Jump to content
SAU Community

Recommended Posts

hi,

as topic states.

Came out of my Cefiro as I did a manual conversion. Worked perfectly till the day it was taken out. No unusual noises, knocking or slipping gears.

Comes with drive plate and auto box complete.

Located in South Eastern Suburbs of Melbourne.

$150.00ono

thanks

Link to comment
https://www.sau.com.au/forums/topic/114295-rb20det-automatic-transmission/
Share on other sites

hi,

as topic states.

Came out of my Cefiro as I did a manual conversion. Worked perfectly till the day it was taken out. No unusual noises, knocking or slipping gears.

Comes with drive plate and auto box complete.

Located in South Eastern Suburbs of Melbourne.

$150.00ono

thanks

Excuse my ignorance about the technicalities of this auto

I gather its a 4 speed out of a turbo skyline

I have a rb30 motor I an putting in a Bedford van and because of the extra weight

have been told a turbo box being stronger would be better

does this box bolt straight up to the rb30 motor

also is the convertor made for higher revs so I would have to replace it with a non turbo configeration

If you can answer these questions it would be much apprectiated

finally I live in Adelaide so freight would be involved so bo you have any idea of dimensions

and weight of crated item and even better approx freight costs

thanks Crowsss

auto skyline boxes have a torkconvertor thats pretty low

only a stall of 2000rpm

and yeah it will fit upto a rb30 no probs

theres your answer I guess.

dimensions and weight im not too sure. i can measure it but weight....your guess would be as good as mine.

for a courier thats cheap try VICFAST.

thanks

Edited by gHeTTo_GiRL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...