Jump to content
SAU Community

Rb30 Or Rb25 In A Torana

chunk

By chunk,
in Wanted to Buy

 Share

Recommended Posts

chunk Newbie

chunk

Posted
Posted (edited)

hey guys just wonderin if anyone in here knows anyone that has done or knows how hard it would be to fit an rb 30 or rb25 into an lj torana...

thanks for ur help... an advice is good advice

and if anyone has a half cut for sale in brisbane...

Edited by chunk
Link to comment
https://www.sau.com.au/forums/topic/102227-rb30-or-rb25-in-a-torana/
Share on other sites
NVMYLH Apprentice

NVMYLH

Posted
Posted

Hey mate, all you really need to mount the engine is some Castlemain Rod Shop engine mounts. Cost about $150 i think, which is pretty good i reckon, no mucking around then, just drops straight in then. But you will need to make a crossmember for whatever gearbox you want to use. check out www.gmh-torana.com , there is a couple of people doing rb30-25 conversions on there.

chunk Newbie

chunk

Posted
  • Author
Posted

thanks for ya help guys...

does anyone know of a good mob around brissie that can do this for me as i cant do it...

a company wanna charge me around 7 to fit the engine gearbox and to put in a new 9" diff is that a good price...

thanks again ppls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...