Jump to content
SAU Community

Loud "click" Noise When Ignition Is Turned Off?

85URK

By 85URK,
in General Maintenance

 Share

Recommended Posts

85URK Grand Master

85URK

Posted
Posted

hey guys, when i turn my ignition off, behind the passenger seat in rear panel trim (thats where it sounds like its coming from or the boot area) there is a loud "click" noise something like the sound of when u lock all your central locking, it all goes click at once, but its only when u turn off the ignition??? its got me stuffed, any one had this problem aswell, and what could it be???

thanx daz.

Pantera999 Contributor

Pantera999

Posted
Posted
hey guys, when i turn my ignition off, behind the passenger seat in rear panel trim (thats where it sounds like its coming from or the boot area) there is a loud "click" noise something like the sound of when u lock all your central locking, it all goes click at once, but its only when u turn off the ignition??? its got me stuffed, any one had this problem aswell, and what could it be???

thanx daz.

Holy shiezen, Im going for fuel pump just switching off... that ones a dilly of a pickle :)

RANDY Veteran

RANDY

Posted
Posted

Hehhehe.. mine does that too! It's an electric tensioner on the seatbelts!

When the car is running, pull on the drivers belt... it resists a lot. Turn the car off... CLUNK! Now pull the belt... it's smooth with little resistance.

I pulled the rear quarters off when I removed my seat and ran wiring for my stereo, and the belt rolls have an electric something on it, with Australian branding. So I dare say it's an aftermarket thing that was fitted.

I have a pic at home if you're interested.

  • 1 month later...
85URK Grand Master

85URK

Posted
  • Author
Posted (edited)
Hehhehe.. mine does that too! It's an electric tensioner on the seatbelts!

When the car is running, pull on the drivers belt... it resists a lot. Turn the car off... CLUNK! Now pull the belt... it's smooth with little resistance.

I pulled the rear quarters off when I removed my seat and ran wiring for my stereo, and the belt rolls have an electric something on it, with Australian branding. So I dare say it's an aftermarket thing that was fitted.

I have a pic at home if you're interested.

yea post it up if you could, sorry i havent replied to this recently, i forgot all about it, just remembered today again. i though that it mite have sumthin to do with the seatbelts etc, but it was kinda wierd, bcoz it just started outta nowhere.... its pretty loud hey.

Edited by 85URK
RANDY Veteran

RANDY

Posted
Posted

Pretty loud, yeah!

I haven't had it for a while now, because my alarm's turbo timer keeps the ignition going after i've taken the belt off and gotten out of the car etc.

But yeah, have you tried pulling on it with the car running and not running? Could you feel the difference?

85URK Grand Master

85URK

Posted
  • Author
Posted
Pretty loud, yeah!

I haven't had it for a while now, because my alarm's turbo timer keeps the ignition going after i've taken the belt off and gotten out of the car etc.

But yeah, have you tried pulling on it with the car running and not running? Could you feel the difference?

yeah there is like a tensioner that only works when the car is going.

RANDY Veteran

RANDY

Posted
Posted

Umm.. no, I didn't. I found it when I made my new parcel-shelf. This is why a couple of shots are through the rear windscreen. =-]

The second pic shows the location. It's kinda under the parcel tray, but adjacent to the rear seat.

Oh, there's that little box that noone knows what it is for! Sits in the left bracket under the parcel tray in Series2's. The same bracket on the right-hand side is empty. Something to do with fuel, apparently.

But yeah, the seatbelt tensioner! Way cool, eh!? Looks to be an Aussie thing done, possibly during compliance. I don't think there is any way to "fix" the noise, cause it's a mechanical device. You could try unplugging it and having just regular spring-tensioned belts.

There is still a spring in them like normal belts, so this should work, and the teeth that grab the belt if it moves a certain speed should still work too. Best to test this though.

The third pic is of the front passenger belt. I had the rear passenger quarter-trim off to fix some broken clips and to run some RCA cables. It too looks to be wired for something, but it is not noisy, only the rears in my car.

Hope it helps! I love gadgets!

85URK Grand Master

85URK

Posted
  • Author
Posted
Umm.. no, I didn't. I found it when I made my new parcel-shelf. This is why a couple of shots are through the rear windscreen. =-]

The second pic shows the location. It's kinda under the parcel tray, but adjacent to the rear seat.

Oh, there's that little box that noone knows what it is for! Sits in the left bracket under the parcel tray in Series2's. The same bracket on the right-hand side is empty. Something to do with fuel, apparently.

But yeah, the seatbelt tensioner! Way cool, eh!? Looks to be an Aussie thing done, possibly during compliance. I don't think there is any way to "fix" the noise, cause it's a mechanical device. You could try unplugging it and having just regular spring-tensioned belts.

There is still a spring in them like normal belts, so this should work, and the teeth that grab the belt if it moves a certain speed should still work too. Best to test this though.

The third pic is of the front passenger belt. I had the rear passenger quarter-trim off to fix some broken clips and to run some RCA cables. It too looks to be wired for something, but it is not noisy, only the rears in my car.

Hope it helps! I love gadgets!

well i think il leave it, but if it gets worse or anything i mite pull it apart to look at. i just cant beleieve how noisey it is when u do it. u woulda thought that it was quite for a passenger car.... oh well. thanx for your diagnose anyway.

RANDY Veteran

RANDY

Posted
Posted

No worries... i've never seen it in anyone else's car, and noone seems to have ever heard of it before, but from what you describe, it's EXACTLY what mine does.

VERY lound clunk, and that seat-belt tension thing is wicked.

85URK Grand Master

85URK

Posted
  • Author
Posted
No worries... i've never seen it in anyone else's car, and noone seems to have ever heard of it before, but from what you describe, it's EXACTLY what mine does.

VERY lound clunk, and that seat-belt tension thing is wicked.

yeah my first though was it had sumthing to do with the seatbelt tensioner thingy, but its hard to explain what it is to sum1 who has never heard it. my mate were like "WTF" when they first heard it.lol i didnt know what to tell them, just said it sounds like the seat belt thingy to me. :D

  • 3 weeks later...
Samon Proficient

Samon

Posted
Posted

My 33 has these seatbelt tension thingys too... but they are connected to a wire under each front seat... looks like they used to be connected to the seatbelt socket thing. When the ignition is on, i can short the two pins on the blugs under the seat and there is the loud 'clunk' noise that you speak of. I've never really noticed too much of a difference between shorted and unshorted, but i'll have to try it out!

It sounds like yours are perminently shorted, so they always clunk when the ignition is turned off... try looking under the seats for a cord, and see if there is anything causing the two pins to be connected (the one on the passenger side is easiest, as it only has two pins, the drivers one has four.)

Samon Proficient

Samon

Posted
Posted

Okay, couldn't resist the temptation :rolleyes:

I went out and sat in in my car, turned the ignition on, and shorted/unshoreted the pins on the seatbelt connector... The belt seems to slide pretty much the same, although with the pins sgorted there is a slight ratchet-type noise when you pull it, whereas without the pins shorted it is quiet... I can't feel any more or less resistance either way though.

RANDY Veteran

RANDY

Posted
Posted

I think the "clunk" noise means that it's working, because mine will do it with ignition, and also if I press the seatbelt release button. Oh, and there is a definate change in resistance...

I think when the new compliance rules came out, the seatbelts had to be changed, whereas mine has the original jap belts according to the tag.

  • 4 years later...
Samuel Leonard Rising Star

Samuel Leonard

Posted
Posted
Hehhehe.. mine does that too! It's an electric tensioner on the seatbelts!

When the car is running, pull on the drivers belt... it resists a lot. Turn the car off... CLUNK! Now pull the belt... it's smooth with little resistance.

I pulled the rear quarters off when I removed my seat and ran wiring for my stereo, and the belt rolls have an electric something on it, with Australian branding. So I dare say it's an aftermarket thing that was fitted.

I have a pic at home if you're interested.

i have this also. i would've sworn black and blue it was hicas locking itself or something like that... i'll have a listen for the seat belts next time i have someone else near by to turn off the ignition. i'll jump into the back seat and listen... very interesting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Tein Circuit Master- rebuild worth it?

      By MBS206 · Posted

      If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • MBS206
      Best place to order Authetic R32 Parts in Japan

      By MBS206 · Posted

      Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • MBS206
      NC MX5

      By MBS206 · Posted

      Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • MBS206
      Blue slip

      By MBS206 · Posted

      I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...