Alfred Y

Hi every one, recently I had purchased a AEM air/ fuel gauge, it comes with all the sensor and wire, but my mechanic said my front pipe doesn't have two holes to fit the O2 sensors. the alternative way is to drill another hole on the front pipe which he is not recommend me to do it. So is there any way to fit the gauge without cutting or drilling? My car is the 98 ER34 GTT thank you.

Totally agree, I used to run with a brand called 'Double Star" ( some china brand) the size is 225/17/45, my car had serious under steer in dry condition, and like a floating boat in the wet, it can be easy to slide out just using 1/3 throttle. It is always YOU PAY WHAT YOU GET, no matter how many horse power you've got, at last it is those four wheels to run the power, don't save for a hundred and lost a few thousand.

Mechanic tightened up all 4 and flush 4 brake again everything sweet now, thanks everyone!!

Hi Everyone!! My car is a 98 ER34 GTT I had recently upgraded my stock brake line to NISMO brake hose, and using Endless brake fluids. I find out after driving there is oil leak from the bottom of the car, does it happened into any members car in here?? Need Some Help ASAP.

Should post it at want to buy section!!!

How much for the set of tail light??

Because I have my major service coming up so I want to do some little mod to the car at the same time. My aim is to make the 34 be more responsive and carry out the full potential of the Neo engine. My other part are full 3 inch turbo back exhaust, intercooler, evc and planning to run 14psi at all time. And I saw this cams from the Tomei web site, it claim that it will increase the low and mid range torque with stock ecu and stock turbo. Therefore I just want to know if this will fit my plan and what other little pieces I have to aware for? Thank you

Saw it once at south bank, clean example!! Free bump!!

I am going to purchase the Type A Duration Intake: 252 Duration Exhaust: 252 Lift Intake: 9.15mm Lift Exhaust: 9.15mm. I might try the stock cam gear first. Thank you everyone!

Hi everyone, I don't know if I ask this question in the right place? I am prepare to purchase a set of Tomei Poncam for my 98 GTT, just want to ask if I replace the stock cams, do I need to change the cam gears as well? Or I can run with stock cam gear? Thank you everyone.

I got one of this in my car. The travel distance is pretty much the same with the stock one about 10% shorter. But it give you a really good solid gear shifting which most of the short shifter couldn't provide.

will you do 120 post to QLD 4109?

will you do 120 post to QLD 4109?

Will those fit in an ER34 GTT??

That offset looks all right in the 34.!! Free bump!

Got my coil pack yesterday!! Thank you !!

Tow hook still up for grab!!!

Bilstein shocks is now sold!!! Tow hook is still for sale!! Will sell it for $30!! This is brand new item.

That's not for ER34 right? still looking for a pair of seat rails.

pending payment!

It will only fit into R33 GTR, R34 GTR and ER34 GTT

Bump! anyone want the quality shocks from japan? Send me some offer please, want these gone!!

It will lower the car about 30mm!!

BUMP!! $320 need those gone!!

HI Everyone, I have a set of ER34 GTT Jap spec Bilstein shocks for sale, selling it due to the upgraded to the coilovers. The shocks have fitted with a set of Kings springs at 48000k and the shocks were took out from the car at 53000k. So the shocks done around 53000k for its life and the springs were done around 5000k. All the work were done by Centrax the Endless Official Distributor in Australia, and they also did the inspection after the shocks were out. There is no leak and in 100% working condition for all four of shocks. I am selling these for $380, price are neg, interstate buyer are welcome but please organize the courier because they are heavy and I work from morning till late. Inspection can be arrange if you are living in Brisbane. Also have a brand new front tow hook. This hook is new never been use, was plan to use it in my car but it is too short to fit, it was sitting behind my front bar. Selling it for $40 and will post with buyer expanse Any interest please send me an SMS to 0414963354 or send me a PM thank you!!