PT

R33 standard Fuel Pump with complete cradle/wiring/cover etc $50neg PM here

Make: Nissan Model: S15 200SX (ADM, Spec S) Milage: 80,000km Transmission: Manual Colour: Pewter Location: Adelaide, SA RWC supplied? N/A---> no such thing as an RWC in SA, it's rego'd or it's not here Currently registered? Yes Price: $35,000neg Contact: PM or 0401 030 630 Comments: I have built this car up myself, originally had exhaust and FMIC, about the only work I didn't do was the cams and clutch/gearbox (work done by Tilbrook's instead). Serviced every 5000km with Motul 8100, books/records available. Just clocked over 80,000km and will be going in for a full service this week. Car has been thought out and modified in all areas, has been built not to attract too much attention, never been defected or hassled by police, currently runs on 1.0Bar daily (though was tuned on 1.1Bar ~240rwkw), has been to Mallala once the rest of the time it's my daily driver, average temps on the street are 80-82deg water and 80-85deg oil with the present cooling setup, peak temps never exceeded 88deg water and 94deg oil and the car is never pushed hard on hot days......overall a very complete car as is be it street or track or both Modifications: ENGINE Trust/Greddy T518Z turbo 8cm HKS step 1 cams Tomei rocker arm stoppers Apexi Power FC Greddy Profec B II FMIC (hybrid style but custom piping) Standard cast iron manifold Tomei stainless dump pipe 3†front pipe and high flow cat X-force cat back (customised and cut to sit closer to body of car) Apexi Pod Filter Z32 AFM Custom SS intake pipe Custom CAI and heat shield/partion Trust/Greddy Type S BOV Signal catch can Nismo engine mounts DRIVELINE RB25DET g'box with custom SR bellhousing (fitted with billet selectors for 3rd & 4th ~$900 each) Nismo g'box mount Veilside gear knob and custom shifter New "Rebuildable" Ford yoke/uni joint for tailshaft OS Giken TS2CD twin plate clutch Braided clutch line ADR approved Nismo 2-way diff with 4.36 ratio Alloy cradle bushes BRAKES--->installed about a month ago R33 front/rear calipers...freshly powder coated (calipers rebuilt with new seals/dust covers/channel o-rings) New RDA slotted rotors front and rear New Lucas TRW pads front and rear Motul Dot 5.1 brake fluid (higher temp and specifically designed for ABS vehicles) Drum handbrake from R33 connected RIMS/SUSPENSION 17" Rays Volk TE37's in bronze (8.5" +30 and 9" +40) Toyo T1R's 235/45 and 255/40 tyres Rays Duralumin lock nuts Tein Super Drift coilovers with 8/6 springs (can lower another 3" front and rear without affecting preload, spare springs for 10/8 included) Tein adjustable front camber tops Tein EDFC unit (in car electronic damping control adjustment for coilovers) Kazama adjustable castor rods D-Project adjustable rear camber arms D-Project adjustable rear toe arms Cusco front strut brace Cusco rear strut brace (below parcel shelf type) FUEL SYSTEM Nismo fuel pump Nismo 740cc/min injectors COOLING SYSTEM S14 thick single core rad R34 clutch fan Trust/Grex oil cooler kit with thermo and filter relocation (full braided lines with Earl's fittings) INTERIOR Trust/Greddy electronic warning gauges x3 (matching silver face/amber light) -boost -oil pressure -oil temp Trust/Greddy dual guage holder for A-pillar and separate Blitz guage holder Bride Ergo 1.5 with genuine Bride driver's super low rail Pioneer CD/MP3 player MB Quartz front splits Pioneer 12" sub in box Crossfire amp Images: note brakes were fitted after these shots

clutch fan sold .....can't edit posts anymore????

not sure as the shell has gone now. it was the original factory white colour for series 2 R33 skyline PM replied, clutch fan on hold for you only have the passenger window switch left (driver's sold)

To Fit: R33 skyline series II (front end crash) Location: SA Contact: PM or post here Comments: I only have the parts listed below, if it's not listed then I don't have it so please don't PM asking for certain parts.........it's either listed below or it's not If you are in SA and can pick up reasonable offers accepted....damn cheap as is, for interstate buyers prices are firm and postage is at your expense. Link to all pics labelled and in here---> http://s127.photobucket.com/albums/p148/PT15/ (if no pic found then you should know what it looks like already) Razo shift knob $50 http://i127.photobucket.com/albums/p148/PT15/RAZOknob.jpg Speco boost guage (mechanical with cup holder, silver 52mm, reads to 30psi) $75 http://i127.photobucket.com/albums/p148/PT15/Specoboost.jpg Personal brand 320mm steering wheel (no boss kit) -complete with horn button (carbon centre), black leather wheel very good condition $75neg http://i127.photobucket.com/albums/p148/PT...teering0003.jpg Door skins excellent condition (with clips) $50 each ($65pair) http://i127.photobucket.com/albums/p148/PT...oorinterior.jpg http://i127.photobucket.com/albums/p148/PT...oorinterior.jpg passenger power window switch $20 Interior cabin carpet (no rips or stains etc) $100 Cluster plastic surround $20 Scuff panel for door shell (says "SKYLINE") $60pair http://i127.photobucket.com/albums/p148/PT...doorplastic.jpg Roof lining $50 Sunvisors EDIT: $20 the pair as I damaged a clip on passenger side Interior lights both $20 ($15 each) All interior surround plastics with x3 grab handles $120neg (ie all of rear + A/B pillars...no centre console/dash etc these already sold) http://i127.photobucket.com/albums/p148/PT...Rdoorpanels.jpg http://i127.photobucket.com/albums/p148/PT...riorrearALL.jpg RB25DET clutch fan assembly $80 direct bolt on to any SR/CA/RB http://i127.photobucket.com/albums/p148/PT...33clutchfan.jpg Seat belts with brackets/bolts $180 the lot (or $100 front/$100 rear) http://i127.photobucket.com/albums/p148/PT...LLseatbelts.jpg Passenger door COMPLETE with windows, power window motors,door seal, door handle etc are all included $150 http://i127.photobucket.com/albums/p148/PT15/0024.jpg driver door $100 (no window motor or window frame) http://i127.photobucket.com/albums/p148/PT15/0023.jpg Rubber seals for door shell L&R $50 ($35 each) Rubber seal for boot shell $20 Door ajar sensors complete $10pair if separating door parts: driver's door handle $30 passenger door handle $30 driver or passenger window $50 each (or $80 pair) passenger power window motor $50 Tail lights with covers/globes/wiring $80each ($120 pair) http://i127.photobucket.com/albums/p148/PT...nish_grille.jpg Weather strips L&R with all clips $50 --->pick up only http://i127.photobucket.com/albums/p148/PT15/windshields.jpg Rear reo bar (undamaged) $100 http://i127.photobucket.com/albums/p148/PT15/rearreobar.jpg Side skirts damaged see pics $40 pair http://i127.photobucket.com/albums/p148/PT15/sideskirts.jpg http://i127.photobucket.com/albums/p148/PT...skirtdamage.jpg Tie rod boots (front) $20pair Brake booster & manual brake pedal/bracket $70 Rear sway bar (standard with mounts) $40 Rear camber arms $30 pair Rear traction arms $30 pair Front ABS sensors complete L&R $30 pair Front wiper motor $20 Wiper stalk $30 Rad and A/C clamps $10 all 4 Horns x2 with wiring $20 Standard clutch cover and organic clutch plate $50 all items located in Adelaide, SA

rubber covers with a "ribbed" pattern on the, located at either end of your steering rack no pics for what I am selling them for it is not worth the time and effort.....they are what they are yep, but keeping it for my car, I have a 4.36 ratio diff coming out (ABS model) that will be for sale soon (has a 2 way centre)

finally got around to uploading pics of the powder coting job:

after trialling rims on mates r34 gtt (standards susp and no guard work), if they are the only offset options you have front: 8.5" +30 (or +25 if you want to really fill the guards) rear: 9.5" +38 (or +30 if you want to really fill th guards....will need to get the guards lipped if you lower it though) if you want something that looks decent and isn't hanging outside the guard go 8.5" +30 and 9.5" +38, but any offset higher than this will look sunken in

motor sold as did coilpacks/turbo etc car had a front end collision lights/rad support/guards/guard liners/bonnet all smashed

Item:Weather shields Condition:very good/excellent condition Price:$85neg To Fit: R33 skyline (2 door) Location:SA prefer pick up Contact: PM or post here Comments: no cracks, comes with clips needed to attach it

front/rear seats sold

contact www.greenline.jp for overhaul kit, excellent pricing and mine arrived in approx 7 days from when ordered

Salesman at motor bike joint tried telling me that Motul 5.1 is a silicon based fluid??????? Now I know Dot 5 is silicon, and quick google search shows that the Motul Dot 5.1 is definitely non-silicon based Question I have, not sure whether to get the Motul 5.1 or their higher temp RBF600 fluid, I'm upgrading the brakes on my S15 with R33 items new RDA slotted rotors and new TRW Lucas pads, the car has ABS and Motul advertise the 5.1 as ABS specific. The car see's the track every 1-2 months, mix of drift and club track days depending on what I can fit in with cheers

^^^what he said

Lots of R33 Series II PARTS Special SA ONLY PRICES....I want this gear gone, no postage etc, no holding, first in with cash get's the gear Weather strips/shields excellent condition, L&R with all clips $50 the pair Tail lights with covers/globes/wiring $100 the pair http://i127.photobucket.com/albums/p148/PT...nish_grille.jpg Interior gear...this is all I have, if it's not listed then I do not have it. Door skins (L & R) excellent/unmarked condition (with all clips) $30 each!!!!!!!! http://i127.photobucket.com/albums/p148/PT...oorinterior.jpg http://i127.photobucket.com/albums/p148/PT...oorinterior.jpg Plastic door piece excellent condition (says "SKYLINE") $60 $50 the pair http://i127.photobucket.com/albums/p148/PT...doorplastic.jpg Wiper stalk $25 Roof lining $50 $30 Interior cabin carpet (no rips or stains etc) $100 $50 Sunvisors $30 pair ($20 each) EDIT: $20 the pair as I damaged a clip on passenger side All rear interior surround plastics with x3 grab handles, including A-pillars $100 (ie all of rear + A/B pillars) http://i127.photobucket.com/albums/p148/PT...Rdoorpanels.jpg http://i127.photobucket.com/albums/p148/PT...riorrearALL.jpg Did someone say seats........................ Front seats $250 pair $150 pair http://i127.photobucket.com/albums/p148/PT15/frontseats.jpg Rear seats $100 $50 http://i127.photobucket.com/albums/p148/PT15/rearseats.jpg Seat belts with ALL brackets/bolts etc $100 front/$100 rear $75 front set/$75 rear set -->BOTH for $100 http://i127.photobucket.com/albums/p148/PT...LLseatbelts.jpg Doors, doors, doors, doors Passenger door complete with door seal, window, power window motor, door handle etc etc $150 $90!!! (has a paint chip as in pic) http://i127.photobucket.com/albums/p148/PT15/0024.jpg driver door $150 $80 (no power window motoror "Z" frame...still has window, seals, door handle) http://i127.photobucket.com/albums/p148/PT15/0023.jpg ....doors are cheap enough already and I won't split parts to sell cheaper, however..... ....if you are after separate parts yourself then: windows on their own are $50 each passenger window motor $30 door handles $20 each Brake booster & manual brake pedal/bracket $50 Rear sway bar (standard with mounts) $40 Rear camber arms $30 pair (sold as pair) Rear traction arms $30 pair (sold as pair) (shorter arm near front of wheel arch) Tie rod boots (front) $20pair Front ABS sensors complete $30 pair Rubber seals for boot and for both door frames on the shell $20 each or all 3 for $40 Rear reo bar (undamaged) $80 http://i127.photobucket.com/albums/p148/PT15/rearreobar.jpg Side skirts damaged see pics $30 pair http://i127.photobucket.com/albums/p148/PT15/sideskirts.jpg http://i127.photobucket.com/albums/p148/PT...skirtdamage.jpg Standard clutch/pressure plate and organic clutch plate $50 $30 (no flywheel) Greddy M-spec cold pipes for FMIC (only cold side) $30 $20http://i127.photobucket.com/albums/p148/PT...dycoldpipes.jpg Front wiper motor $20 Rad and A/C clamps $10 all 4 Horns x2 with wiring $15 Razo shift knob $50 $30 http://i127.photobucket.com/albums/p148/PT15/RAZOknob.jpg Speco boost guage (mechanical with cup holder, silver 52mm, reads to 30psi) $75 $50 http://i127.photobucket.com/albums/p148/PT15/Specoboost.jpg

group buy on RDA rotors are very cheap I rang a wrecker for price on used rear rotors for R33 and got quoted $200, you can get brand new RDA's for a touch less than that including delivery......needless to say I bought the RDA's

will chase it up soon along with the everyone elses

have you go the manual for it if not google Greddy and go to the USA home page, there is a link to "Technical" section and they have EVERY manual for the Greddy/Trust line up edit: http://www.greddy.com/tech/ ---> full list of manuals and http://www.greddy.com/img/PHP/products/pdf/682.pdf ---->profec B II manual, look in the last few pages re trouble shooting/basic tips when setting the EBC up do not worry about getting 14psi etc just aim to get a stable boost curve that is above wastegate pressure, read the manual it tells you how to adjust for boost drop off/boost spike/boost creep, once boost is stable then turn the SET value up to get desired boost

not sure if it will help your sale but fwiw I have an original manual for the Apexi Multichecker (if you need it/don't have one)

no all sold with engine

grille sold sorry

still available, need to chase up postage for you

unless it's actually slipping/free revving why replace it? fwiw I rebuilt my OS Giken twin (TR2CD model), cost me ~$900 all up, greenline.jp supplied the rebuild kit ~$800 and machining the flywheel was ~$75

no SMIC, the FMIC got smashed.....anything in front of, and including, the rad support is smashed, as are all the front suspension arms and front guards etc

PM replied