asps91
-
Posts
368 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by asps91
-
-
Bump, if i cant find something this week im going custom. Dont really want to spend more that 500 on a used system.
-
-
-
^^ haha thats mad
-
Was his name Daniel? If so, my little brother
-
My intercooler pipe beading tool. Exhahust clamp, washer and a vice grip.
-
1
-
-
Hmm.... There is no way mine are going in with a mallet.
-
Yea, looks like i may have too. I bought the super dagger listed above but am really disappointed with the 3 inch step downs.
-
Hi Guys, as topic states, looking for a 100mm intercooler to suit a gtr. Let me know what you have! Thanks.
-
-
fark, well thats a hole lot easier than wrestling the thing on and trying to squeeze some extra hands in there to do the vband clamp! thanks
-
Just a thought, if i pump some pressure into the vac line through my compressor wont the valve open up and the valve seat go with it?
-
Sweet thanks mate
-
sydney but willing to freight or post
-
Whats the diameter of the piping?
-
I bought a set of these -12 fittings of a guy on here who didnt use his. Im having a lot of trouble installing them. Ive tried heating up the valve cover and freezing the fittings and having at them with a rubber mallet but they wont go it t all? Any tips?
-
Hi guys, selling the following.
-6x stock rb26 injectors, working fine $200
-stock cam gears $50
-apexi pods with afm's $150 (can seperate)
-rs-r 3 inch r33 gtr gtst ect exhuast system. This includes a high flow cat. Qulity jap system very strait through and lovely sounding. $250
-r33 gtr gtst 3.5 inch hks super dragger cat back. $250
-Stock r33 gtr turbos including dumos and manifolds (workimg fine when removed) $250
-stock washer bottle to suit r33/ r34 gtr $40
-r33 carbon canister $20
-r33 gtr stock intercooler $60
If you need any specific pictures please let me know and ill post them up... Otherwise im sure you know what everything looks like
Pm me or message on 0404 111 174.
-
Try it with the new Turbosmart HP range, 45psi of spring would be a bitch.
Can you get in there with a lever? I sometimes have to put a block of wood on top of the gate and lever it with something to keep pressure on it, while someone else does up the bolt.
I might actually be able to lever it with a pry bar off the sway bar.
-
I'm also assuming that your exhaust isn't plumbed up for the gate either?
If so don't worry about it, leave it to the exhaust shop
Not plumbing the gate in either.
-
What manifold do you have?
Not 100% sure, it came with the kit i purchased. Seems quality before and the gate was fitted to it without a drama on an r32 gtr (i have an r33 gtr)
-
Damn... Shame there is shit all room down there. Should of mounted it while he manifold was off
-
Your both right, the pressure i had to apply to mate the surfaces was extreme. Im not able to do the clamp up and keep it compresed. Is there a trick to doing this?
-
Hahaha that's not a stupid question. Any help or suggestions are much appreciated (especially when im so close to getting this thing on the road). It feels pretty solid though so I'm not sure if that would work. It feels like there is a gap between the two flanges becuase of tge valve seat ring.
-
Hi guys, my mate and i attempted to mount a tial 44mm waste gate onto my manifold today and ran into a few dramas. I bought the gate without the v-band clamps so went down to gcg turbos to get a vband. It fits on the waste gate inlet and the manifold individually but will not clamp when the surfaces are mated. It seems as if the clamp is too narrow to get around both flanges. Are there specific v-bands that suit the tial 44mm gates? Thanks
Oem Brand New Rb26 Engine Cover Decal
in For Sale (Private Car Parts and Accessories)
Posted
Hi guys, im not using this engine cover decal so im putting it up for sale. Purchased from nissan australia so taking a bit of a loss here
$100
Not mutch to say other than will look the goods on a fresh painted set ofengine covers
Me me or contact 0404111174.
Willing to post.