Jump to content
SAU Community

Recommended Posts

I have the Following parts for sale that i have no need for as i no longer have a GTR and these parts are wat i have in my garage and need to go

KIT TO SUIT RB26 - Full twin turbo KIT (aftermarket) , 2x BB GT2840 turbos and Manifolds to suit , Including Wastegate (55mm) , Dump pipes , screamer pipe , Braided lines (water and oil) , and intercooler pipes . the turbo kit has done around 7,000 k's of street use and has ran a 10.6 down the strip . All is in perfect condition , manifolds were made custom with the rear turbo high mounted and the front turbo low mounted .

VERY CHAEP at this price

$6,000 neg

- 1 Set of Wiesco forged pistons , 87.0 mm , to suit RB26 in good used condition , like new .

$ 700

- 1 set of Wiesco forged pistons , 88.0 mm , to suit RB26 also in good condition with low k's like new .

$ 700

- 1 set of stock RB26 rods that have been Shot peined and have ARP rod BOLTS

$ 500

- 1 set of HKS cams , 290 duration with 11.0 lift , also done low K's ,

$ offers

1- GTR r33 gear box in perfect condition , gear box only ...

$ 1800

1- SX Fuel regulator , in the box never used

$ 350

1 - Bosch Fuel Regulator with braided line

$ 160

2 - Defi gauges in BF style (1 boost , 1 oil temp ) gauges only

$ 200 each

1 - R32 GTR seat (drivers side) in good condition

$ 350

1 - RB-26 single throttle body conversion kit,85mm throttle body is

new,manifold,spacers (to replace original thr/bodies) can use std 300zx

accelerator cable!! bolts in perfect.

$1500

1 - set of larger stock throttle bodies , have been made larger to 48.50mm , never used , new condition .

1-set (3pcs)

$ 750

1- ARC Hood Panel to suit r32 brand new in packet .

$ 130

1- set of RB26 coils (6pcs)

$ 400

1 - set of RB26 Injectors (6pcs)

$ 300

1 - set of HKS camgears to suit RB26 used .

$ offers

1 - Full set of stock Valves from RB26 , Valves only .

$ offers

1 - 3" stainless muffler

$ 100

1- Recaro Race seat (fix back) 2.5 kg carbon kevlar seat .

$ 1000

1- Custom Fuel surge tank

$ 100

2 - stock RB26 heads in near new condition , bear heads only . (no cams/valves)

$ 900 for one (head only) , 1100 for the other head (head only) .

(will also sell heads with valves/buckets/retainers for extra)

All parts are LOCATED on the gold coast

Would perfer pick up , will post at buyers expense .

Please contact mark on the following details for more information .

thanks

# 0410 657 805

e-mail - [email protected]

Have posted most of the important pics up , if other pics are needed please let me know .

thanks

post-27715-1150952974.jpg

post-27715-1150953039.jpg

post-27715-1150953065.jpg

post-27715-1150953089.jpg

post-27715-1150953145.jpg

post-27715-1150953174.jpg

post-27715-1150953195.jpg

post-27715-1150953219.jpg

post-27715-1150953255.jpg

post-27715-1150953291.jpg

post-27715-1150953322.jpg

post-27715-1150953420.jpg

post-27715-1150953452.jpg

post-27715-1150953488.jpg

post-27715-1150953539.jpg

post-27715-1150953746.jpg

post-27715-1150953781.jpg

post-27715-1150953834.jpg

Edited by 2jz-180

the price for the HKS cam Gears are $250 for the pair ... thanks guys ... and please don't make stupid offers as i have recieved in the last few days .. thanks

I've always been interested, how hard is it to fit an r32 gtr seat into an s13?

it's very easy to fit a GTR seat into an S-13 as that wat i have and thats wat i had the seat in , 3 of the 4 standard bolt holes line up just have to drill a new hole for the outside back mounting point :wub:

will the wiseco pistons fit an rb25......

Not sure .... Not an engine builder but i'm sure they could be made to fit as long as your block is preped for that size piston

Pic of the GTR Gearbox please, interested.

Don't have pics of GTR box , but don't really see how that will help you ? as all GTR Gear box's look the same on the outside , it's whats inside that counts :D

Hey, what size are the fittings on the SX regulator?

I'm assuming its rising rate?

yeah it is rising rate , and not sure on size of fittings , but thats not a hard thing to work out when fitting to the car , might have to buy a few $2 brass fittings at the worst :P

Edited by 2jz-180
1:1 rising rate?

how much do you want for postage for the SX regulator to Melbourne (3079)?

you got any mounting brackets or anything?

yes it has the brackets in the box , never used ... 1:1 i think , 370 should cover post ? not sure how much post is to melb ? just $350 plus post which will be somewhere under $20 i'm guessing

interested in the gtr injectors. what condition are they in?

good condition as stated in post .... :) for best responce call :)

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks guys! Some pics attached 😋
    • Big enough for you, Jackie, and some puppers mate! I vote some GSDs, but I am biased   How big of a block is it on?
    • Well, fun day was had, I finally found a house that will do me just fine, 1980's brick build, but with full fresh renovations, plus new colour bond fencing all round so puppies are incoming 🐕, and water tanks for the garden, and it's located in West Goulburn..... @Duncan 🫡, so day trips to Wakie to watch cars going Zoom will be on the cards In the end it cost well under my budget and was actually better than alot of the more expensive joints I was looking at, it is in a good area, close enough to the shops, public transport, and the Wollondilly River Weir,  and the great walking paths along the river, but far enough away from town to see minimal traffic The deposit is dropped, the conveyancer is conveyancing and I should get the keys in a week or 2 as the property is currently unoccupied  As with everything I own, I'm doing up a modifications list, as it doesn't have solar, that is first up on the big list, all of the panels and enough batteries to keep the joint warm, or cool, followed by a largish carport out the front, the small list, which will start as soon as I have keys, is some security stuff, like cameras, screens, and the usual "crazy prepper" additions that weird old people like (mouse holes to stick shot guns out of, and the usual man traps that the average person installs for the unsuspecting and unwanted guests 🤣) The gardens front and back are OK, but, not to my standards or liking, so landscaping will be a fun job to start getting into, so when spring is sprung I'll do a heap of planting, lots of natives and vegetables is the plan, the old owners were more "Old English Garden" type, so basically Roses and other weird looking things that are destined for the green waste bin One thing that is staying garden wise is a nice established hedge out the front, it is about 5 foot tall and covers the whole front of the property from prying eyes As for the car hoist, the roof in the garage has some height to it, but, I'll need to get an installer out to see what can be done, width wise may be a issue, but my building inspector will be getting back to me over the next week with his recommendations  Small, but cosy     
    • I tried to get in contact before I went to QLD you didn’t respond, then I tried to contact you in r31 club.  I thought you fell off the earth or something haha.  I will grab it off you but unknown when I will be up that way 
    • I think that might be in the question. He is going very low, and I think the standard GTR ones are simple tripod joints (like the rear NA/S chassis ones), not proper CVs (like R chassis turbo/GTR ones). Proper CVs take the misalignment better than tripods.
×
×
  • Create New...