Jump to content
SAU Community

Clutch Master Cylinder Bracing?

etbenno
 Share

Recommended Posts

etbenno Collaborator

etbenno

Posted
Posted

Hey guys

dunno if its just the ceffys ive had or me ;) but the firewall seems to be weaker where the clutch master bolts upto when ya do a five speed conversion from the auto this time around im running a OS twin plate and the firewall flexes like an inch, inch and a half i'm thinkin that if left itd probably crack and make me cry :D plus it feels like the clutch isnt engaging all the way :D sssoooooo I was just wondering if there was such a thing as a brace for the clutch master to stop flex or anyones ideas on how to resolve this problem cheers for any help :P

Benno

Link to comment
https://www.sau.com.au/forums/topic/116810-clutch-master-cylinder-bracing/
Share on other sites
S13Deviat Grand Master

S13Deviat

Posted
Posted

To be safe - Get the firewall welded up but will be a few hundred $$$$

As for braces...NFI havent heard of anything.

A mate just put his foot thru the firewall becuase of this exact reason...literally installed the heavier clutch, drove around for 10 mins then BANG....

BenA31 Experienced

BenA31

Posted
Posted (edited)

hmm i think i need one of these bracing devices also. Mines only a 5 puck brassy and can feel it slightly flexing already - also was a auto to manual converted cef. anyway got a link to where ya can get them?

EDIT: Paid closer attention to it today after this thread. I actually think its just my clutch pedal box thingo twisting slightly with a bit of creaking so prob not firewall afterall. Probally just have to grease it up a bit and have a closer look one day. Meh no biggie. I'm not really fussed.

Edited by skypy12
konect Mentor

konect

Posted
Posted
yer same here konect unless i'm simply oblivious to the fact it may be flexing... OR i dont drive it enough :)

Nah I gave my a real test last night with clutch kicks and pushing as hard as I could on it and there was no way it was flexing :P

etbenno Collaborator

etbenno

Posted
  • Author
Posted

Yeah its the converted ones that do it i had one factory manual and it never flexed at all hmmmm i guess now the mission is to find one of these braces and get the firewall welded just to be safe thanks guys :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...