Jump to content
SAU Community

---power Fc And Control With Uas Tune 230 Rwkw---

rx-[7]
 Share

Recommended Posts

rx-[7] Community Regular

rx-[7]

Posted
Posted (edited)

I have a Power FC and hand controller to suit R32 and R33 GTR. Located in Kellyville Sydney

The Power FC was tuned by Ben at Unique Auto Sports and produced 230 kw at the rear wheels on Premium Unleaded at a very safe tune with solid A/F ratios. And i have the Dyno sheet to prove it.

The car ran 14psi boost (boost restrictor cut out) and only mods were a 3inch cat back exhaust and pod filters.

UAS charges $590 power fc tune, which includes "part throttle, cold start and final road tune using Pro Tuner, knock sensor and Bosch Air Fuel Ratio meter and includes setting boost or multiple boost settings"

UAS DYNO PRICEING

So if you have similar mods this is PERFECT FOR YOU, and can save you $590 Which is about 45% of the total cost of buy and tuning

I also fitted the backing plate from a stock ECU to the Power FC so you can actually bolt it in the stock location, normally they just float around in the kick pannel sometimes getting damaged. But dont worry it still has the power fc front cover to show it off.

I want $1000 firm.

I know some people can get them brand new for about the same money, but if you dont get a brand new one tuned you can blow your motor (and loose power and responce) So your saving about 45% Which is a bloody good discount for an item which is BETTER then new almost every way!!!!!

PLEASE read these and it might make you think twice about buying a new one and driving around without getting it tuned... it could cost you a rebuild.

About UAS quality of tune before and after with a PFC

http://www.skylinesaustralia.com/forums/in...=110666&hl=

This is about dirving around and standard PFC tune

http://www.skylinesaustralia.com/forums/in...=118777&hl=

This one is all about the PFC and all is functions, and about driving around without getting a tune

http://members.dodo.com.au/paul/docs/power...erfc-faq.htm#24

Call Jake 0404080448 or pm or email [email protected]

Edited by rx-[7]
PranK Grand Master

PranK

Posted
Posted
The car ran 14psi boost (boost restrictor cut out) and only mods were a 3inch cat back exhaust and pod filters.

Cmon cefiroboy, read the post...

  • 1 month later...
  • 2 weeks later...
  • 3 months later...
rx-[7] Community Regular

rx-[7]

Posted
  • Author
Posted

Still for sale!!! some one must want a plug in computer with a great tune already to go with out putting your own engine and car through all the risk and stress of getting it tuned!!!! Plug in and GO.... How about this if your local I will even install it for you for free!!!!!

JSL Collaborator

JSL

Posted
Posted
' date='29 Jul 2006, 03:46 PM' post='2366918']

Still for sale!!! some one must want a plug in computer with a great tune already to go with out putting your own engine and car through all the risk and stress of getting it tuned!!!! Plug in and GO.... How about this if your local I will even install it for you for free!!!!!

Still firm on 1k?

If you holding it that price because of the UAS tune.. well I dont want UAS maps... you can get them to put it back to factory Apexi maps and ill make an offer.. PM me let me know..

rx-[7] Community Regular

rx-[7]

Posted
  • Author
Posted (edited)
Still firm on 1k?

If you holding it that price because of the UAS tune.. well I dont want UAS maps... you can get them to put it back to factory Apexi maps and ill make an offer.. PM me let me know..

Yes you can reset them back to original maps no problem, but i dont know why any one would want to as they are not safe its like just buying a new pfc and plugging it in, the reason there is mapping that comes pre installed is so you can plug it in and drive it to get tuned (and so there is a decent base map) The UAS tune is on the VERY safe side of things, and makes loads more power then the original maps.

Read this and it might change your mind....

About UAS quality of tune before and after with a PFC

http://www.skylinesaustralia.com/forums/in...=110666&hl=

This is about dirving around and standard PFC tune

http://www.skylinesaustralia.com/forums/in...=118777&hl=

This one is all about the PFC and all is functions, and about driving around without getting a tune

http://members.dodo.com.au/paul/docs/power...erfc-faq.htm#24

Edited by rx-[7]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...