Jump to content
SAU Community

Recaro Style Reclining Race Seats - $399 Per Pair!

Just Jap Racing

By Just Jap Racing,
in For Sale (Business Traders)

 Share

Recommended Posts

Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted
just out of curiosity is it possibleto get the seat rails seperatly and if so how much????

Cheers Jimmi

Hi Jimmi, the included universal seat rails only come with the seats.

Regards,

Steve

  • 1 month later...
Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted

Hi Paul, this offer is still available :blush:

We don't actually offer pre-made rails unfortuantely, but most reputable workshops/fabricators should be able to modify the rails to suit your vehicle.

Cheers,

Steve

Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted
are they only available in leather? or can they still be had in fabric...

Hi mate, thanks for your enquiry.

We have both Leather and Mesh Fabric types available.

Cheers,

Steve

GReddy_ES8 Explorer

GReddy_ES8

Posted
Posted
2. All black

blackleathrecarotype.jpg

The above seats are available for online purchase right now via our website using the URL below:

http://www.justjap.com/parts_nseats.htm

Cheers,

Steve

hi Steve..

when's the offer on till?i'll only be getting my car end of next week..but am tempted to get a pair of these black leather ones :)

Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted
hi Steve..

when's the offer on till?i'll only be getting my car end of next week..but am tempted to get a pair of these black leather ones :D

Hi mate, we will be continuing these prices for a while so don't worry - Pm me or drop by the store when you are ready to go and we will look after you.

Cheers,

Steve

Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted
Hi do you have a recommended place to get the rails done and a rough price figure?.. rails is the only thing stopping me from buying these seats!

Hi Aarlan, you could try Grey Imports.

Regards,

Steve

GReddy_ES8 Explorer

GReddy_ES8

Posted
Posted (edited)
Hi mate, we will be continuing these prices for a while so don't worry - Pm me or drop by the store when you are ready to go and we will look after you.

Cheers,

Steve

thanks Steve..will let u know :)

Edited by GReddy_ES8
R31 drift pig Experienced

R31 drift pig

Posted
Posted

Hi Steve,

Purchased a few things off you on NS.com...

Was wondering actually what these are like to drive in?

Im tossing up whether to use these or a fixed seat, my car isnt a full time drifter, but sees some occasional slide time.

Not too worried about mounting them, thats easy enough, just wondering what they'll hold me like? Are the sides and leg bolsters firm like Genuine recaros?

Cheers,

Ben.

Just Jap Racing Grand Master

Just Jap Racing

Posted
  • Author
Posted
Hi Steve,

Purchased a few things off you on NS.com...

Was wondering actually what these are like to drive in?

Im tossing up whether to use these or a fixed seat, my car isnt a full time drifter, but sees some occasional slide time.

Not too worried about mounting them, thats easy enough, just wondering what they'll hold me like? Are the sides and leg bolsters firm like Genuine recaros?

Cheers,

Ben.

Hi Ben, the feedback we receive from our customers is that these are very comfortable to drive in. The design and support is virtually identical to the Recaro SR3 recliners so for a streeter with the occasional drift outing I would be going for a pair of these rather than a set of fixed back seats :thumbsup:

If you have any further questions please don't hesitate to ask

Cheers,

Steve

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      2001 R34DE

      By PranK · Posted

      R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...