huddy

hi cash i have one in my shed that i am not using. it is not a light thing to send though... maybe keep it in mind if you cant find anything local (im in SA) cheers -Matt

pics of eyelids http://www.kansaiautomotive.com/importedparts.htm

thats correct, then it will be sorta clipped in, so may need to use a little force to pull it toward the front of the car (standing looking at main headlight, pull indicator/parker towards you). Then you will be able to access globe.

ahhh crap thats no good... edited for ya mate

yep i did hicas to NON-HICAS rear cradle swap aswell no more f**ked out ball joints

hmmm well not much to report, but i'm back from Japan, and i have some new found inspiration from the DMAX ceffy! also fitted KTS traction rods VS-ONE rear pillar brace strobies in reverse lights did a little more cleaning (FUN) got tomei cam gears aswell and Gates racing timing belt to get fitted. Also got a couple other little things that will set the car off. New look coming in the next few months

what he said ^^^ i did the install of power steering cooler - got one from an eb falcon, trans cooler to do the job - works a treat!!!

dirtturbo - best bet is to PM 1400r on the eyelids Wolfwood - i've added you to the list

more pics can be found here trial fitted on the KANSAI AUTOMOTIVE - RB26 cefiro. http://www.kansaiautomotive.com/importedparts.htm

good work - i bet jenna's happy now

mmmmmmmmmmmmmmmmmmmmmmmmmm thanks again champ

sure does ROY - should i add you to the list? as for 34 - only a31 at the moment

you actually broke broke yours??? wtf??? no one else got one of these on their cars??????

no worries dirtturbo - added to the list

yes, and considering i seen it in the flesh i get dibs hehe... it definitely has an awesome stance about it, even not moving!!!

eh ryan if i try and do it up loosely i cannot get the nut on the end

Hey I've got myself a Cusco tension rod - it goes in between the 2 castor rod brackets (metal sus part that attatches from lower rad support to castor rod). Now problem is, it doesn't fit! I checked the packaging etc and it say to suit - r32 / c33 / a31 etc... I have a whiteline swaybar that it just keeps fouling on. And with it in place, i cannot get it on the right angle to fit. Anybody else have one on their cefiro??? Please post pics if so Thanks -Matt

Hi Everyone Have on offer Cefiro Roof Spoilers, these are not copies and genuine direct from Japan - Fitment is PERFECT! can be secured to rear window with double sided tape, or sikaflex. Come in a white gel coat, just need a quick scuff and ready for paint. RRP is $250 on these, but Group Buy price is $200 each!!! which is a steal - DMAX roof spoilers usually go for around the $300 mark...! We need 5 people to make this happen 1. Dirtturbo 2. 3. 4. 5. Roof Spoilers are ready to be picked up from South Australia or posted (there will be a charge for postage). more pics here -> http://www.skylinesaustralia.com/forums/in...=0#entry3299630 thanks -Matt

hey guys i test fitted one of these roof spoilers on my car - what you think??? i reackon it looks PHAT!!! If anyone else wants one there is a group. RRP is usually $250, but if we get 5 people cost will be $200each!!!!!! (plus postage if required) Can be fitted easily with double sided tape / sikaflex for more permanent fix. FITMENT is PERFECT, been tested on 2 different ceffys! Please click the link for GROUP BUY -> http://www.skylinesaustralia.com/forums/in...howtopic=181692

yep - i tried - S13 / Stagea / R33 / R32 and all different lenghts - most of them would either line up in the short section, then the long one would be wrong - or the other way around... I just boxed mine up and they're better than new

hmmm ok - well i'm in japan at the moment and strolled into upgarage and found these dammmmnnn cheap!!! thats why im asking only info was in 256 9.0 lift ex 256 9.0 lift i searched and i think legend01 used the same camshafts in his rb20det, with standard springs - just trying to get confirmation

hey everyone need an answer urgently, have the chance to get some hks camshafts in and ex 256 with 9.0 lift - will it be ok in RB20DET with standard valve springs??? thanks -Huddy

lol yeah it will, but if there are leaks, at least they should be very obvious and can pick them up early. thanks guys

ok ok been a little while got the 2540 on and life is peachy... had some time before my next outing in the car so decided to take it off the road for a little bit and just do all the things you say "i'll get around to it one day..." just annoying things like leaks from not being sealed properly, dodgy wiring etc... started with removal of ALL hicas lines, from under crossmember all the way down to the diff, and solenoid thing aswell re-routed power steering cooler through reservoir (cheers showza) new catch can and modified with bigger fittings and filter on top fitted strobe lights into headlights re-wired all gay wiring through split tubing and tidied it up a bit removed intake plenum and painted top half black replaced knock sensors (as old ones were faulty) made myself a 3" ally intake pipe 45deg bend with silicon adaptors (cheers jarrod for welding on catch can return pipe) made a speedo drive ( from 1400r !!! thanks) modified and installed speedo drive painted rocker covers white painted cam cover whie painted piping white painted strut bar ends white rb24 sticker ( niiiicceeee ) new silicon hosing made brackets up for power steering cooler made bracket up for oil cooler secured intercooler again removed oil cooler kit re-sealed all oil cooler fittings (as they were all leaking before for over a year) cleaned engine bay with degreaser so yeah took a little bit of time to do, but needed it finished by today as i'm off to japan MONDAY !!! car runs! and put a smile on my face when i gassed it hehe!!! speedo drive works!!! on dash and on power fc hand controller knock sensors - unconclusive - will find out on dyno... but overall pretty happy with the results!

PRICE DROP!!!