Jump to content
SAU Community

Recommended Posts

Hey guys

My car has been playing up for a couple of days now, took it for a service to Adam's Auto Centre at Woodcroft. Service and inspection $423, oil,filters,plugs and tune. Scantool says its the afm :P

Just wondering if there is still a group buy for this? I know Cubes you were doing 1?

Anyone got a spare 1 lying around so I could buy/borrow it for the cruise? Cant get a hold of 1 until next week?? :P

Link to comment
https://www.sau.com.au/forums/topic/106235-afm-is-on-the-blink/
Share on other sites

YO - I got one

a standard Rb25 unit, I put in a Z32 item recently

Im in Morphett Vale.......

email me if ya need.

Does the rb25 slot straight into rb20 type?

if so, how much you want for it? i'm in woodcroft!

Does the rb25 slot straight into rb20 type?

if so, how much you want for it?  i'm in woodcroft!

Thats something Im not sure about, at all... sorry.

To be honest, Id rather not 'sell' the unit in case I ever get defected for my Z32 unit. Im hoarding my spare parts for "just in case". But more than welcome to 'borrow' it mate, to help you out for a few weeks, no problems there.

If the RB25 unit fits, then so would a Z32 afm? That being said, the Z32 is obviously the best choice for further tuning mods, I was near maxing out my RB25afm at only 140Awkw (was 4.95V, max is 5.15V?).

The Z32 afm lets you tune the beast just that little bit more lol! Now Im safely at 160Awkw with plenty of scope for more tuning when I (can afford to!) add on the hiflow turb'.

Maybe send an email about RB20's running a Rb25/Z32 afm, to Sydneykid, Cubes, Paul33, or R31Nismoid, or someone who knows their stuff?

Checked out the RB20 turbo sticky thread (ie dynographs etc) in the forced induction area - to get good power they're all using Z32 AFMs, or a VQ45 afm.

So if you want to borrow my RB25 unit, no worries, but better off purchasing a Z32 unit in the future....... plus a massive twin turbo setup, etc etc lol!

hey how much do you want for the Z32's and clips im very keen

I've been told that I probably can sell them for $300 each as these comes with harness and flanges for easy bolt on.

For you I can do $250 each pickup.

Let me know, they just came off the car yesterday. Car had 380rwkw and idled well with these on so there is defitely no problem at all ....or money back.

They are at Willall racing atm. I'll be there after 1pm today. So let me know before they collect dust.

hey adam, my r32gtr was playing up since last sat[11 feb] and i took it in to steve at manta racing on thursday[16feb] he and peter worked on it {retune} cleaned the sensor in the afm which unfortunately didnt work {might for you} and found that he could only get one from sydney. It got here friday and after another quick tune had me on the road again by firday afternoon. great guy{steve} and doesnt cost the earth in labour. look him up in the pages. what better than having a guy{steve} that tunes bently turbos etc and peter hall {had a lambo and gt3 porshe waiting for service} working on your car for a good price! lots of other workshops charge the earth when they hear GTR!!

Yeah thanks bwilkeson for the lend of your afm! Greatly appreciated, mine didn't start playing up until I was 2 streets away from home after the cruise. I think I will try to hook yours up until I can get (afford) one. I cleaned mine about 3 days ago and no problems until today, I guess its a short term solution. ;)

I paid $250 for my Z32 afm, so thats definately the going rate.... well worth the dollars, unless youve got ~$450 to spend on a new item.

$450 each was what my car previous owner paid for his z32 as well. He paid extra for the adaptors/flanges. I could not throw in the harness because Peter Hall left that on my car.

The first $450 offer will have both my Z32 and 2 adaptors.

Edited by 9krpm
Yeah thanks bwilkeson for the lend of your afm! Greatly appreciated, mine didn't start playing up until I was 2 streets away from home after the cruise. I think I will try to hook yours up until I can get (afford) one. I cleaned mine about 3 days ago and no problems until today, I guess its a short term solution. :)

My pleasure.

Well done on the organisation of the cruise, you did an awesome job (with help from other SAU forum users).

  • 2 weeks later...
Tangles. There is no obvious way you'd be defected for a Z32 AFM. Most coppers wouldn't know what an AFM is. ;)

The colours are different.... Z32 is 'pink' and Rb25 is 'green', if theyve defected ppl before, then they'll know what they are looking for. But it aint just the afm, its all the ecu add-ons etc Ive got that are pretty easy to spot, so if I ever need to go to Regency I might as well hoard my spares. Not all oinkers are dumbarses. :/

Edited by Tangles
My Z32 has a Orange Sticker!

I think thats right - I was guessing.. pink/orange, just a matter of interpretation really (plus I'll just say I was clourblinded the last time I looked at it - must have been the wife mucking around again)

R33 S1 afm's (green sticker 4pin) are the same as the r32 rb20det afm.

R33 S1 afm's (pink sticker 3pin) obviously don't plug in. :)

Z32's as stated are orange, I'm waiting for bosch, they said they will have the numbers I require by may due to an problems they had with manufacturing that threw backorders through the roof.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...