Jump to content
SAU Community

Recommended Posts

Hey everyone im waitin for my new turbo to arrive n decided to replace it myself but as its my daily driver ive gotta have it back on the road asap so ive only got a day to to do the swap (would be a sunday).

Ive had a look with a mate an read the articles but neither of us have ever done anything like this before an with the small time frame i dun think its gonna happen.

Soooooo... if any of you are experienced with replacing turbos on rb25s, reckon ya can do it easily in a day (we can both help) live in Perth n wanna make sum quick cash gimme a shout. The turb im replacin it with is a direct bolt on replacement with internal wastegate to3/to4 (to4e)

Cheers Lee

Link to comment
https://www.sau.com.au/forums/topic/103929-cashy-to-replace-turbo/
Share on other sites

Sorry Lee, I am not in Perth so I can't help on the day. But a word of warning before you start, it might help save you from a lot of aggravation. I have NEVER EVER seen a replacement turbo (other than a high flow of the standard turbo) bolt up without making stuff. modifying parts, buying extra/different nuts and bolts or water and oil fittings. It is not that simple, I guarantee that you will need to buy stuff or have it made or modified and you won't be able to do that on a Sunday.

What I done have that works (sometimes) is to take off the standard turbo on a Friday night and compare it closely with the turbo you want to put on. Then go out first thing on Saturday morning and buy the parts that you need. Do your homework first, make sure the place you are going to buy the stuff from has stock and is open on Saturday mornings.

Better still go to your local turbo shop on the Monday (gives them time to get in parts) before the weekend you are going to do the work, armed with the new turbo and ask them what you will need to fit it in place of the standard turbo. If they know what they are doing there is a good chance you will get 99% of what you need. Still do the Friday comparison though and make sure they are open on Saturday morning for the other 1%.

Hope that helps

:ban: Cheers :wacko:

Edited by Sydneykid
1. I did the same turbo model conversion on my RB20DET

2.  Popped straight in, no fuss, no worries, no hassles. Everything lined up.

3. Maybe I got lucky???

1. The only description I could see was "to3/to4 (to4e)", I have no idea how you could tell it was "the same turbo model" as yours. It might be plain bearing for a start.

2. You didn't modify anything? Bought not one single extra part? You just got a turbo and it went straight on? No new gaskets? Or broken nuts? Stripped studs? LOcking tabs? Wastegate actuator lined up perfectly? And you did the swap over on a Sunday never having done a turbo change before?

3. You're not kidding, I'd call it a miracle.

Call me a pessimist if you like, but I have NEVER EVER seen it happen and I have been working on Nissans for 30+ years.

:ban: cheers :)

hey mate im willing to come give you a hand, if i get some spare time from doing my own engine, which is 99.9% done now, just gotta do some pipework and she is ready ;)

im willing to give you advice/assistant but ive mainly only dealt with rb26's and rb30's when removing turbos, but i'd assume its almost the same as the 30, and a damn sight easier than the 26 turbos.

i dont want any cash, as i dont want to be stuck doing all the work if u get my drift :P ill advise and get dirty but i dont want to be doing the lot, as some of my mates expect when i offer help.

so if u are doing it in a month or so ill be free ;)

give me a PM and i can give u my mobile no.

do u have axle stands, a jack, spanners, sockets, rachets, etc etc?

dont forget some new copper washers, and maybe a few spare studs incase u snap one. i'd also upgrade the dump pipe at the same time as its a pain in the arse trying to put the dump pipe on the turbo while in the car later on.

cheers

Brad

Good luck...also good to see you back Brad...the beast nearly ready??? :D

yes nearly, probably around 3-4 weeks still till a tune for running in, as i work full time plus i dont get much time after work each night and that only leaves weekends when im not working.

i need bits and pieces but i never have time to goto shops and buy them as i work 7:30am-4:30pm which doesnt give me long till shops shut each night :O

i'd much rather do it all myself though, as i know its done right, and not rushed, and saves money too :unsure:

cheers

Brad

1. The only description I could see was "to3/to4 (to4e)", I have no idea how you could tell it was "the same turbo model" as yours.  It might be plain bearing for a start.

2. You didn't modify anything?  Bought not one single extra part?  You just got a turbo and it went straight on?  No new gaskets? Or broken nuts? Stripped studs? LOcking tabs? Wastegate actuator lined up perfectly?  And you did the swap over on a Sunday never having done a turbo change before?

3. You're not kidding, I'd call it a miracle.

Call me a pessimist if you like, but I have NEVER EVER seen it happen and I have been working on Nissans for 30+ years.

:D cheers :P

A miracle happened - Call the Vatican!

The turbo is a T03/04 Ball bearing that came off my nephew's R33. We fitted it in 4 hours and used the same gaskets off his 33. We didn't break or strip anything doing it and it was my first time, though his third (most of the time all I did was watch).

The gaskets have held up fine because they were only 6 months old. My nephew is putting a VK45 in his 33 so he didn't need the snail anymore and he'd only had the puppy for 6 months before it was put in mine. When we finished the job she fired up with no leaks anywhere.

I've just confirmed with my nephew that when he fitted the turbo on his 33 from new she went on with no hassles and in the same time frame.

A mystery to all....

Id choose to replace a turbo gasket with new whenever i had the chance. They are not fun to need to replace.

I also chose to use copper lock nuts when i attached the dump pipe, didnt want to have the thing rattle off.

Better to be safe then sorry.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...