Scotty_ecr-33

Yeah ok then, it is a street car I can just put 2 bungs in so it’s not vta So non vta should be legal ? Even though it’s running a screamer pipe [emoji108] (They haven’t found that yet) would rather it be legal, easy to see the catch can and never had an issue with current setup with them

Ok great thnx guys good to hear setup was sort of ok to start with Except no baffle This is the kit I have on the way This should do the job then yeah? Twin filter/baffle Any other recommendations??

No just straight through into can Why would it have pipe from turbo inlet ? Suck it straight through into turbo I would have thought The ally catch can I have has no steel wool or anything just a can with drain plug Have a new can on the way with steel wool filter thing Want to setup the pipes right

This is the current setup for my catch can which I did not do, have been freshening up everything I am now up to redoing the catch can setup and this doesn’t seem right (pipe from turbo intake???) Don’t have any of the standard pipes on the hot side any more just what you see Pic is of my actual engine bay I no it’s been talked about before But can’t seem to find any real help to my application if it’s right or not Just want to no how to setup properly with what I have Any help greatly appreciated Cheers

Oh really is that all? I have looked at that, does that have a G meter or something? Thought they might be like a switch or something in the front Thnx guys

Hey all want to put the stock airbag steering wheel back on my s2 r33 Wondering where the front impact crash sensor is located and what it looks like?? No airbags deployed just has aftermarket steering wheel on it Thnx in advance any help appreciated Pic of my ride for attention [emoji108]

No jump start I charged the battery again once it went flat Will look into reset alarm and check relays see how I go thnx

Please help my r33 key light stays on all the time when car is locked unlock the car and it goes away it’s like it’s in reverse working out all the bugs of my new car finally found what is slowly killing my battery thnx in advance any help appreciated

bump more pics

Here i have for sale is my 1/5 scale buggy i have spent over $1000 on hop ups alone $500 on tyres and rima comes with paddle tyres for the beach front and rear/ and badlands rear and dirt buster(road/dirt) on the front. steel cage with handle (buggy is about 22kg) power pipe (sounds fkn mad like a little kx60cc) had cops come to local park several times with compliant of 2 stroke motor bike (they leave laughing) does approx 70kmh with current gearing have gearing for about 60kmh but does monos in the sand taking off, you can get 2speed which will fkn fly (ebay $200) lots and lots of integy light alloy (upper/lower front and rear arms, full rear alloy hubs, alloy chassis, allloy front shock tower, lots lots more no point adding look at photos, its currently not rtr, it has no probs at all just needs a pinion gear which is comeing to me tomorw so if some one wants it tonite they cant? maybe by wed! overall its a solid big boys toy please if you are thinking of buying at for your son or something a would atleast say 17yo + atleast. its 29cc very loud fast and dangerouse yer you may laugh i have had one person who i used to take my buggy out with tell me he ran into his mate buy accident and broke his ankel at only half throttle. lots more i could talk about but cant be botherd please sms me with any questions if you intersetd $1300 complete with everything i have also charger and rechargeable batterys for everything can get lots more pics off acc too what i am really looking for is a apexo power fc for rb25 ser2 willing to swap! may consider all upgrades for 33 scotty 0409746492 vic mooroolbark

i have for sale my old engine out of my r33 s2 manual which the bottom end went, as it was my first skyline going from commodores and not knowing much about skylines bought the car running 14psi with highflow turbo, highflow cooler, kappatsu supercomputer which i dont no too much about? it does remove the speed limiter!, came with dyno for 221kw atw?? all dynos are different, and to cut it short a whole lot of fun for about 1month and started ticking??thort it was oil $90 motul oil then no change changed to a bit of a knock and got louder all of sudden on the way home from nunawading im sure i head like a sorta scratch squeel with louder knock, so turned car off sat in nunwading got towd bak home then 5k later nizpro turbocharging pulled out and installed new engine and it has sat in my carport for about 3months now havnt touched it all! 100% complete minus airbox i do have afm but cracked where it joins with clamp usable or fixable but no use to me also have s2 auto comp(came with auto s2 engine i bought) auto s2 loom! and the kappatsu super computer the highflow turbo has shaft play and i think theres a few small pieces chipped off wheels i am willing to sell some things seperate $500 the lot located melb

i am very interestd in ur pc but i live in vic? poastage? any specific parts you may need for rb25 i have a complete engine with all the acc/computers/looms? cheerz

i have another computer which i have no idea of the value or any specs what so eva! before i did the bottom end in my car running 14psi, high flown r33 turbo, high flow front mount and rest of engine standard, it did 221kw atw. have dyno sheet to proove. so must make some sort of a difference to standard. other than that i have no other information on the computer at all, was running fine until the bottom end went please if any one else knows any info on the computer(will post pic) pls feel free to let me know i am aslo interestd! located melb will post at later date if not sold but pick up only for now! $400 neg (have no idea what its worth at the moment will keep looking for more info, also found another car saying it has this computer? heres the link http://www.trademe.co.nz/nz/auction-236890408.htm

i have a spare loom and computer that came from a complete engine package a brought, it came from a r33 s2 auto. i have never actualy used either of them but the guy i brought it off said it all ran fine and i can vouch for the motor they came from being fine to! as far as i can see there is no damage wat so eva to the wirng. located melb pick up only for now! $200

i have a spare loom and computer that came from a complete engine package a brought, it came from a r33 s2 auto. i have never actualy used either of them but the guy i brought it off said it all ran fine and i can vouch for the motor they came from being fine to! as far as i can see there is no damage wat so eva to the wirng. located melb pick up only for now! $200