Jump to content
SAU Community

Recommended Posts

Tip for the day...don't buy at BP Toowong (cnr Jephson & Sherwood Rds)...their fuel is the dearest around. Regular unleaded hovers between 133.9 and 135.9 and with Ultimate roughly 10c per litre more expensive, I may as well live in Rocky with Cy :thumbsup:

I can drive to Graceville (5 mins away) and pay the above prices for Ultimate and the other good thing about the BP at Graceville is that its a 7/11 and therefore WILL accept the BP fuel voucher from Action supermarket.

The only other BP I have found that will accept the BP fuel vouchers is the BP on Fairfield Rd at Yerongpilly (sp?) or Yeronga (not quite sure of where the suburb changes).

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

I got the whole docket thing worked out too, and we dont have to spend anymore than we should on groceries:

1. Shop at Action and buy normal stuff, no meat or fresh produce, get 4c/ltr off.

2. Use 4c/ltr docket at BP, there is only 1 BP in rocky that has ultamite, and get tax invoice.

3. Shop at local foodworks and buy meat and fresh produce only, which is usually the cheapest anyway, and get another 10c/ltr to 15c/ltr off the fuel receipt.

Lucky everything is very close here in rocky, so instead of paying the usual ~150c/ltr for ultamite, I end up paying ~135c/ltr, which aint bad, too bad the Stagea is a tank and drinks faster than a russian on death row! Meh the price I pay for driving a slow volvo.............. :thumbsup:

for those skyline owners in caboolture/morayfield... the best prices are usually at the Shell servo along morayfield road... yesterday they had fuel (normal 92octane) for $1.21 where as the caltex up the road had it for $1.36... i lined up for fuel at the shell yesterday, paid $1.31 for optimax...

damn fuel prices... althought i get a pay increase in september just to accomodate for those prices :thumbsup: and there aint no way i am going to be selling my gt-r... when i get it that is

Tuesday is the best days in cab/morayfield for fuel... usually pretty cheap...

Edited by gtr_r32_reddy
The only other BP I have found that will accept the BP fuel vouchers is the BP on Fairfield Rd at Yerongpilly (sp?) or Yeronga (not quite sure of where the suburb changes).

That is my local!!! woot..It is just barely in Yeronga It usually has pretty decet prices too

Tip for the day...don't buy at BP Toowong (cnr Jephson & Sherwood Rds)...their fuel is the dearest around. Regular unleaded hovers between 133.9 and 135.9 and with Ultimate roughly 10c per litre more expensive, I may as well live in Rocky with Cy ;)

I can drive to Graceville (5 mins away) and pay the above prices for Ultimate and the other good thing about the BP at Graceville is that its a 7/11 and therefore WILL accept the BP fuel voucher from Action supermarket.

The only other BP I have found that will accept the BP fuel vouchers is the BP on Fairfield Rd at Yerongpilly (sp?) or Yeronga (not quite sure of where the suburb changes).

BP Cannon Hill cnr Creek & Wynnum Rds accepts them too.

Paid 138.9 for Ultimate at Toowong on Monday arvo - must've got lucky with end of long weekend

Only the ones with two heads :domokun: I tie a balloon with a smiley face on it to my shoulder to fit in :(

139.1c/ltr this morning

Weird thing:

136.9c/ltr in rocky last night, and it was 130c/ltr in Yeppoon last night as well....

After 9pm every day seems to be the right time to shop.

Im sure i could arrange express post for you Cy It could be there by next day arvo ? :whistling:

Edit: I just remembered where you lived

It will be there the next day the following week :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...