Jump to content
SAU Community

good price on rims/tyres?

GOTRICE

By GOTRICE,
in Western Australia

 Share

Recommended Posts

hks-s14 Collaborator

hks-s14

Posted
Posted

Zanda - I have Sumitomo's on my s14 rims, 225/50/16. The S14 rim is the same as the r33.

One thing I have found is that they are quite grippy, however go off when things get really hot, also their sidewalls are not as stiff as some.

As I do a bit of motorkana work I notice this, but if you do all your driving on the street, you will more than likely be happy with them.

Jawid as Westate Autobahn (Newcastle St - near tunnel entrance East Perth side) does excellent prices on these - as well as rims.

  • 1 year later...
Mr Eps Grand Master

Mr Eps

Posted
Posted

GOTRICE do you have GOTRICE on your number plate?

if so my mate wanted that plate and i was driving him around once in my old car and he politely told you "I WANTED THAT PLATE AND YOU GOT IT I HATE YOU!" and you laughed and sped away upon your noble steed, this would have been about a year ago in osbourne park...

anyway, try Mr Mag in morley, he often has cheap rims, whoever said try the smaller shops is on the money.,... there are a lot of "ma n paa" tyre shops around morley so i suggest have a look around morley?

but ROH adrenalin? just steal them off a commodore! all commodores have them, JKS

DiPsHiT Contributor

DiPsHiT

Posted
Posted

haha i got tyres yesterday, nuffin that hotshit like what u guys are lookin for i dun think, but i didnt realli find ne of em (in morley) very helpful, i think probably warrens tyres next to jesters on walter rd and bridgestone were most helpful to me... others didnt seem as interested in doin business... jus my view =)

Mr Eps Grand Master

Mr Eps

Posted
Posted

Warren's tires! yeah that's the guy, yeah he's really good... did me $10 second hand 70% tread tyres when my car had a lickie for bald fronts...

maybe he's nice for he is so desperate for business?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...