Jump to content
SAU Community

Recommended Posts

Hey Guys just wondering if anyone knows how to get to the driver side park light, Its easy to get to the head liaght them selves but the parks lights is another story.

Also has anyone had problems where they have replaced the bulb it and then a couple of days later it just blows again. Maybe there is a fuser somewhere the needs replacing or something

Any help would be appreciated. thanks.

Link to comment
https://www.sau.com.au/forums/topic/109035-front-driver-side-park-light/
Share on other sites

  • 2 weeks later...

heres what is even more f**ked!

I had my whole front end replaced after a moron reversed into it.

Went to roadworthy car to re registar and dickhead panal beater didnt have park lights wired up and i dont know who to do it

Anyone know?

I am that close to burning this 33 to the ground?!

  • 10 months later...
if its for an R33, its just a pain in the ass.

basically you need the hand wrist and arm of an anarexic 3 year old to squeeze into the little gap and turn the plug a 1/4 turn anti clockwise and it'll just pull out :)

Is that for the headlight where your turn the cap and it pulls out and then you twist the wire to pull out the globe? because i want to change the parker's light on the passenger side of my car but i cant seem to find where i can do that, i found the cable connecting to the parker's but nothing to access me to the parker's.

r33qw1.jpg

its really not that hard once you jam your hand in...you can see the white plugs that hold the parkers if you look down in the right spot. the passenger side 1 is easy as, and I can change it in about 10 seconds...the drivers side is more tight.. if you can be farked, un screw the washer bottle and move it aside to make the job easier

its really not that hard once you jam your hand in...you can see the white plugs that hold the parkers if you look down in the right spot. the passenger side 1 is easy as, and I can change it in about 10 seconds...the drivers side is more tight.. if you can be farked, un screw the washer bottle and move it aside to make the job easier

yer thats exactly wat i did, decided that i wanted the led blue ones, removing the passenger one is not too bad but for the drivers door i removed the washer bottle, be carefull with the plugs on it though because they may be brittle like mine were. otherwise a pair of long nose pliers with a cloth (to avoid damaging the plug) will reach the drivers side one i would think.

cheers, Jon

37382488pi8.jpg

71923431ee2.jpg

26090343ry9.jpg

23079033kt6.jpg

i tried to find the parker's on mine to change the passenger side one, i cant find it.

What do you mean you can't find it? those arrows are pointing right at it....

that black plug, plugs into the white plug, and the white plug twists out and holds the globe....

What do you mean you can't find it? those arrows are pointing right at it....

that black plug, plugs into the white plug, and the white plug twists out and holds the globe....

LoL, i tried to twist the bastard out but was cautious because i thought it was going to break, is there are certain way i need to twist like clockwise or somthing?

thanks for the advice dezz :happy:.

when standing facing the car, turn it a 1/4 turn clockwise I think...dont quote me coz I can never remember until i'm actually doing it, but it will only go 1 way, just dont try to force it in case you're turning it the wrong way, if it doesn't move, then go the other way :)

when standing facing the car, turn it a 1/4 turn clockwise I think...dont quote me coz I can never remember until i'm actually doing it, but it will only go 1 way, just dont try to force it in case you're turning it the wrong way, if it doesn't move, then go the other way :/

thanks alot dezz, parker is fixed, i owe you a beer if the oppurtunity ever arise's, thanks heaps champ.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...