Jump to content
SAU Community

Recommended Posts

I have the Following parts for sale that i have no need for as i no longer have a GTR and these parts are wat i have in my garage and need to go

KIT TO SUIT RB26 - Full twin turbo KIT (aftermarket) , 2x BB GT2840 turbos and Manifolds to suit , Including Wastegate (55mm) , Dump pipes , screamer pipe , Braided lines (water and oil) , and intercooler pipes . the turbo kit has done around 7,000 k's of street use and has ran a 10.6 down the strip . All is in perfect condition , manifolds were made custom with the rear turbo high mounted and the front turbo low mounted .

VERY CHAEP at this price

$6,000 neg

- 1 Set of Wiesco forged pistons , 87.0 mm , to suit RB26 in good used condition , like new .

$ 700

- 1 set of Wiesco forged pistons , 88.0 mm , to suit RB26 also in good condition with low k's like new .

$ 700

- 1 set of stock RB26 rods that have been Shot peined and have ARP rod BOLTS

$ 500

- 1 set of HKS cams , 290 duration with 11.0 lift , also done low K's ,

$ offers

1- GTR r33 gear box in perfect condition , gear box only ...

$ 1800

1- SX Fuel regulator , in the box never used

$ 350

1 - Bosch Fuel Regulator with braided line

$ 160

2 - Defi gauges in BF style (1 boost , 1 oil temp ) gauges only

$ 200 each

1 - R32 GTR seat (drivers side) in good condition

$ 350

1 - RB-26 single throttle body conversion kit,85mm throttle body is

new,manifold,spacers (to replace original thr/bodies) can use std 300zx

accelerator cable!! bolts in perfect.

$1500

1 - set of larger stock throttle bodies , have been made larger to 48.50mm , never used , new condition .

1-set (3pcs)

$ 750

1- ARC Hood Panel to suit r32 brand new in packet .

$ 130

1- set of RB26 coils (6pcs)

$ 400

1 - set of RB26 Injectors (6pcs)

$ 300

1 - set of HKS camgears to suit RB26 used .

$ offers

1 - Full set of stock Valves from RB26 , Valves only .

$ offers

1 - 3" stainless muffler

$ 100

1- Recaro Race seat (fix back) 2.5 kg carbon kevlar seat .

$ 1000

1- Custom Fuel surge tank

$ 100

2 - stock RB26 heads in near new condition , bear heads only . (no cams/valves)

$ 900 for one (head only) , 1100 for the other head (head only) .

(will also sell heads with valves/buckets/retainers for extra)

All parts are LOCATED on the gold coast

Would perfer pick up , will post at buyers expense .

Please contact mark on the following details for more information .

thanks

# 0410 657 805

e-mail - [email protected]

Have posted most of the important pics up , if other pics are needed please let me know .

thanks

post-27715-1150952974.jpg

post-27715-1150953039.jpg

post-27715-1150953065.jpg

post-27715-1150953089.jpg

post-27715-1150953145.jpg

post-27715-1150953174.jpg

post-27715-1150953195.jpg

post-27715-1150953219.jpg

post-27715-1150953255.jpg

post-27715-1150953291.jpg

post-27715-1150953322.jpg

post-27715-1150953420.jpg

post-27715-1150953452.jpg

post-27715-1150953488.jpg

post-27715-1150953539.jpg

post-27715-1150953746.jpg

post-27715-1150953781.jpg

post-27715-1150953834.jpg

Edited by 2jz-180

the price for the HKS cam Gears are $250 for the pair ... thanks guys ... and please don't make stupid offers as i have recieved in the last few days .. thanks

I've always been interested, how hard is it to fit an r32 gtr seat into an s13?

it's very easy to fit a GTR seat into an S-13 as that wat i have and thats wat i had the seat in , 3 of the 4 standard bolt holes line up just have to drill a new hole for the outside back mounting point :wub:

will the wiseco pistons fit an rb25......

Not sure .... Not an engine builder but i'm sure they could be made to fit as long as your block is preped for that size piston

Pic of the GTR Gearbox please, interested.

Don't have pics of GTR box , but don't really see how that will help you ? as all GTR Gear box's look the same on the outside , it's whats inside that counts :D

Hey, what size are the fittings on the SX regulator?

I'm assuming its rising rate?

yeah it is rising rate , and not sure on size of fittings , but thats not a hard thing to work out when fitting to the car , might have to buy a few $2 brass fittings at the worst :P

Edited by 2jz-180
1:1 rising rate?

how much do you want for postage for the SX regulator to Melbourne (3079)?

you got any mounting brackets or anything?

yes it has the brackets in the box , never used ... 1:1 i think , 370 should cover post ? not sure how much post is to melb ? just $350 plus post which will be somewhere under $20 i'm guessing

interested in the gtr injectors. what condition are they in?

good condition as stated in post .... :) for best responce call :)

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...