Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

R33fourdoor. Ye the black 33 sedan is owned by the owners Mike and Chrsitne Doyle. Very much a pimped car without being pimped.

They have quoted me around the $3800 mark. Thats full repsray, in white and black, all damage repaired. and thats with the intrusion bars being removed and powder coated as they are starting to rust away.

I have heard nothing but the best about them so i want that and its where im going.

As I have been told, if im going to do anything do it with the best parts and dont cut corners.

Edited by R32_4door_drifting

Needing help installing cd player.

Head unit is a Sony Xplod MP3 player. With the top part that slides down.

Will I need to alter the dash at all removing/ instaling this into the space given? Or should it just slide in and out no hassles.

Needing help installing cd player.

Head unit is a Sony Xplod MP3 player. With the top part that slides down.

Will I need to alter the dash at all removing/ instaling this into the space given? Or should it just slide in and out no hassles.

if anything like the 33 you will need to remove the under dash, and surrounding area, not that hard just have to give yourself a couple of hours and plenty of room. need any help just pm

CD PLayer fitted.

Took ages as I had to run a power source straight from the battery. Oh the joys.

Blood sweat and tears went into this and it was just putting a cd player in. My god.

Will take pics tomoz and post them up.

27th car goes into getting painted at JS Bodyworx.

Oh how it is coming along so nicely.

  • 2 weeks later...
Latest update.

Car is in JS BODYWORX getting Sprayed.

I checked it out today and it had primer on it.

Should be getting it back by sunday.

Can't wait.

And getting a set of 17 x 9 dish rims soon aswell.

Brent.

Good work, Panda would be nice.

Think it would look DAMN fine on my stagea.................................................. hhhhhhhmmmm.

stealth wagon, or panda wagon?

:laugh:

Good work, Panda would be nice.

Think it would look DAMN fine on my stagea.................................................. hhhhhhhmmmm.

stealth wagon, or panda wagon?

:D

Tangles, I could go reverse panda cos mines already black! ha ha!

Check out boostworx at panorama for your auto to manal conversion.

My laurels in there getting a full RB25DET conversion

5Spd manual converison

fitting a proper handbrake (had the crappy foot parkin brake)

new adjustable coilovers

R33 front brakes

3 inch exhaust with resonator and cannon from cat back for $5000.

They quoted 1200 for a full RB25DET conversion only on my mates R31 nothing else so it would be a fair bet that they would be pretty cheap.

my cars only been there a week and should be there for another week.

Boostworx 82990621 ask for shaun

Edited by RB25DETC33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...