asps91
-
Posts
368 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by asps91
-
-
Better pic of the seal
-
Hi guys, I'm am going down the route of single turbo on my r33 gtr so before I even got to use these dump pipes, I have to get rid of them. They are made from stainless and tig welded by am performance (http://www.amperformance.com.au/). They are much better than other screamer dumps as they completely seal the exhuast from the waste gate and allow for better spool up and frees up the exhuast. If you want any more information please let me know. They are to suit stock or aftermarket bolt on turbos.
$700 to your door!
-
I was comparing them to -7's. sorry to confuse you.
And I'm going to try for more than 350.
-
OP, if it were me (with a standard bottom end), I'd be putting -9's on it, pegging it at 23 psi or so and make a responsive 340-350 on E85 - seeing that you're going down the E85 route anyway. The car will have much more area under the curve than a -5 car. I really think -5's on a 2.6 are still a bees dick too big. They really need a stroker.
I'd offer my own car up for a drive but my box is
deaded and its not really a fair comparison to what you're going to get with a stock engine.
Ive been in a car with n1's and supporting mods and it wasnt for me. I think we are going to aim for a higher number than that at the moment and the whole reason for the e85 is to make it that little bit safer at increase power levels. I know some people may consider it as a bit of a ticking time bomb, but there are plenty of guys in the high 300's around the world on completely stock engines. And nevertheless I am prepared to forge it if it blows and then chase even more power.
-
Meh, just pay someone to do it. I am
-
What type of poncams?
-
It's possible on e85
-
if u want to come out to chester hill i take u for a spin 440 kw -5
Now that would just be a tease
I can't chase that much power on my stock engine
-
I live in carlingford/ epping. 426kw would be epic. Supporting mods?
-
-
If your chasing 400, get ready for disappointment...
Hey may not make those numbers... Even on e85. But it would be as responsive as hell.
-
Andy i have the t517z 10cm on mine and i can show you that, ive gone straight to a gtx3076r (sitting next to me right now <3) because unless you plan on building your engine the gt35 is too big and lagy for the standard internal 2.6 You can push the gtx3076r to 400+kw on e85 and anything past that on a standard block and your asking for trouble. Ill only have these turbos on the car for the next few weeks then its all coming off for the single.
Yea mate, pm me your number. Would love to come around and check it out. About due for a catch up anyhow. I'm going to keep stock internals for now and see how far we can push it. I may look at a rb26/30 if or when she blows.
-
What capacity is your motor?
What kinda power are you chasing?
What fuel will be used?
Driven 5's on a 2.8L and hold the faaark on after 4K on a 2.6L id say itd take around the 5K+ zone before things get exciting
Hey mate, keeping it a 2.6 for now. Chasing 350kw+ on e85. Stock bottom end.
-
Hey mate, I have -5s prob wont have the car back for a week or so... getting CV joint sorted happy to take you for a spin if you can wait
Mate, that would be awesome! Shoot me a pm when you get the car back! Thanks mate
-
Hi guys,
I was wondering if someone in the Sydney area can help me out. I'm currently looking at installing 2860-5 to my car. I have purchased everything that I need to do this.
The drama I'm having now is the thought of going straight to a single gt35r or simular. I really want to make sure I will be happy with the /5's. can anyone in Sydney take me for a spin? (you drive of course) so I can be sure I am doing the right thing :pi really want to feel how the power is delivered. No point on going to all this effort for disappointment when I could have done it another way in the first place.
Can meet at a maccas or servo of wherever required. Would really appreciate it!
-
-
-
Hey guys,
I'm selling my mates almost new xxr 527 18x8.75 wheels. They are in great condition apart from a few minor stone chips. Zero gutter rash. Offset is +20 for the rears and +35 for the fronts. Stud pattern can be 5x114.3 or 4x114.3.
Come with khumo ku36 tyres, three have around 30-40% tread and one is completely gone.
They can be veiwed in Carlingford, Sydney. Sorry, pickup only!
$1100 Ono.
Pm me if your interested.
Thanks
-
-
When your inconsiderate ex applies foundation to her cake face in the car with her hands and then proceeds to touch the dash and/ or door cards. Could never get those stains out of my old supra
-
-
Bump. Injectors still available
-
-
And the front bar, steering wheel and teins! Haha
Xxr 527 18X8.75 + 20 +35 Nsw
in For Sale (Private Car Parts and Accessories)
Posted
back up for sale! lol