<<<this guy

Hey a long shot but looking for mint R32 gtr 16" factory wheels. I am from Vancouver BC. Got some feelers out here but thought I would have more luck with you guys! Cheers PM me if you got something C

Hey there! Need some Aussie love here! I am in Canada first off. The short story is I got a new Haltech Platinumm Pro ECU installed and tuned. The guy did a great job and got me 398HP with a single turbo and injectors on stock internals on 17psi I believe. Anyways there was no codes on my ETS before but now I get a code 21 (throttle sense). I get a 4wd light on the first start of the day but every other start in the day no code. When light comes on yes I get 2wd only. I have followed the manual to trouble shoot but everything checks out - replaced tps replaced ets and wiring must be ok because the fault only comes on with the first start of the day. Turn engine off and restart many times after and no fault Sooo to my question and what I am working on. TPS input I set to .5V no throttle (in the tuning software) and press throttle to floor and hit set and comes to 4.8V ish The tps input filter recommends 5 I believe and have tried 0 to 8 and 21 code still pops up. TPS output setting I just found which is the setting for signal out to the ETS in the trunk. I just set the filter to 10... I started once (cold start) and no code but this is nothing new its intermittent. Soooooooooo I guess the main question would be has anyone know of someone that had 4WD issues after new ECU and what would be a safe setting for the TPS input filter and Output filter?? Please ask around for you aussies have been playing with these cars alot longer than us haha Thanks

Also forgot to mention I got a haltech plat pro ecu... there is tps inputs and a filter. Is there a output setting for the signal to the attesa ets? I set the input filter to 0 and have set open throttle from .38 to .5Volts

Hey everyone, To start with I have a 1992 GTR. I have a tps (21 flashes on ets) code fault, light on dash only comes on on first start. If I shut off car and restart no code. Problem started after I took my car into a performance shop in Vancouver BC for a single turbo conv. , ABS delete, and performance battery. I have tried this: 1: brand new tps - still problem 2: tried another ets controller unit - still problem 3: tested wired at ets unit 47 and 48 and got .4V 4: set my open throttle with laptop on tps to .5V open throttle One thing that bothers me is my tiny lithium battery (LFX36L3-BS12) (http://shoraipower.com/lfx36l3-bs12-p130) they put in for maybe on first start and charging all electronics and cranking engine voltage drops to a level that will trip tps V code? Anyone have any thoughts? So with the ABS gone I get code 8 and 9 but with what I ascertain this will not effect AWD?! And then the code 21 on top of these. Thanks

Hey buddy! Ya Kitimatt is 9 hours from Williams Lake where I am presently! moving to Vancouver BC soon so can almost drive the GTR year round! well when its not raining so ya 6 months a year still haha. Maybe I will do a ground up in a year a 2! Thinking I would enjoy it! Thanks again for sharing your labor of love! NOW GET BACK TO WORK! need more pics haha

BRAVO! I have a gun grey R32 in BC Canada and always thought about doing a major as you are! I would have to buy a second GTR for I think I might miss driving it for that long haha. Nice work man! inspiring to say the least!