turbo76lx

Qorx, it's a bit tight to run twins and the HKS 2510's needed to be rebuilt so I've just gone a GT 3582r.

Pipe from the turbo to the intercooler tacked up and made an air box and a duct from the front spoiler to the underside of the air box.

Making up the exhaust manifold, used the bracket i made to work out where i was mounting the turbo to make up a jig. Started making the colector by cutting up 4 peices of 1.5" sch 40 pipe and welding 2 together. After they were welded together i cut the peak off and cut out the side so they merge to one point. After that they are welded together and while still hot i hammered the sides flat to make more of a rectangular opening. From there i started planning how i was running the pipes. Manifold tacked up. Braking out the runners to weld up each one. Manifold welded up but going to change the angle of the turbo flange and need to work out where i'm pitting the wastegate.

Mounting the intercooler and piping. Also made a radiator over flow tank and catch can.

Pulled the motor and gearbox out of the skyline and took the head off and sat it on the rb30 in the test mule. Left the twin turbos on but will be running a single. Will be using a modified torana brake booster with commodore master cylinder.

I will be parting out the gts-4 when I have finished harvesting parts. Making the fuel tank. Using a holley blue for the llift pump to the 4 litre surge tank then to a bosch 044 pump.

Rear floor patched to allow the 50x50 angle for the rear subframe mount to sit against the floor and put the subfame in. Looks like i will be able to mount the coilovers on the original shocker mounts without cutting in the wheel arch. Rear mounts welded and the rear coilovers sorted, using R32 BC racing coilovers with R33 lower mounts.

This is the GTS-4 i will be using the drive line from, it's got the drive line from a GTR R33.

Shortened the steering column and made up a shaft between the torana steering knuckle and the skyline one. Harvesting more parts. Looking at trying gtr R33 rear subframe instead of the R32.

Started fitting the gear box and trans tunnel, this is the bit that worries me because of the amount of floor that needs to be cut out. You can see how much needs to be cut out. Fitting the gtr floor, it follows the torana floor fairly closely.

Setting up the front end. Jig to relocate the suspension towers. Fitting into the torana. Subframe mounted. Front suspension. Motor in. Sitting on the ground.

Yes before you all start i know there was no LX GTR but what if i made one but the GTR part was from a different car maker. Now you're thinking what's this idiot on about, before you read on if you don't like to see torana's modified beyond the norm or skyline being cut up, look away now. So the idea is to take a LX hatch and a nissan R32 gtr skyline and mix them together. From the outside it will look like a LX hatch with flares but underneath it will be the R32 AWD with a rb26/30. I've already run the idea past an engineer who has given the go ahead. To start with i'm setting the running gear up in an old rusty shell before i start cutting up the hatch. The R32 GTR shell i'm using for parts. Jig to relocate the rear suspension. Setting up the rear end. Check (if you live in usa): Publix Weekly Ad, or Big W toy catalogue.

Hi would you have the power steering pump and mounting bracket?

Hi, do you have a power steering pump and mounting bracket. thanks.

Location?

There are cracks in the paint across the bottom. http://i664.photobuc...ts/IMGP1882.jpg One of the inner plastic tabs are broken. http://i664.photobuc...ts/IMGP1886.jpg The exhaust melted some of the plastic and 2 puncher in the plastic off the the left. http://i664.photobuc...ts/IMGP1883.jpg If you work out the freight from your end i'm happy to drop it off at the depo. If you still want it you can have it for $40.

Parts sold pedals wiring loom doors door rubbers 1/4 windows boot rubber hicas clock power steering cooler tube stainless trim around doors A pillar trim a couple of pieces from the random pipes. More photos of the r/h 1/4 panel

Pedals sold. 1/4 windows, stainless trim around doors and loom on hold pending payment.

Doors Door rubbers Boot rubber Power steering cooler tube Hicas clock On hold pending payment.

Also have a rear reo and plactic bumper. Plactic has a few cracks and dints $60 Bonnet hinges $20 The plactic vents under the carpet $5 http://i664.photobuc...ts/IMGP1719.jpg Uncut fuel, brake and hicas lines FREE http://i664.photobuc...ts/IMGP1724.jpg

Cleaning out the shed got a few parts from a R32 gtr that need to go, will post smaller parts, larger items are pickup from Shepparton Vic When you pick up your parts you get to take a few things FREE from the mystery box of random parts. Contact, post up here or pm or call 0409021790 after 5pm Thanks Glen Negotiable on all parts. Wiring loom, missing the engine loom. $100 http://i664.photobuc...ts/IMGP1732.jpg Random pipes $40 the lot Roof $20 http://i664.photobuc...ts/IMGP1731.jpg Parcel shelf good for fixing sub holes $10 http://i664.photobuc...ts/IMGP1729.jpg Radiator support pannel $50 Windscreen washer bottle, needs a good clean, faded not cracked $5 http://i664.photobuc...ts/IMGP1721.jpg A pillar trim one has a small cut in it from cutting the windscreen out $15 http://i664.photobuc...ts/IMGP1722.jpg Door seals $30 http://i664.photobuc...ts/IMGP1723.jpg Boot seal $15 http://i664.photobuc...ts/IMGP1718.jpg Door scuff plates $15 http://i664.photobuc...ts/IMGP1717.jpg Stainless trim around doors $15 Boot trim $10 Tail lights $30 each 1/4 windows $15 each http://i664.photobuc...ts/IMGP1713.jpg R/H 1/4 some rust at the bottom $50 L/H 1/4 has a dint $50 R/H door with mirror, glass and window regulator, no door card. $75 L/H door with mirror, glass and window regulator, no door card. $75 A/C fan $10 http://s664.photobuc...nt=IMGP1705.jpg Door, boot, ignition locks with 1 key $100 Power steering cooler tube $10 Hicas steering wheels clock $10 http://i664.photobuc...ts/IMGP1726.jpg Hicas valve $5 http://i664.photobuc...ts/IMGP1703.jpg Pedals $20 lot Fan and heat box $10 http://i664.photobuc...ts/IMGP1701.jpg Rear tail light section $10 http://i664.photobuc...ts/IMGP1727.jpg Boot $20 The mystery box of random bits.

Gearbox?

I'll take the N1 oil pump if it's not sold yet.

pm sent.

Hi i'll take the engine mounts no.49, give me a total with postage to 3630. Thanks