Jump to content
SAU Community

Recommended Posts

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by pushead

a closer look at the yellow r34, errr no.. thats what i call ricey!

They had to go and mess it up with that handle...oh well!

Same exhaust as mine, kakimoto - out the side :D

They both look really clean!

Originally posted by CR34TION

thanks... done some research.. i think front 17x8 rear 17x9 (guessing)... which would be the same as the Evolution R 200sx.  He has front 215/45 rear 235/45.  I might go the same or 10mm wider front and rear.  The profile will be 45 as thisi s what it is on the stock r34 alloys.

I personally think that 215 is not wide enough, why would you want narrower than stock, on a wider than stock wheel :confused:

Originally posted by nismoR34

even car dealers write *tommy kiara* as long as they dont say *tommy ki-ora* then it will be fine!

yeah and we all know how very very little dealers know lol

hahaha tommy kiora

To be honest. i Love my car alot... but now i am running low of money as i am going to start a new business, it a white one and has HKS suspension on too... by the way if u see my dash u will love it for sure cause is a Digital for the KPH and its about 2.5 or 3 CM big.... That is the reason why i choose the car.... and its only 27K on clock... as u see in orther post i am trying to sell of all my orther part as well ... like denfi gauge and etc...opsss it also has the Xenon light as well ;)

Originally posted by pushead

check out the bushes. see the leaks? the guy said he can change these and cost only $8? is he talkin crap because im sure new bushes worth $150+

$8 pfffttt for new bushes!!

I just replaced mine with some whitline bushes and they cost $140.

If he would only spend $8 on bushes i wonder what other cheap shit is in those cars!

Originally posted by calvintys

anyone looking for a GTR body kit ..... i have order one from over sea as i plan to convert my GTT to GTR.... bumper, bonet, spoiler and etc .... by the way its all fiber grass

do you have rear 1/4 bigger guards?

How much are you looking @ for the whole lot? GTR bar, spoiler, bonnet etc...

well for the real guards, it will come with a guards which either u cut off from the body or another layer of fiber grass on it........ anyway i am not sure about the price as it still on the process of making it... but it sure will be finish by the end of next month ..... i think is around $2000

Originally posted by INASNT

$8 pfffttt for new bushes!!

I just replaced mine with some whitline bushes and they cost $140.  

If he would only spend $8 on bushes i wonder what other cheap shit is in those cars!

don';t know dude, but thats what he said. so CR34TION, be warn, bushes don't cost $8, they are around the $150 mark. Thanks for the info INASNT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...