Jump to content
SAU Community

Car Starting Problems...help Needed

EGA41T

By EGA41T,
in Four Door Family & Wagoneers

 Share

Recommended Posts

EGA41T Mentor

EGA41T

Posted
Posted

i have a stagea with an r34 rb25det

after the ecu was disconnected, then reconnected, the car wont start. the engine is cranking but there is no spark. the fuel is there. just that the coil packs do not operate when i crank the engine.

any ideas guys?

an anti theft system of some sort? im stumped.

Link to comment
https://www.sau.com.au/forums/topic/111314-car-starting-problemshelp-needed/
Share on other sites
AlexCim Grand Master

AlexCim

Posted
Posted

try actually pushing the plug in harder

i found once i didnt put the plug back well and the 4wd/abs/etc wasnt working. Could be an easy fix?

Otherwise, not sure what fuses there are for the coilpacks.

Maybe some fool disconnected the coil packs? The connector is at the end of the rocker covers near the fire wall.

EGA41T Mentor

EGA41T

Posted
  • Author
Posted

the coil packs have power, just dont have power when i try to crank it :happy:

i'll try pushing the plug in harder but im pretty sure its in securely.

i need to get the car fixed by 9am tomorrow morning if im to make it to the "Vehicle Identification Inspection"

otherwise i'll have to rebook it and wait another week before it gets on the road. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...