Jump to content
SAU Community

Recommended Posts

Ive got a R32 GTR and ive taken out the ristrictor in the hose that goes to the boost controller solaniod but i was also told to join those 2 hoses together to get 15psi.. It works BUT like at 6000rpm its sometimes starts to make a limiter noise. could some one help me because my car is GOIN NUTS ON 15PSI :O

I was only running about 8-9psi before but now that little bit extra is awesome.

DO GTRS have a boost cut defender?

ANYONE?

Im only new to the forum so this is a pic of my car.

post-26787-1143156584.jpg

explain exactly what happens at this 6000rpm mark.

does it cut the power completely.. like is it violent?

is it like a rev limiter where it stutters and kinda back fires?

doest it keep reving up but kinda misses?

what happens to the boost gauge when this "CUT" happens? still sit at 15 or drop?

with more description and those answered, people can give you a better response as to what the problem is.

at the moment it could be..

AFM max

spark blowing out due to excess boost.

coil packs arc'ing out

etc...

I think that the fact that you now have about 2 x the boost you had before, you are blowing out the spark.

there are a few things you can try which will cost you nothing but some of your time.

1.) take out your spark plugs and gap them down to 0.8mm.

if they already are, drop them back to 0.7mm.

2.) with some electrical tape, tape up the coil packs. there is a guide on this in the maintenance section of these forums.

I did the above 2 points 2 weeks ago and my car revs out smoothly now.

mine is an rb20 but same edal.

runs a little more boost than stock.

I suggest you try the 2 things above as they are free and MAY fix the issue.

If you are in Sydney, I can help you do it if you like.

if they are anything like GTST's then yes they do.

Write it out 20 times..........

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

Half way there……………

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

Hope you learnt a lesson, next time it will be detention for you

:O cheers :P

if you are running 15psi and stock ecu you will be encountering the STOCK EXCESS AIRFLOW protection. turn the boost down and try again, i would suggest around 10psi at the most. this should work around the excess airflow protection

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Just a thought, was that car and auto at any point of its life? If so, maybe whoever bridged the inhibitor switch/circuit did a not so good job.
    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
×
×
  • Create New...