Jump to content
SAU Community

Recommended Posts

Hey guys,

Can anyone that has a DVD-MP3 player post:

* make and model of MP3 DVD player

* how long it takes from initial insert of a DVD with MP3s on it to hear the first MP3 (call this "load time")

* how many files (approx) on this MP3 DVD

* the total file size (approx) on this MP3 DVD

I have a cheap ($350!) Sony MEX-R1 DVD player that will read an ISO DVD image and play MP3s off it.

It of course plays video DVDs and regular CDs, I haven't tested MP3 CDs but I'm guessing it will work.

But hearing the first track (after initial insert), or track it was up to (after switch-on), on an MP3 DVD

takes about 60-90 seconds depending on the how full the DVD is. If I start loading the DVD,

but then switch to radio before it has fully loaded, it stops loading the DVD (i.e. loading cannot

be done in the background, and is restarted when switching back to DVD).

Once it has loaded a DVD, the information is cached till the car is switched off or the DVD is ejected -

when switching from another source back to MP3 DVD, it only takes a couple of seconds before it

starts playing MP3s again.

Loading other media (CD-Audio, DVD-Video) is 'normal' - a couple of seconds delay, then sound. It's only DVDs

with MP3s on them that take so long - I'm wondering whether my player is abnormal, or whether they

all do it.

I don't _particularly_ care about audiophile-ness - that is to say, the sound of the Sony unit is just fine

with me :ermm: - I just want to have convenient tunes in my car deck from an MP3 DVD. You'd think that would

be a relatively small ask in this day and age. Please help!!! :):down:

Regards,

Saliya

Link to comment
https://www.sau.com.au/forums/topic/118179-dvd-mp3-player-load-times/
Share on other sites

* make and model of MP3 DVD player

* how long it takes from initial insert of a DVD with MP3s on it to hear the first MP3 (call this "load time")

* how many files (approx) on this MP3 DVD

* the total file size (approx) on this MP3 DVD

JVC KD-DV6105

"load time" would be 10 seconds tops for an mp3-dvd (FULL DISC) from the moment u insert the dvd into the player, to the time it takes for the first song to start playing.

If the disc was already in thee head unit and switch from radio and then back to dvd, it takes 1-2seconds at the most to load and play

-Total of 976 songs

- Disc is basically full

I too have the JVC-KD6105 player and am very happy with it and it's start times. However there is one thing that really annoys me and that is that you cannot fast forward MP3's songs that are recorded on a DVD disk. You can step forward to the next track or even move back to the previous track but you cannot fast foward a song.

This can become pretty annoying when you have a MP3 that goes for 1.5hrs and you are only travelling small distances. Each time you restart your car it goes back to the start of the song and then you cannot fast forward. :)

Other than that I love my player. :P

JVC KD-DV6105

"load time" would be 10 seconds tops for an mp3-dvd (FULL DISC) from the moment u insert the dvd into the player, to the time it takes for the first song to start playing.

If the disc was already in thee head unit and switch from radio and then back to dvd, it takes 1-2seconds at the most to load and play

-Total of 976 songs

- Disc is basically full

I too have the JVC-KD6105 player and am very happy with it and it's start times. However there is one thing that really annoys me and that is that you cannot fast forward MP3's songs that are recorded on a DVD disk. You can step forward to the next track or even move back to the previous track but you cannot fast foward a song.

yeap i hate that as well. After i installed it i noticed that i couldnt fast foward and it annoys me, but apart from that the head unit rocks, there is so many different adjustments you can make.

Mind you when I bought the player, I quizzed the salesman on all aspects of the player including the fast forward (I found the details on teh internet) and he convinced me it would work.

Long story short, it doesn't. Went back to hassle the salesman to find that he didn't work there anymore.

Ohwell, like you said, the player rocks with all it's features. One question, have you tried inserting a DVD movie without having the screen connected? Does the audio still work? Thought this could be useful for music DVD's!!

Sorry to hijack the thread.

yeap i hate that as well. After i installed it i noticed that i couldnt fast foward and it annoys me, but apart from that the head unit rocks, there is so many different adjustments you can make.

Hi guys,

thanks for the responses so far; nobody else reading has a DVD-MP3 headunit?

Sounds like it will be worthwhile taking a DVD full of MP3s down to a dealer and

popping it into every headunit with a stopwatch. If I do that, I will summarise...

Regards,

Saliya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...