Jump to content
SAU Community

Recommended Posts

It's only happened since Bosimporting changed manufacturers for their SS split front/dump pipes, basically instead of having an open mouth and a splitter, on the dump pipe flange, they've changed it to a pipe that actually fits inside the exhaust outlet on the turbo (to achieve a good seal).

As most of you know the highflowed turbo has a much larger exhaust outlet, so the pipe on the dump pipe flange is way too small now.

What I had to do was, take my split front/dump and get the pipe removed and the hole enlarged for the exhaust outlet, and have a splitter welded in.

Heres some pics that will help explain it.

The original style, with open mouth and splitter (will suit highflow)

post-17348-1150439647.jpg

And the new style (which i think is only with the SS one) Give Michael @ BOS a call and he'll confirm it,

they may be doing them all like this now, i don't know.

post-17348-1150439913.jpg

Edited by beastien
  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Could you please explain? i've just gotten myself a hi-flo, and i thought they used the exact same turbo housing as the standard turbo. why would this mean any standard dump pipe wouldn't work? i've got a custom mild steel dump, nothing flash but i just don't want to have to fork out for mods to my exhaust if this turbo is different

The current trend in split dumps is to extend the turbine pipe past the flange and inside the turbine cover. It fits neatly/tightly inside the turbine cover. This stops any chance of wastegate exhaust contaminating the flow (causing turbulence) from the turbine. The more common style has a little bridge that is welded to the dump pipe flange and stops 99% of the cross contamination. The pipe extension is a better system, it stops 100%.

The problem with the pipe extension style of dump is when you get the turbo high flowed they machine out the turbine cover and the extension pipe is then too small to fit tightly/neatly into the larger hole.

So if you are intending to get a high flow later on you need to order the more common style with the bridge that fits both standard and high flow turbine covers.

:rofl: cheers :)

I have just ordered a SS split dump with the pipe extension. I do not intend to hi-flow the turb so am happy with it as is. However, is there any reason in the future why the pipe could not be shortened from its current length, or modified to suit?

ahh, i get it. no worries on my end then, i don't have that flange. old school!
However, is there any reason in the future why the pipe could not be shortened from its current length, or modified to suit?

It can be modified, this is what i had to get done, the pipe can just be shortened, but the hole has to be enlarged to suit the larger exhaust housing outlet on the turbo, and a splitter welded in to separate the wastgate gasses.

It was basically a big hassle for me, had to take the pipe to get modified, took a couple of days, cost $150, and was far from a straight swap over, which installing a highflow normally is.

Just my angle, I don't think you would go from what you have to a split now Brendan but maybe from standard this is a better option?

Luke

For sure; always comes down to budget & cash at hand, tho.

So, if you've got $500 to grab a split dump system then sure do it.... when I did my first bout of tuning it was all about being on a tight budget at the time, and still is.

I can sell my dump pipe at anytime and uprade, but really at this stage of the cars tune (160akw) its a hole and flows thru exhaust gasses pretty damn well for its price.

Just waiting until the time is right. :(

ok, this infromation is great thanks for the responses, but the turbo that is on my car is at GCG GT30, will i still have to modify the dump?

If you can get the pipe with an open mouth and splitter (like the first of the pictures i posted) it'll fit no worries.

Talk to michael at BOS Importing, tell him what turbo you have, and i'm sure he will sort it out for you.

well i just picked up my exhaust from Unique AutoSports in castle hill,

i got the catco metal inside cat, and a mild steel split dump pipe, with ceramic coating.

I spoke to John at UAS, he is very helpful and knows his stuff.

anyways, here are some pics

06-06-19_19-02.jpg

06-06-19_19-04.jpg

06-06-19_19-03.jpg

EGA when you get the dump and cat fitted can you please let us know whether it is a noticeable power upgrade?

How did the front mount feel once fitted over the side mount?

Also is the dump that you bought suit Hi Flow Turbo`s?

Edited by FLYSLY
Hey Ega, dump pipes are like people, they dont breath too well with plastic bags over their heads. :D .....hah ha :huh:

I know, it's late and I'm tired...

lol, i'll try to remember to take it off when i get it installed Darrin.

EGA when you get the dump and cat fitted can you please let us know whether it is a noticeable power upgrade?

How did the front mount feel once fitted over the side mount?

Also is the dump that you bought suit Hi Flow Turbo`s?

yeah no worries. i'll post it up once i get it done

front mount made a slight difference but at the stage im at with mods, it is mostly a cosmetic upgrade, if i was making more power then im sure it would make more of a difference.

will suit high flow fine

sweet well i got a pm from batmbl today and he said that there will be a group buy on stainless dump/front to suit r33 and 32 stags etc... soon so will be purchasing one then

the stainless steel one from BATMBL is not suitable for a high flow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...