Jump to content
SAU Community

Stageas In The Uk

RSVFOURUK
 Share

Recommended Posts

RSVFOURUK Collaborator

RSVFOURUK

Posted
Posted

Hi :D

I have just found this site and although I live in the uk thought it would be useful to join as there seems to be much more knowlege about stageas down under than in the uk .

I have got 2 stageas - the first is a completely standard silver rs v four with 45.00 miles with nissan full service history . It seems to have every option they made on it including twin electric sunroofs.I have had the car for about 3 months in the uk and so far have not seen any other even at the skyline meets.

The other . which is currently on a boat somewhere between japan and southampton has a few mods :O

Full original autech body kit inc wider front wings and 17" alloys , colour coded recaro seats . It has been lowered and has adjustable suspension (HKS I think)

Engine has got apexi induction kit and a 3 stage apexi boost system :P , dump valve and sports exhaust .

It also has and a digital readout system ( kenwood) which shows water temp , oil pressue etc .

Would be happy to post pics if thats possible( and someone tells me how to)

Link to comment
https://www.sau.com.au/forums/topic/118138-stageas-in-the-uk/
Share on other sites
Hum@nzee Contributor

Hum@nzee

Posted
Posted

post-27894-1147822861.jpg

Hello - I'm in the UK too - strange that we're talking via Australia! - Still - car looks nice mate - mine's an RS Four V - P reg - very standard, no wing or body kit and the paintwork is tatty but I'm planning a re-spray as soon as funds allow. Which skyline forum are you on in the UK? Good too talk to other owners definitely - and these guys are extremely helpful (shame they’re such a bloody long way away!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • GTSBoy
      Rear Sway Bar Busshings - Holden Astra TS (2002)

      By GTSBoy · Posted

      I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...