Jump to content
SAU Community

Hks T51r Bb Spl Turbo Kit - Rb26 Head

SKYPE
 Share

Recommended Posts

SKYPE Rookie

SKYPE

Posted
Posted

Hi All,

This kit is to suit the RB26 Head, so for any of you who have an RB26 or RB26/30 on their cars and you want either big HP or quick ET's or maybe even both then this is for you NOT DREAMERS. The kit includes

HKS T51R SPL Ball Bearing Turbo (traveled 500kms)

HKS T51R BB SPL - 1000 PS Output

COMPRESSOR:

• Wheel- 56 Trim - 76.5 Inducer/ 102.2 Major

• Housing- 100 Inlet / 80 Outlet

TURBINE:

• Wheel- 76 Trim - 82.0 Major / 71.4 Exducer

• Housing- V-Band inlet / V-Band 115.5 mm outlet - 1.00 A/R

HKS T51 Stainless Manifold (new)

HKS GTII 60mm Wastegate (new)

Inlet Trumpet (new)

Speedflow Water Fittings (new)

Speedflow Oil Fittings (new)

As you can see the turbo is the only used part of the kit and was recently checked out by GCG Turbos and said to be "A1 Condition". This turbo has been seen to make 1200HP+.

I have everything in my possession ready to go waiting to make some serious power! If you are genuinely interested either leave a message here or e-mail/ PM me and we can talk further….

To give you an idea this complete set up owes me over $12,000.00 and it is unfortunate that due to some personal financial issues I am going to have to let this go but these things happen.

Looking for $7,500.00 o.n.o NEEDING A QUICK SALE! :)

Regards,

Jimmy.

EDIT:

E-mail [email protected]

Name: James Skype

Location: Brisbane, QLD

Ph Number: PM or E-mail & I will provide my number.

Link to comment
https://www.sau.com.au/forums/topic/116978-hks-t51r-bb-spl-turbo-kit-rb26-head/
Share on other sites
SKYPE Rookie

SKYPE

Posted
  • Author
Posted
HOW MUCH JUST FOR TURBO??????

Turbo $3,000.00 o.n.o

Complete kit reduced to $6,500.00 o.n.o - need the money for other things on the go atm...

This has got to be moved so make an offer to me via PM or e-mail.....

T400 Skyline Community Regular

T400 Skyline

Posted
Posted

Hi

are you the same guy try to sell the turbo kit on performanceforums?

if yes.it sounds very dodge!!

have look here:

http://www.performanceforums.com/forums/sh....php?t=67203377

Hi Everyone,

I have a complete genuine HKS T51r BB SPL turbo kit to suit a FD RX7 for sale. This kit isn’t for the faint hearted and will produce massive top end/ power! Designed for those who are looking for the big HP and or quick ET’s.

The Kit Includes:

HKS T51R SPL Ball Bearing Turbo

HKS T51R BB SPL - 1000 PS Output

COMPRESSOR:

• Wheel- 56 Trim - 76.5 Inducer/ 102.2 Major

• Housing- 100 Inlet / 80 Outlet

TURBINE:

• Wheel- 76 Trim - 82.0 Major / 71.4 Exducer

• Housing- V-Band inlet / V-Band 115.5 mm outlet - 1.00 A/R

HKS T51 Stainless Manifold

HKS GT 60mm Wastegate

Down pipe

Suction pipe

Intercooler pipe

All the necessary fittings and lines for a complete installation

This is all brand new and was going to go onto a Series 7 which I had purchased but due to personal financial issues I had to let go. I would love to hang onto this awesome bit of kit but I am un-sure as to how long it will be before I will get a chance to purchase another RX-7.

If you are genuinely interested leave a message here or PM me and we can talk further….

This owes me nearly $8,000.00 and because I just need to get rid of it and looking for a quick non complicated sale it is on offer for $5,250.00 o.n.o

N.B – This is negotiable and I am looking to sell.

If you have any further questions please don not hesitate to ask.

Cheers!

SKYPE Rookie

SKYPE

Posted
  • Author
Posted
correct me if i am wrong!!

thanks

Hey champ,

Thanks for your concern, but that’s not me! If you have any concerns either PM me or e-mail me easy as that. Otherwise T400 Skyline thanks for bringing this up.

The person on performance forums looks to be by the name of Matt with a totally different e-mail to me also. Similar ad but different person.

It looks like i may have a potential buyer when i touch down back home from business as well so unless his offer is beaten kit could be sold for considerably less so make an offer.

Regards,

James.

ZIL32R Contributor

ZIL32R

Posted
Posted
The person on performance forums looks to be by the name of Matt with a totally different e-mail to me also. Similar ad but different person.

Funny that because I rang the number given by SKYPE (James) and when it went to the message bank the guys name was MATT. Somthing dodgy or can someone explain.

SKYPE Rookie

SKYPE

Posted
  • Author
Posted

Unless someone comes up with a good offer for the complete kit looks like the wastegate maybe sold to ZIL32R and turbo to MR33...

Current offer on the kit is $4,000.00 so someone needs to come up with atleast $6k to take it all home.

T400 Skyline Community Regular

T400 Skyline

Posted
Posted
The person on performance forums looks to be by the name of Matt with a totally different e-mail to me also. Similar ad but different person.

Funny that because I rang the number given by SKYPE (James) and when it went to the message bank the guys name was MATT. Somthing dodgy or can someone explain.

Hi mate

i am not try to be difficult.

but on performance forums.they dont show seller's email.how can you know the email are different compare with you's?

also same reason to sell the Turbo it(financial issues )

and similar ads at same day 9th May.

can you explain??

i am interest the kit as well,but seems very dodgy for me!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...