JDM_Spirit

Just a suggestion, If we prefer to meet prior to the Spit, we could meet in that car park out the front of Australia Fair facing the Broad Water? Its close and got a fair amount of room.

I upgraded my rear sway bar with a White Line item... had that flimsy 19mm hollow thing now to a 24mm solid. WORLD of difference. Handles like a Sedan One thing I did note when ordering, ALL GTR bars are the same. If you check BOTH Selby and White Line sites ALL the GTRs have the same part numbers/options. I also cross referenced the Stagea listing on the Selby site, same numbers! For what ever reason why some one would, you could bolt up a solid 27mm item. As the Skylines also share the same design as their GTS / GTT counter parts.

Gah... My heads spinning around now. I dug around the garage and found a mild steel Bell Mouth Dump Pipe.. Must be a left over? I rung the shop who did my cat back system (far from HKS ingineering but does the job quite fine ) asked them IF I bolt this Dump up and drove it down to the shop with just the Cat + cat back on the car (so no front pipe) they could make a front pipe to suit for under $100. So considering front pipes start at $80 and sky rocket in price from there, I figured not a bad deal, plus no chance of her rubbing. Ps: Yes, I'll secure the system good and tight to prevent it falling/swinging and I'll have to do an early morning dash, as to avoid police and old people, considering it'll be a wee bit noisey

I work graveyard on Saturday... depends on time. Will try though!

Ok, just got off the phone to JustJap. The explained that the Dump pipe for the R34 GTT is longer, as the CAT is located further back then a R32/R33/Stagea. So he said the Bell Mouth to suit R32/R33 in mild steal is the best option, and yes, it may/will require mod'n slightly as it will rub. Thus the choice of mild steal, easy to work with, even just to heat it up and smack it a little. Also, for a bit over $200 I cant really complain. + slight mod.

Hey, If you have an aftermarket Dump + Front pipe Im interested

Yeah, I seen these and they're 99% the same as what GK Tech is offering. http://www.gktech.com.au/front.asp?pid=11&...tID=R323%2DFRDU http://www.gktech.com.au/front.asp?pid=11&...tID=RBXX%2DDUMP But as dirtyRS4 stated he had problems with his. That why I was leaning towards GK Tech as their's has a 'Flex piece' in the Front pipe to allow for abit of loving. Im going to ring both GK T. and C.E.S tomorrow to have a chat about options.

Yeah My o2 Sensor isn't the happiest camper right now so I also plan on using new gaskets + sensor etc. DSTROY; Thats interesting you could bolt a RB20 dump on. There's a bit of conflicting information I keep coming across. As I was going to get the GK Tech Dump + Front, they list it to suit R32/R33 RB20/RB25. I'll ring them as soon as I can find a free minute. But when I check the listing for the Dump ONLY they actually say in the description ' ...does NOT fit R34 / Stagea... ' So go figure? Plan B is to just buy it + high flow cat and take it to my mech and ask him to make it fit. Although, the simplicity of a bolt on App. would be preferred.

Hey, Thanks for the feed back! Ah, I did look at the JJR items, also came across GK Tech's. They got a Dump + Front with Flex piece going real cheap. But they list the 'Dump' as not R34/Stagea compatible ? I also went on the C.E.S site... They dont list a Stagea but they do have a R34 GTT split Dump/Front. Id hope it would be a direct fit as the price would hurt me. Ok, Im just looking at JustJap now. Im 'trying' to get away with a one piece Dump/Front. Im looking at the 'JJR Mild Steel 3" Bellmouth Front/Dump Pipe - Nissan'. Now Ive noticed they list the 'Direct Fit - Nissan Skyline R34 GTT (RB25DET)' one seperate to the 'Direct Fit - Nissan Skyline R32/R33 GTS-T/Stagea WGNC34'. Now Im assuming that the R32/R33/Stagea one would be to suit S1 Stagea...? Or is JustJap just listing 2x for the sake of it? Thanks

Bump

Hey team, Im currently shopping for a Dump + Front or a Dump/Front combo etc for my S2 Stagea. I was under the general impression that a R33 dump&front would bolt straight on, But then someone mentioned that the Neo engines may sit a little bit higher then the usual RB25's? there fore the front pipe would rub against the firewall and floor. So I thought I might just buy a Dump and get a front pipe made to suit... But... I was hoping to purchase a C.E.S dump. But might opt' for a cheaper item. Provided its not stainless I'll be more then happy. So Im curious what everyone is running? Pictures would be much appreciated Aerron

Oh ok. I never knew there was a difference And to clear it up, only the white one is for sale?

Im interested in the back one... But out of curiosity... what do you mean 10 and 12 mm? I already have a white one, and thought a Black one would be cool to have aswell edit: I just read "white in colour ..." But still... 10 & 12mm? please explain...

Sorry, all Silvia's (S13, S14, S15) all use the caliper for the hand brake. They're not equipped with a Drum Style hand brake.

I went into my local Super Cheap and just grabbed the Gates Belts book. It actually lists S1 + S2 Stageas in there. They're 90% generic within the RB family. But I only found them in the Blue 'performance' range. No complaints here

I was wondering if its anyone on the forum. I ALWAYS see a Silver S1 outside the ANZ in Miami, Gold Coast around 10pm... most nights.

Price Drop $ 2 5 0 . 0 0 + postage

I believe its a Neo turbo thing. My mates Stagea and anothers R34 and mine all make a 'hair dryer' sound? We're all running Pods now and the sound is still there. Conclusion : its normal

Spotted a Silver S2 at Harbour Town today. Gold Coast.

Yeah I was thinking Stagea aswell, but with out proof I didnt really want to advertise it I was really hoping to get close to what I paid for them... :S Also, I cant really imagine they would be of much use in a Stagea as they're really for a performance purpose. Any other time the hand brake is used is at a stand still, so no real wear and tear is done. I bought them for drifting. But thats out the window now...

Bump

Spotted a YELLOW S2 with Dayz kit... Turning into Sunshine Plaza on the Gold Coast Hwy about 8:30am?

Hey team, I got a BRAND NEW set of PROJECT MU Handbrake Shoes here STILL IN BOX! I got these direct out of Japan about 2x months ago. I bought these for my HCR32 Skyline but, as Ive sold the Skyline I don't really have anything to install them into... The box says "Skyline, Fairlady Z Skyline GTR. BNR32 ~ BNR34" Can be seen in picture below. Located on the Gold Coast. I'm asking $300 firm as that's what I paid for them. Will POST at Buyers expense. 0414 595 397 or PM

Sold ^_^

Bump