ShyBoi

Lookin good cara, will post my pics hopefully end of this week if my cars ready and out of the shop

Agreed fibreglass and gutters, parking is a pain in the ass for repairs, but you will need to get gtr guards otherwise its like an inch wider. Other problem is alot of insure places wont insure f/g guards...thats your next problem

Found the details mate "We are unable to make carbon fibre bonnets only fibreglass we can make the bonnet you showed on the picture but it will be a custom one which means a little extra in the price it would be $990 to make in fibreglass maybe you can get someone to carbon fibre overlay it ? Our bonnets weigh less than a standard metal bonnet they weigh about 12-13 kg your metal bonnet weighs around 18-20 so a slight weight reduction . They take around 4-5 working days to make up plus the customising of the vents and a deposit is required of $100 on ordering of the bonnet I also need the vin number and rego of the car the bonnet is going on for the registering of the bonnet to the vehicle for street legal certification" Email: [email protected] I spoke to Wendy, so just shoot through an email to the above address with a photo of the bonnet and let her know what type of car its for and she'll let you know if they have them or would need to do a custom job like what I was after. Cheers mate, good luck with it

On that note I'm gettin a pair of Bride Low Max Gias which are reclinable, can you have those with back seats or still hav to tell vicroads and have mod plates?

psi parts doesnt hav the bonnets in stock atm, and last order for the year has gone through so dont think they'll hav any until new year

There are a few places in new south wales i've spoken to have the z-tune bonnet in fibreglass and they give u an ADR certified certificate to avoid cop harassment think it was $800 tho...will hav to try and dig up the name of the place

Kevin - As do I but for future reference and these guys I'll check it out

Kevin - I'll check with my mate cause he was going to get me one has good contacts for this, wouldnt tell me who either...but should be able to without importing it.

pretty sure u can in melb, will ask my sources mate...give me a couple of days

Hey guys I'm soon to get off my P's in July next year, and have had all the bodywork on my car done, was looking at dropping a RB26DETT to finish off the show engine bay for the car for autosalon. Currently I've got: 1995 Nissan Skyline R33 GTS-4, so already has awd setup Just wondering if I dropped the RB26 into it, would the standard diffs be alright for just general street use or would I need to get GTR diffs to hold it. Cheers in advance guys, any advice is good

I can definately say the c/f is top quality, have had my bonnet, duckwing and diffuser all from them, PM-R33 also has gear from there so will be able to agree as will anyone else who has purchased from PSI Parts. I dont personally know F1s gear so wouldnt be able to compare it. I can get you photos of the weave on my gear if you want to check it out

Cant wait for this, hopefully will be bringing the JDR33M car which comes out next week, the JDMCOP r34, possibly for the roadtrip will have sojucy 180 and the tekken rx7 along for the ride as well... Most likely Melb Autosalon will be in October prior to final battle in sydney which is like first week of november...so if this is september probably best time, but still possible showers

Only door inserts atm, I know the c/f doors can be purchased in Aus, but not the door cards though. The GTR wont be on these doors, its just an example as Knight Racer in UK do have it on theirs.

Cars currently in highfill atm possibly gettng the paint sprayed over the weekend or monday Will be heading down to the shop this arvo to check out progress, don't worry once I know I'll post pics for you Still waiting on the wheels from NSW, and some other accessories

It's only going to be for 33's atm, depending on the success of this they may start to provide for 32's and 34's, unsure As I know alot of people are after them, cause generally they are only made for silvias and 180s at most places from what I know so far.

Anything PSI produce are for both GTS/T and GTRs, cause their actual display cars a GTR will definately fit yours mate.

Hey guys, Now I've heard previously there was a fair bit of interest in people getting c/f door cards when I last posted about them. Have spoken to Shane at PSI Parts and he would be able to get these made, we'd just need to get 10 people down to get these to make it feasible. Price would be $600 for the pair, don't try and tell me thats not a bargain as F1 in the UK are selling them for 700 pounds. Please post your interest below Cheers Accessories are not included on the door cards Not sure if we could get the GTS/T/R written on like this will have to confirm Fitted:

GTRs are wider bodies it wont fit on properly, as i posted on another thread. I was supplied with a gtr front bar and it was over an inch wider than a gtst, but by making two slits in the corners i was able to reduce it to fit my guards after re-shaping and fibreglassing it. Not sure how easy it would be to make it wider though.

Nice james im liking these...post a pic when re-fitted Once my cars out of the shop next thing to be done is rotors and calipers

As Rhys stated GTRs are wider than GTS/T. Jetspeed provided me with a GTR front bar about an inch to wide, had to make two slight cut either side to bend it in but it did fit beautifully after. But I'd say stick with your standard 32gtr bar instead of veilside mate, but thats just my personal opinion.

Brett is right its a nismo style lip Have only seen one of these before however, but my guess is these were designed prior to the duck wing which followed the width and holes of the old spoilers. Might have to do some google research to find these...any part numbers on it at all?

Was looking at doing a 33.4 conversion on my car parts needed: Bonnet Guards $600 Front Bar Headlights $1000 (unless you find them on eBay or junkyards) Radiator Support Bonnet Hinges Bonnet Latch I'm sure there is something I've missed in that list it looks to short, people feel free to add to it In total your looking around the $5k mark for this depending on your sources