Jump to content
SAU Community

Recommended Posts

1988 NISSAN A31 CEFIRO

Odometer: 555,558km - pretty sure its broken although it is a taxi !

Interior/exterior

· White

· Black BR sports light weight rims

· Black tinted windows

· Grey & black interior. Excellent conditon

· Body very staright – great paint for age

· VDO headunit – 6” and 6*9” speakers

· Apexi pen TT – AFR, Volt, Temp

· Greddy electronic Boost guage (optional)

· Cyclops 2 stage alarm, remote keyless entry

· Full electrics

· New AC gas (optional)

· Sports steering wheel

· Front bar

Stop/turn

· New R33 DBA slotted rotors, r32gts-t calipers, EBC greens pads,

ADR approved custom stainless steel braided brake lines

· Reconditioned brake master cylinder

. New clutch slave cylinder

· Tanabe sustec rears, Bilstien Fronts. perfect condition

· Adjustable steel castor rods

· New Tyres 15”

· Nolathane rear subframe bushes (pineapples)

Go

· RB25 with 47000km – fresh engine

· Turbo Back Exhaust, 3.5" dump, highflow cat and twin 3” Trust cannons w/ removable baffles

· Hybrid 100mm wide FMIC

· Custom stainless piping

· Relocated oil filler cap on custom rocker covers

· 4” K&N pod airfilter

· High mount T4 manifold w/ 50mm external wastegate and screamer pipe

· 600hp T70 turbo

· Z32 afm in cooler piping

· 460cc GTI-R injectors cleaned and flow tested

· Brand new GTR resistor pack

· 600hp Nippon Denso fuel pump

· DR_DRIFT ECU remap

· EXEDY 2750lb 5 paddle HD Button clutch w/ new flywheel

· 'so far so good' RB20 g/box

· 1.5 way mech. Diff ? spins both wheels, and loves the power

Full service, brake, clutch, engine, g/box and power steering oils and fluids replaced.

New plugs and filters. Full dyno tune for conservative power and fuel efficiency.

Currently running 14psi safely and making 225rwkw and 650rwnm of torque!!.

!! = LS1 5.7lt V8 makes 530nm and xr6T typhoon 550nm at the engine!!

Has been on dyno at 250rwkw and 750nm at the wheels @17psi.

The cruisiest car I have driven, plenty of torque and power off boost. Full boost at 4200rpm @ 17psi and 4400rpm at 14psi.

The reason I run 14psi is that I have put the removable baffles in and this alone drops the boost from 17 –

14 and hence the decrease in power. However this is as quite as a stock exhaust r33 skyline

This is 48% EOI, i fi dont sell it for my asking price i am keeping it as it is so addictive to drive. As we speak

i am planning a methanol injection system for the rb25de, probably go down the road of a 'haul arse race car'. This way more boost more power and lower intake/combustion temps.

few things left to do for the asking price.

Change oil and plugs and filters (these were done 1800km ago, but will get it all fresh)

final tune on united boost 98 - ethanol will allow a more advanced tune and if anything still be a bit safer.

currently has no boost guage - as this car is not a turbo !! but you can have one if you really want

AC GAS - just need a new reciever dryer and some

the usual no time wasters stuff applies. i can take genuine interests for a drive but you will not get a drive

until you have put down your 10% deposit !!

YES THIS CAR IS COMPLIED

this car is registered with the RB25 in it, it is registered until end of August. It will come with RWC but we will

have to swap all the exhaust, turbo, manifold etc. "ALL OF WHICH I HAVE AND IS INCLUDED"

MY ASKING PRICE : $20,000 including RWC AND REG - genuine buyers will know how much all of this costs

and understand how i have spent over $15,000 on top of the cost of the car on the road.

NEW PRICE : $18000. as is, not including RWC. the car passed one 6 months ago, all that needs to be done is to swap all the turbo, zorst and manifold to stock items. These items are included in the price of the car.

PICS - http://www.skylinesaustralia.com/forums/in...opic=109643&hl=

MORE PICS - EMAIL OR PM

Shaun

post-2503-1146462005.jpg post-2503-1146462585.jpg

Edited by shaunr32
Link to comment
https://www.sau.com.au/forums/topic/115683-1988-a31-nissan-cefiro/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...