Jump to content
SAU Community

Recommended Posts

Hey guys, my car is for sale. Here are the specs:

I have decided to sell my skyline. I have owned the car for 4 years. I am the first ownder in australia. It has been extremly well looked after. I was going to mod my Rb25det but decided against it as i didn't want to start playing with emisions too much. So i searched around for a while and found a RB26, it turned out to be a good one form a gtr v-spec 98' series 3 r33. I this pulled out my other engine which was sold within the first day of advertisment. The the car went off to ICe Performance for a month or so to get it installed. Wasn't cheap but happy with their work. The enigne has around 64k on it now, had 60 when i bought it. The speedo matched and it has 165-170 comp all round so i think the engine is pretty good. It Pulled 180RWKW with just a exhaust. NO Boost or any other mods. I just purchased a brand new power fc and hand controller, i had them installed and dyno tuned, the car made 224rwkw with 9psi of boost through the standard boost controller. i havn't had it over this boost limit. The power fc is only a week old. I also bought a trust opil cooler and remote filter kit but havn't had time to fit them. It has HKS pods, FMIC and a 3"exhaust and thats it as far as mods go. The engine has been serviced two times, and i have put NGK irrifium plugs in it. Has motul oil in it. Just had coolant, brake and clutch flush done. The engine has plenty of potential and is very fast. The car has 98k's on it, but i have just put in gtr cluster and center guages. gtr reads 84k. The car hasn't been raced. Sorry no quarter mile times or anything. The Brakes have been slightl;y upgraded with DBA 4000 XD rotors, green stuff pads and all calipers rebuilt and sprayed in silver. The Wheel are 17" (17x9 front and 17x9.5 at rear) with dunlop 9000 at front and 255 faulken azenis at rear. The azenis tyres are absolutly awome. The suspension is standard hight. The car is whote and has a full Veilside body kit fitted to it. It does however come with a ful gtr kit painted in white that comes with the car. Also i have a spare stcok exhaust system, a standard muffler that will fit to the 3" system via custom flanges, so u can have a quiet car or what ever suits ur tastes. It has a immac interior, cd player and nismo gear shift stick. It also comes with two vinal wrapped seats(recaro replicas) that were never installed due to time constraints and money commitments. These seats look awsome.

The veilside body kit is being removed and the standard full gtr kit is going back on.

Price is 21,000 or TRADE (If it's a better car then i am willing to pay on top)

Comes with 12 month rego.

Contact at [email protected] or on here with a pm and i can give u my mob number so we can talk

Here are the specs listed.

White R33 95'

series 2 front end(no accident history)

Veilside b'kit plus a gtr kit

RB26DETT(fitted in jan)

5Spd

86,999km's

Aftermarket intercooler

Apexi Power FC

HKS pod filters

Strut brace

Cd player

Nismo gear knob

17" rims

Upgraded brakes and all calipers rebuilt

Full years rego and engine is registered with car through vic roads.

post-1334-1150717924.jpg

post-1334-1150717975.jpg

post-1334-1150718031.jpg

post-1334-1150718104.jpg

post-1334-1150718142.jpg

post-1334-1150718200.jpg

post-1334-1150718265.jpg

post-1334-1150718320.jpg

post-1334-1150718360.jpg

post-1334-1150718469.jpg

post-1334-1150718520.jpg

Edited by markjh27
  • 3 weeks later...

OK guys, sorry about that. I was being lazy. I have posted up pics and info.

I have no pics with gtr kit as yet but will later in the week hopefully.

Cheers Mark

Price drop. 24k with 12mnth rego and rwc. Spent 35 k on car including buying it. I have a book that has a service history with old engine and new engine, no expense spared. I has had all new gaskets fitted, rear main seal, gear box, diff, brakes and suspension are all immac condition.

Edited by markjh27
  • 4 weeks later...

hey champ, i only have the front bar of the gtr kit on, the rest is veilside. I can try and orgainse pics for you?? Anybody interested?? C'mon ppls even trade

  • 4 weeks later...
  • 1 month later...

Bump, still avail guys.

I am after a swap preferably, i'd like a r32 gtr, or a r33 gtr both with some or considerable cash on top, or somthing else of interest!!!!! So throw me ur offers and i'll conmsider anything..... I have about 8k to add for a r33 gtr. I have spent at leats 35k on this car including buying it. Ohh and veilside fronmt bar is back on.....

Cheers Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...