100 FMIC with custom piping and turbo smart vee port Garrett Gt3071r turbo kit on ss low mount manifold and 38mm external Waste gate Bosch external coils with loom Custom plenum creations custom plenum with 75mm throttle body more info can be found on the motorand build on the below link. Selling complete motor and gearbox as a package for $6000 firm WILL NOT SEPERATE, if dont sell will keep http://www.nissansilvia.com/forums/index.p...howtopic=272094 and once thats all gone will have the shell left over can be regestered still as it just about out of its 3 month period, can supply import approval paper work as well. As for pictures off all parts they can either be found at the link below otherwise msg me and ill arrange individual pictures of each item. http://www.nissansilvia.com/forums/index.p...howtopic=272094 All contact via pm please. And as for prices they are all semi negotiable so pm me with your best offer if you dont like my price and ill see what i can do, will discount if you buy alot of gear at once. All parts located in Hobart Tasmania and will post at buyers expense. cheers Stephen

sold

need these gone asap, take them away for $450.

need these gone yesterday.. price drop $600

have finally located!

have finally located!

cant seem to post pics atm so heres some link to other pics until i can sort something out. http://www.nissansilvia.com/forums/index.p...p;#entry4225190 http://www.nissansilvia.com/forums/index.p...howtopic=308346

as above have the rims on my car up for sale there 18x8 with either 30 or 35 offset, will confirm tomorrow, they come with potenza 235x40x18 tyres with around 50% tread there 5x114.3 stud pattern so will sit ne 5stud silvia or skyline or maybe even a few hilux utes. selling as ive found another set of rims that im interested in. asking $700ono also have my schroth harness up for sale as i`ve found a new set that i`m interested in. asking $150ono pics to come soon.

still looking!

still looking!

still looking!

were r the fronts? what did the car come with?

<br /><br /><br />i had my made by Ariel at custom plenum creations.

bash the gut out of the standard 1, do just as good job.

or ne thing else with the same spline, ca18 or 20 or maybe a rb30 box. cheers

or ne thing else with the same spline, ca18 or 20 or maybe a rb30 box. cheers

ne one out there killed a rb20 gearbox recently? if so is ne one willing to chop off the imput shaft and sell me? needed urgently? Will pay postage. cheers Stephen Hit me up via pm please guys.....

ne one out there killed a rb20 gearbox recently? if so is ne one willing to chop off the imput shaft and sell me? needed urgently? Will pay postage. cheers Stephen Hit me up via pm please guys.....

check the tassie section champ.

started looking 4 a turbo yet vagi? or still trying to make the decision first, theres a 3540 on ns.com going cheap or was the other week otherwise theres a few others if your looking into others not mentioned here.