Jump to content
SAU Community

1988 A31 Nissan Cefiro


Recommended Posts

1988 NISSAN A31 CEFIRO

Odometer: 555,558km - pretty sure its broken although it is a taxi !

Interior/exterior

· White

· Black BR sports light weight rims

· Black tinted windows

· Grey & black interior. Excellent conditon

· Body very staright – great paint for age

· VDO headunit – 6” and 6*9” speakers

· Apexi pen TT – AFR, Volt, Temp

· Greddy electronic Boost guage (optional)

· Cyclops 2 stage alarm, remote keyless entry

· Full electrics

· New AC gas (optional)

· Sports steering wheel

· Front bar

Stop/turn

· New R33 DBA slotted rotors, r32gts-t calipers, EBC greens pads,

ADR approved custom stainless steel braided brake lines

· Reconditioned brake master cylinder

. New clutch slave cylinder

· Tanabe sustec rears, Bilstien Fronts. perfect condition

· Adjustable steel castor rods

· New Tyres 15”

· Nolathane rear subframe bushes (pineapples)

Go

· RB25 with 47000km – fresh engine

· Turbo Back Exhaust, 3.5" dump, highflow cat and twin 3” Trust cannons w/ removable baffles

· Hybrid 100mm wide FMIC

· Custom stainless piping

· Relocated oil filler cap on custom rocker covers

· 4” K&N pod airfilter

· High mount T4 manifold w/ 50mm external wastegate and screamer pipe

· 600hp T70 turbo

· Z32 afm in cooler piping

· 460cc GTI-R injectors cleaned and flow tested

· Brand new GTR resistor pack

· 600hp Nippon Denso fuel pump

· DR_DRIFT ECU remap

· EXEDY 2750lb 5 paddle HD Button clutch w/ new flywheel

· 'so far so good' RB20 g/box

· 1.5 way mech. Diff ? spins both wheels, and loves the power

Full service, brake, clutch, engine, g/box and power steering oils and fluids replaced.

New plugs and filters. Full dyno tune for conservative power and fuel efficiency.

Currently running 14psi safely and making 225rwkw and 650rwnm of torque!!.

!! = LS1 5.7lt V8 makes 530nm and xr6T typhoon 550nm at the engine!!

Has been on dyno at 250rwkw and 750nm at the wheels @17psi.

The cruisiest car I have driven, plenty of torque and power off boost. Full boost at 4200rpm @ 17psi and 4400rpm at 14psi.

The reason I run 14psi is that I have put the removable baffles in and this alone drops the boost from 17 –

14 and hence the decrease in power. However this is as quite as a stock exhaust r33 skyline

This is 48% EOI, i fi dont sell it for my asking price i am keeping it as it is so addictive to drive. As we speak

i am planning a methanol injection system for the rb25de, probably go down the road of a 'haul arse race car'. This way more boost more power and lower intake/combustion temps.

few things left to do for the asking price.

Change oil and plugs and filters (these were done 1800km ago, but will get it all fresh)

final tune on united boost 98 - ethanol will allow a more advanced tune and if anything still be a bit safer.

currently has no boost guage - as this car is not a turbo !! but you can have one if you really want

AC GAS - just need a new reciever dryer and some

the usual no time wasters stuff applies. i can take genuine interests for a drive but you will not get a drive

until you have put down your 10% deposit !!

YES THIS CAR IS COMPLIED

this car is registered with the RB25 in it, it is registered until end of August. It will come with RWC but we will

have to swap all the exhaust, turbo, manifold etc. "ALL OF WHICH I HAVE AND IS INCLUDED"

MY ASKING PRICE : $20,000 including RWC AND REG - genuine buyers will know how much all of this costs

and understand how i have spent over $15,000 on top of the cost of the car on the road.

NEW PRICE : $18000. as is, not including RWC. the car passed one 6 months ago, all that needs to be done is to swap all the turbo, zorst and manifold to stock items. These items are included in the price of the car.

PICS - http://www.skylinesaustralia.com/forums/in...opic=109643&hl=

MORE PICS - EMAIL OR PM

Shaun

post-2503-1146462005.jpg post-2503-1146462585.jpg

Edited by shaunr32
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...