Jump to content
SAU Community

Recommended Posts

Hi guys,

does anybody knows what tyre size for the 260rs? The factory fitted bbs wheels one. I know its 17" and i got 2 different sizes on the net.

they are 225/50/17s and 245/45/17s dont know which is which. Chasing up some prices for the tyres before the car gets here.Thanks

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/
Share on other sites

Hi guys,

does anybody knows what tyre size for the 260rs? The factory fitted bbs wheels one. I know its 17" and i got 2 different sizes on the net.

they are 225/50/17s and 245/45/17s dont know which is which. Chasing up some prices for the tyres before the car gets here.Thanks

Your tyre placard (fitted when complied) should identify the correct tyre size.

The 225/50R17 and the 245/45R17 are within 5mm of each other in diameter. Also rim width may determine which tyre is a legal fitment.

Your 225's will range in price from $210 to over $400, and the 245's will range between $205 and $500.

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2138536
Share on other sites

Your tyre placard (fitted when complied) should identify the correct tyre size.

The 225/50R17 and the 245/45R17 are within 5mm of each other in diameter. Also rim width may determine which tyre is a legal fitment.

Your 225's will range in price from $210 to over $400, and the 245's will range between $205 and $500.

Check with the compliance workshop that is complying your car, they will most likely know (although being a 260RS they might not) they have access to good tyre prices in most cases so that may save you a dollar or two?

Luke

Edit: How many people on here own a 260? Not sure how much help we lowly RS Four owners can be to you...

Edited by munchdesign
Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2138589
Share on other sites

Your tyre placard (fitted when complied) should identify the correct tyre size.

The 225/50R17 and the 245/45R17 are within 5mm of each other in diameter. Also rim width may determine which tyre is a legal fitment.

Your 225's will range in price from $210 to over $400, and the 245's will range between $205 and $500.

if your tyre size is not the right one wouldnt it effect the accuracy of the spedo?

im trying to get a tyre from good year. The model is GSD3 f1. It a good tyre. preety cheap compared to hankook and nankang for that size.

I dont know what the comploance place will give me for the tyres. I dont want cheap and nasty one.

BTW is rating Y too much for the ccar or right on par? Thanks

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2139016
Share on other sites

if your tyre size is not the right one wouldnt it effect the accuracy of the spedo?

im trying to get a tyre from good year. The model is GSD3 f1. It a good tyre. preety cheap compared to hankook and nankang for that size.

I dont know what the comploance place will give me for the tyres. I dont want cheap and nasty one.

BTW is rating Y too much for the ccar or right on par? Thanks

Check this thread you will find some of the info you are after in here, try seaching the forum also, it seems a bit hit and miss but there is a lot of info on here already.

Cheers

Luke

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2139129
Share on other sites

The bible (TRAA) identifies 'Y' speed rating @ 300km/h.

Whoever complies the car and attaches the tyre placard have a responsibilty to ensure the correct tyre is identified with respect to rolling diameter, speed rating and load rating.

Do not be too concerned about your speed rating, the load rating is the more critical.

For example the 245/45R17 F1 GS-D3 is a 94Y. That is the tyre has a load capacity of 670kg @ a max of 300km/h.

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2139607
Share on other sites

The bible (TRAA) identifies 'Y' speed rating @ 300km/h.

Whoever complies the car and attaches the tyre placard have a responsibilty to ensure the correct tyre is identified with respect to rolling diameter, speed rating and load rating.

Do not be too concerned about your speed rating, the load rating is the more critical.

For example the 245/45R17 F1 GS-D3 is a 94Y. That is the tyre has a load capacity of 670kg @ a max of 300km/h.

which is suited for stagea? Im more concerned about the tyre grip. Load factor ok. Im very particular with tyres i hate michilens. i dont care how good you guys sya it is. it is POS!! so either im sticking with goodyear or perrilis p6(if they stil got them)

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2139689
Share on other sites

Horses for courses. Tyres are a personal choice, some people are brand concious, others price concious. All the major manufacturers have some good tyres in their range. Your F1 GS-D3 is available in the 225/50R17,, but I have no listing for a 245/45R17. But I could recommend the 245/45R17 in the Toyo T1R for example. I personally run a Goodyear Rev Spec RS02 (235/40R18) on my Series II Stagea, and will be trialling the new Dunlop Sport Maxx on another vehicle shortly. I have had some very strong feedback from customers on this new tyre.

Wait until you know exactly what tyre size has been complied for the car and then look at the available options in that size.

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2140143
Share on other sites

if you want to keep the stock speedo accurate, use this website and find some aftermarket tyres to use with any wheels.

http://www.1010tires.com/TireSizeCalculator.asp

As far as buying tyres, just make sure you get same tyres front/rear. Replace all 4 at once. Rotate them maybe ever 6 months to a year, depending how you drive. Ive just rotated mine after 3 months and really needed to do. I do load up the front wheels quite a bit.

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2140498
Share on other sites

they sort it out themselves and fit you the bill.

they will just use the cheapest tyres that are suitable unless you say otherwise.

a

im going to ask them to save the tyres themsekves abd i will give them goodyears GSD3 for $198/tyre 245/45/17s so...his tyre is very good.

the review for t

Link to comment
https://www.sau.com.au/forums/topic/116304-tyre-size/#findComment-2144146
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...