Jump to content
SAU Community

Recommended Posts

beat my PB tonight with a 10.907 @ 129mph. did it on my last run of the night which was good so i still got 3 runs in before that

Yeah, I was watching it from the barrier next to the start line (mate was racing his bike). Very impressive mate :) Certainly sounds great... nice bangs on rev limiter hehe

Edited by TommO

cheers :) I'll be back next friday the 1st feb to have another go. dont want to do another 10 straight up though, want to get my moneys worth. I still havent bought a super street licence yet and ive done under 12's the last 4 times ive raced lol

Well done on the 10.9 :) Car looked good and goes even better. Garrett 2860-5's?

There was also a white R32 GTR with QLD plates that ran a 10.4@134 (I was told it ran 10.1 earlier).

thanx mate, nah im running hks 2530's. yeah i saw that white one do the 10.4 heard it's a TRP car Did that car have a cage?

Edited by OFENSV
pb of 13.67 @ 100mph last feb fastest run of 104mph, need more practice :P

sorry forgot to say was in a r33 gtst, cooler, turbo back exhaust, pod, apexi power fc makin 190rwkw on 12psi, pingin its head off, needing a retune, have been back since ran a 13.71 @104mph detuned to 180rwkw, waiting for more funds to upgrade turbo and fuel system, i want 300 rwkw with a 35r 700/800cc injectors, big fuel pump surge tank etc, give me 12 moths or so hahaha, i cant wait i wish i had thew coin now!!!! hopin for 12s, 11s would be beter!!!!!! hahaha ill update my progress :ermm:

  • 3 weeks later...

11.7 @ 122mph, 1.8 60ft.

I've gained 5mph, but only 0.1 on the ET.... traction has become a real problem lol. I managed to nail a 1.6 in one run but unfortunately shifted into 2nd a bit too early. Ended up witrh a 11.7 @ 117mph that run... dammit, that would have been my 11.5 :)

Edited by TommO
beat my PB tonight with a 10.907 @ 129mph. did it on my last run of the night which was good so i still got 3 runs in before that

Congrats Mate!! Awsome stuff!!!! :) Make them update the thread!!, you deserve the recognition. You are driving it spot on ;) And am enjoying your progress.

Congrats Mate!! Awsome stuff!!!! :) Make them update the thread!!, you deserve the recognition. You are driving it spot on ;) And am enjoying your progress.

Thanks dude :P, Yeah im not sure if he still updates this thread, think its been awhile.

Thanks dude :) , Yeah im not sure if he still updates this thread, think its been awhile.

When are you running next? Ill have to get the 34 down there and see if i can run i 15sec QTR haha... I'd be lucky to run that the way the clutch is at the moment :)

When are you running next? Ill have to get the 34 down there and see if i can run i 15sec QTR haha... I'd be lucky to run that the way the clutch is at the moment :)

hey mat, you have a new name thing.

I was ment to be going to a private day with V8 owners club but had to pull out due to lack of money. not working doesnt help haha

hey mat, you have a new name thing.

I was ment to be going to a private day with V8 owners club but had to pull out due to lack of money. not working doesnt help haha

Yeah, i figured 32GeeTeeR was a little innapropriate considering i drive a 34GTT :laughing-smiley-014:

Get a job ya bum... So i can watch you run the 1/4... Once i do clutch and injectors ill have a crack...

Anybody know what a mild 34 is supposed to run?

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...