Jump to content
SAU Community

Recommended Posts

Hey Crew,

Talking to a guy from a local smash repairs shop today. I mentioned to him about my plans to get clear front and side indicators and also some Series 2 Taillights...

He was saying that often there is other options to turn the orange into clear without buying a whole new part. These are the options he said -

- Shaving the orange plastic untill you hit a clear layer

- Baking them (:D)

- Cutting off the orange plastic and getting a clear mould made up, then simply joining the two together

- Or just tinting them

What are your thoughts? Would any of them work at all?

Rear.jpg

I dont like the orange... ewww

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/
Share on other sites

  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i'm tinting mine very soon, decided to make them darker as opposed to getting the covers.

Should look a lot better too with the other things l'm doing.

Sounds good. Make sure you shoot us loads of pics! :D

What are you using to tint them?

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1923514
Share on other sites

Sounds good. Make sure you shoot us loads of pics! :D

What are you using to tint them?

I will. If possible l'll try n drop it off this week and get it done & the wing put on at the same time (and the colour coding).

Will be using 2pak black paint. Just do light coats til u get the desired look, then clear it.

The thought of blacker lights on a white car should look good, esp with the contrast from the black window tint.

Edited by [ STAGEN ]
Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1923536
Share on other sites

i'm getting a set of series 2 lights from japan sent over, should be here in a week. they cost me just over $500 including postage. a couple of sets i saw went for over $600, not including postage to Aus, i just got lucky in the auctions

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1923692
Share on other sites

I GUESS IF YOU'VE GOT THE MONEY GO THE SERIES 2 LIGHTS.

WE COULDN'T HAVE BEEN BOTHERED TRYIN TO FIND SOME SO WE JUST SMOKED OURS.

I MUST SAY NOW THAT WE DID IT, I'D MUCH PREFER THEM SMOKED TO THE SERIES 2 LIGHTS.

BUT I SPOSE THATS JUST A PERSONAL CHOICE...

ANYWAYZ HERE'S A PIC.post-25826-1139035536.jpg

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1923747
Share on other sites

WE JUST USED A TIN OF THAT NIGHTSHADES STUFF.

IF YOU DO IT MAKE SURE YOU CLEAN EM UP GOOD FIRST.

I THINK WE DID ABOUT 3-4 LIGHT COATS TIL WE GOT THE DESIRED DARKNESS WE LIKED.

I THINK THE TINS COST ABOUT $18-$20 BUCKS.

ONE THING IS THEY LOOK DULL TIL YOU HIT EM WITH SOME KANUBA WAX OR CAR POLISH.

I THINK IT COMES UP PRETTY SWEET MYSELF...

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1923786
Share on other sites

I GUESS IF YOU'VE GOT THE MONEY GO THE SERIES 2 LIGHTS.

WE COULDN'T HAVE BEEN BOTHERED TRYIN TO FIND SOME SO WE JUST SMOKED OURS.

I MUST SAY NOW THAT WE DID IT, I'D MUCH PREFER THEM SMOKED TO THE SERIES 2 LIGHTS.

BUT I SPOSE THATS JUST A PERSONAL CHOICE...

ANYWAYZ HERE'S A PIC.post-25826-1139035536.jpg

So thats not illegal at all?

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1924459
Share on other sites

hey krissy that looks crazy, wayyy better than clear shittas :(

just wondering how visable the actual brake/tail lights are when iluminated in the day and at night?

any chance of a pic in the day and one at night as too how bright the lights are when behind that nightshades, as im thinking thats the next thing ill do if they still iluminate enough to stop hassles from cops, etc :P

cheers

Brad

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1924509
Share on other sites

its very illegal, i got defected in my pulsar when i tinted its tail lights, and they gave me 48hrs to get the defect fixed and cleared :(

well, depends on the darkness i reckon, as with earlier commodores like vl's they have bright as orange lights on the executives and darker tinted looking lights on the calais, and they get away with it.

i think mums taxi's ones are abit too dark and cops would not pass it im 99.9% sure. the lights dont even look visable if lite up.

maybe a more sutle (sp?) look with only a few coats and still not totally black might be abit safer against potential police hassles.

i got a funny feeling almost every stagea on here will have tinted taillights after seeing the pics :lol: people will begin to think its standard fitment on series 1's and series 2 have the clear lights haha

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1924517
Share on other sites

well, depends on the darkness i reckon, as with earlier commodores like vl's they have bright as orange lights on the executives and darker tinted looking lights on the calais, and they get away with it.

i think mums taxi's ones are abit too dark and cops would not pass it im 99.9% sure. the lights dont even look visable if lite up.

maybe a more sutle (sp?) look with only a few coats and still not totally black might be abit safer against potential police hassles.

i got a funny feeling almost every stagea on here will have tinted taillights after seeing the pics  :lol:  people will begin to think its standard fitment on series 1's and series 2 have the clear lights haha

hahaha True that. Well I'm thinking of just doing some light coats...

Wouldnt want them to be too dark on a black car now would we :(

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1924528
Share on other sites

well, depends on the darkness i reckon, as with earlier commodores like vl's they have bright as orange lights on the executives and darker tinted looking lights on the calais, and they get away with it.

production cars are always going to get away with a defect that comes standard, although your probably right in saying that if you put a light coat on then you may possibly get away with it.

i still call it "defect in a can", but it does make a car look great.

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1925246
Share on other sites

yea stops em from goin dull.

pretty easy to do when you think bout, saves sum money too.

yea of course it's illegal if you've got em that black you can't see any colour at all.

but if you look closely at my pic you can still see that there is colour behind it.

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1939044
Share on other sites

post-25826-1139569678.jpg

here's the pic I said I would post up with the lights on at night.

i've actually been flagged in by the police 3 times for random breath tests and they haven't even noticed the tail lights.

i don't think they know any different.

not that many stageas around here.

Link to comment
https://www.sau.com.au/forums/topic/104463-rear-taillights/#findComment-1940403
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
×
×
  • Create New...