Jump to content
SAU Community

White Face Dials R32,r32(1)r33(2)r34


Recommended Posts

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

Mate,

The R34GTT link is for the GTR. and on the site i couldnt find any for a GTT

Yes i just had a look my self.Ill get mike to ask them to make sure they make the R34 GTT white dials.

Thanks mate :D

I have had a few PMs about the LEDs! I can get them from cyberstork, alto you can get them from autobarn, super cheap, Auto pro... any good car shop should stock wedge led converted lights!

I made mine my self with leds from an electronics shop... I just god another 8 of them today. I have made a set of LED M3 style side mirrors! using the stock mirrors.... love em. cant beat the fold away deal they have. anyway i used hi powered 16,000mcd LEds in white, super orange, and sunset red. lol

Will post some pics soon.

HAHAHAHAH back to the subject

All up its your call about getting leds made by a shop, or having a go ya self.

I can make the same thing they sell! HMMMM maybe i can sell my own. lol

Can someone who has a dash out, tell me how many Big globs are in it...?

I would say mabe 5 all up for the dials.

I know it would be ALOT cheaper to get me to make them or have a go ya self with the leds... all up to you...

I just hooked up one f the side mirrors leds. OMG im blind... NO I AM!!!

on the kitchen table the are so bright i makes a big bright linght on the roof!

This is them...

P2112148.jpg

The leds are So much brighter than this, i see black spots now...

P2112156.jpg

OK BACK TO WORK..... LETS get some more orders please...

post-14512-1139576781.jpg

post-14512-1139576855.jpg

Mate,

The R34GTT link is for the GTR. and on the site i couldnt find any for a GTT

AcoustiK, can you email me a pic of your cluster, and I will check.

Your model may just not be listed so, please send me an actually picture and

I will have a look.

my email addy is [email protected]

cheers

So its $110 for the white backing and $120 with blue number as well

if so I'd like a set for an R32 GTR with the blue numbers please :rolleyes:

no mate, its just the $110 for the lot! you can have white with blue numbers or White with RED number bro... its only if you change the white background to another colour is a fee ;)

PM me with your order mate

Have the prices been rectified in regards to white dials yet?

As stated, I've budgeted $120 including my own logo and having the cyberstork one removed.

Hey skyliner, I mentioned it to Shan (funkymonkey) but unless there are more people getting the exact same meter design as what you want, its impossible to do it for $120, unless I pay the difference out of my own pocket. :D

If I knew ya like a mate, then maybe I'd pay it for ya :( but I havent even done that for Kezza yet, sorry Kez! LOL

Have the prices been rectified in regards to white dials yet?

As stated, I've budgeted $120 including my own logo and having the cyberstork one removed.

$130 is the lowest I can go, assuming there are at least 6 others on SAU who go into this buy.

I first need to see a pic of the personalize logo before I can promise that price.

send to [email protected]

cheers.

Hey skyliner, I mentioned it to Shan (funkymonkey) but unless there are more people getting the exact same meter design as what you want, its impossible to do it for $120, unless I pay the difference out of my own pocket.  :D

If I knew ya like a mate, then maybe I'd pay it for ya  :(  but I havent even done that for Kezza yet, sorry Kez! LOL

hoyyyy... tish tish.... you said i was ya best mate :D

Hey skyliner, I mentioned it to Shan (funkymonkey) but unless there are more people getting the exact same meter design as what you want, its impossible to do it for $120, unless I pay the difference out of my own pocket.  :D

Agreed, cyberstork won't give a discount that big to offset the cost unless there's about 20 people or so buying the exact same face (ie model and colour combo etc).

ok since you guys are desperate for number add me to the list for a standard white with blue number as well.

When do you want payment and when should I expect delivery?

i have had no one tell me if money has ben deposited inot my account as of yet?

MAKE SURE WHEN YOU DO< LEAVE A NOTE OF WHO THE PAYER IS...

SAU NAME. EG 9krpm

Not hard to do.... i would like to see 10 or more p[eople get in on this....

We have untill the end of this month!

Then i will send them all out!

please send a pm with your order!, and a pm once you have made transfer!

thanks

mass iv's post from funky's old thread makes it seem like more than $110 worth of work getting these things in and with teh correct lighting. Is it possible to remove the old black ones to install the white ones?

It would be better to not have to change the lights so you can actually read the dash...

mass iv's post from funky's old thread makes it seem like more than $110 worth of work getting these things in and with teh correct lighting. Is it possible to remove the old black ones to install the white ones?

It would be better to not have to change the lights so you can actually read the dash...

Still haven't yet seen those pic's from your mates r33 skyline that has them installed.

Ok... no need to remove the old dials, AT ALL! the white faces slip over the top of them, not a hard job todo at all!

The only reason they change to led lighting is so you can get crisp sharp colours. for thoes who are into changing stuff, also they can be brighter in some cases, pending on how good ya original lights are.

Like i wanted my needle to light up bright blue, so i fitted a Blue led. .

Like i said its all up to the person, they light up nice just normal. i will get my mate to come around now to take some pics of stock.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
×
×
  • Create New...