Jump to content
SAU Community

Recommended Posts

My work laptop (this one I'm on now) randomally without warning does weird shit where the screen goes either black or pink and I lose whatever I might have been working on. Have to force off and reboot and then it works again.

help desk just had my reseat the RAM. still no worky. see what they come up with next.

SO, i connected a secondary screen and ran Primary Hard Disk Self Test, results are "#2 - 07 Fail". HP tells me i need to purchase a new hard drive. I dont see how that affects my display tho?

Can you access anything on the drive, I'm assuming you can because you ran the disk test? With the second screen plugged in can you access Windows or is it not booting from the drive at all?

If so I'd get any or all data off of it while you still can.

Ok so i managed to ferry files from my laptop to work pc via USB. Looking at HDD's, Western Digital 2.5" 250G, $88 from MSY. is this what i need?

yeah but make sure you get the right one (IDE or SATA)

If you're going for a new HDD, get one with high rpm (7200 minimum) you'll notice a huge performance gain on the 5200 rpm drives. Get a Solid state drive if you can afford it. They have the best performance but they are rather expensive unfortunately...

-D

EDIT - I still cant fathom why a hard drive fault would cause your screen to stop working... I smell shenanigans

Edited by Dohmar

RE: your Edit: thats what i was thinking, i asked this from HP help, and they said the OS might control the video... pretty open ended answer. My comp still seems to work fine, maybe ill run Preimary Disk check again to double check.

RE: your Edit: thats what i was thinking, i asked this from HP help, and they said the OS might control the video... pretty open ended answer. My comp still seems to work fine, maybe ill run Preimary Disk check again to double check.

thats bullshit

the BIOS controls the video until the operating systems driver overrides it. call them up again, cut sick and demand that you speak to someone who isnt incompetent

-D

i got this email back from them:

Hello Damien,

Thank you for contacting HP e-Solutions.

This e-mail is with reference to Service Incident id: 1953674 for Compaq Presario C554TU Notebook PC.

I understand that the display is very dim, but there is display on an external monitor. Also, the hard drive failed the test from BIOS with completion code 7.

The notebook needs to be repaired to resolve the issue. Our records show that the warranty of the notebook expired on 26 Apr 2008 and hence the service is chargeable.

Please provide the following details to setup a service event:.................

So i said:

Hello,

So all I need is a replacement Hard Disk Drive? Or is the screen a different issue?

Reply:

The issue with the dim display can be resolved only by replacing the display panel as there is display in external monitor, but very dim display on the notebook.

Please e-mail us the above requested information. We will be glad to further assist you.

Regards,

Vijayasarathy

Technical Support Engineer-HP e-Solutions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Give it 40psi and send it to the moon
    • I suspect 550s are on the large side for happy operation with a stock/Nistune RB20 ECU. The Hitachi ECU doesn't love short pulse width operation, and the RB20 doesn't need much fuel at idle. Big injectors can be unpleasant. This could be contributing.
    • Yeah, I still don't know why the idle speed control can't catch the falling RPMs. In the Consult logs I see the AAC duty cycle rising, but suddenly it goes lean and the engine stalls. Anyways, the relevance here is the DW 550cc injectors are probably the same. So if OP has similar issues I would be tempted to finger those injectors as problematic for whatever reason vs the ECU failing for some reason.
    • Yeah, sort of blurring two different things together, aren't we? I just meant O2 feedback closed loop. I used to have a 0-1V LCD meter on my dash, wired directly to the O2 sensor signal. So you could easily see what it was doing. Normal running it would flick back and forth nicely. Slow down to an idle and it would keep flicking, as the ECU tried to servo to maintain stoich, but it would slow down as each swing happened until it would stay at one end of the scale. As I said above, the sensor heater is not enough to keep it hot enough when there is also little heat in the exhaust flow. Give it a blip and it would start swinging again, then peter out again. Meanwhile, idle speed control would run just fine, because unrelated.
    • It's not even O2 feedback, it's just simply when the ECU sees the closed TPS signal for whatever reason the idle will start steadily dropping until the engine dies. With the TPS adjusted to not trigger closed TPS it will idle at some ridiculously high RPM and something like 6 degrees of timing. In the absence of getting eyes on it personally and a lot of quality time doing diagnostics I couldn't tell you what the real problem was but it was interesting nonetheless
×
×
  • Create New...