Jump to content
SAU Community

Recommended Posts

Hi Guys

Theres only a few kits left from a previous group buy from people that didnt end up purchasing them, so first in first served.

They were for a group buy for people that own cefiro's and the earlier model R32 Skylines whose low beam bulbs are the H3C type. These H3 HID kits will fit and focus perfectly to your H3C housings, as its only the rear connections that are actually different on H3 and H3C halogen bulbs. Those that own these cars know how bad their current light output is, so it is highly recommended to get one of these kits.

The price is at the now reduced $350 delivered. These quality kits are made in Korea and are NOT the cheaper Chinese or Taiwanese HID kits available from other sellers on the net. There is a 1 year warranty on the kit.

I have some photos and information on my website www.bosimporting.com.au which should clear up most of the questions you may have about HID. A quick link to the photos is found here:

http://home.exetel.com.au/nismo/newhidpicsvid.htm

cheers,

Michael

  • 3 weeks later...

hi ben

the r33 has H1 bulbs in the low beam. because the r33 has seperate bulbs for low beam and high beam, the hid kit will only go in the low beams. you can get another h1 hid kit for your high beams but almost no one does this as you hardly would use high beam when you have hid in the low beams. only cars with h4 bulbs would need to get the hi/low beam hid kits otherwise they wont have high beam at all.

i am currently running a group buy for hid's in another forum, as i dont have any left atm, and it is ending this friday. if you would like a H1 HID kit, let me know what colour you want e.g. 6000K and if you make payment by this firday you will be part of the group buy and i will send you the kit sometime next week when i receive them. the price is $340 delivered through this group buy. PM me if you want to be in along with your address. my account details are below:

name: Bos Importing

BSB: 062189

a/c: 10139185

Bank: Commonwealth Bank

cheers

  • 1 month later...
  • 3 weeks later...

no H3 HID kits left, sorry mate.

The r32's are the worst with halogen lights, hid kits are a must on these cars, especially if you dont drive on areas with well lit roads...

  • 2 weeks later...

you need a H1 kit, but it will be hard to get the bulb to sit into its place because you cant have the adaptor there which would normally keep the bulb into place. Instead you would have to fit it in by making something that will hold it into place. ive had the same issue for my r32, so i got some metal wire and coiled it, then used this to press it against the h1 hid bulb and secure it into the headlight by putting the coiled wire between the gaps where the adaptor would also secure itself to.. the colours i have are mostly 6000K, but sometimes i get 8500K or 6500K if people request them. i dont have any H1 kits left at the moment though.



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...