Jump to content
SAU Community

Recommended Posts

Evening/morning all,

long time reader and first time member/post. i am what seems like eternity but is only a few months away from purchasing a car i can now afford after 15years. i have a yard whom imports them often and has a few dreams about his pricing now and again but he really does get some nice cars and some bunkers. recenlty looking through his yard i noticed not alot of them were complied and infact some had doorskins missing but was later expalined as to be being preapred for the intruion bars. anyway i noticed a disturbing trend inmost of these cars as the weather seal and strips were almost nonexistent. alarm bells ringing and all it looked like you had to remove and replace these seals not only the front but back window seals also. 15 years is 15 years but some were almost gone and some were still good but i noticed it was the most thing that stuck out in all of them. the door seals and strips on the outside were perished in alot of them too. do any you members have any such issues when buying or after buying your car with the seals? they hard to replace? you need a new screen? i am panicking over nothing? its just i know after a while if left unattended they will eventually leak water into the A pillar and it goes pear shaped from there. who knows if water has come in and started rusting? any and all advice is appreciated in advance.

Regards,

T

Simple mate: There are a lot of other cars in better condition..

My car is 10 years old, and the seals are in perfect condition, with no cracks at all..

You just gotta be picky and find another car..

But if you were to replace the seals, it wouldnt cost that much, if u just get a local guy to do it..

So what car are you lookin at?? What you mean, i can now afford after 15years??

If its a doddy yard, and you dont feel comformtable, isnt it a simple answer.. try somewhere else??

Yup, or if you sydney, go to www.sspi.com.au

Its a compliance shop, and does most of the complicance anyways from most of the online importers.. you can buy a car direct from them.. Thats what i did.. No dramas at all..

Cheers..

Hi and thanks for the advice,

after 15 years because 15 years ago they cost 100-120,000 bucks new in australia...if you could get one!

i have an onroad budget of 23000 absolute max and onroad i mean with insurance at around 900 a year for my age. also being married you have to have a budget that you both agree on and stick to. if id ont agree/adhere to the budget i simply cant get the car.simple. a few months to go and i may even have to go east to pick one up as they are thin on the ground in perth. i figure it is that way because we dont even have any comliancers for R32s here...YET! we get some slim pickngs or have to be buy sight unseen and pot luck it from importers. granted sometimes your luck is good but of all things i hate to put buying a car down to pure luck...and indeed it is. i figure there are some cars in the east for prices around the high teens early twenties then i factor airfair and accomodation then the car carrier back i may get something decent.

the guys here wants mid to low 20s for some of his ones and i must say they leave a bit to be desired, like big scratches on metallic paintwork, spot rusts near the reaer wing and weathered and hardened interior trims. i have almost convinced myself not to buy one when i went looking for a whole weekend but the redeeming point was that the wife suggest i look interstate.

pointers anyone? which states best price easy transport?

thanks again,

T

Take this advice from me.. When you buying cars such as skylines, and you have a strict budget to ammend to, always budget another 1k on top for various things that will pop up n you wont realise it..

so save another 3-4 k i say, and purchase one in better cond..

or get a really nice s2 r33... that will perfectly fit with your budget...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...